|
Tender For Development Of Storage Plot Near Gate No.2 Alongside Creek; 1 PART A- Development of plot, drain, concrete road and compound wall(Sl No.1 to 51.04)Providing single under reamed bored compaction pile 300 mm dia 10mtr. Longwith reinforced cement concrete of M-20 grade using 12mm size black hard granite (C.B) stone chips, boring from existing ground level with removal of obstruction if any, using bentonite,providing required reinforcement as per drawing making the end of the cage to Conical shape, welded properly, providing 750mm dia under ream at appropriate level and disposal the boring earth from work site with supply of all labour, T&P, taxes, Port enry fees, hire & running charges of all machineries reuqired for the work etc. all complete excluding GST and as per direction of Engineer in charge (excluding cost of reinforcement steel ). 2 Cutting pile head upto cut off level as specified and disposing the same leading 10.00 mtr away from the work site to dump including supply of all labour , material, taxes tolagge excluding GST etc all complete. 3 P.C.C(1:3:6) of using 40mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge 4 Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, port entry fees, etc. all complete but excluding GST as directed by Engineer-in-charge 5 F&P 6 Wall 7 Beam, column 8 Roof 9 C.C. M20 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting with40 to 60 neddle vibrator, curing with cost and supply of all materials, labour, T&P, taxes,tollage, royalties,etc. all complete but Excluding GST as directed by Engineer-in-charge. 10 Providing & laying quarry dust of aprroved as sub-base in layers not exceeding 225mm thick each watering and compacting to the required density in O.M.C with Vibratory Roller with supply of all material labour transporation hire and running charge of equipments, taxes , tollage ,royalties etc all complete but excluding GST as directed by EIC 11 Providing, laying, spreading and compacting stone aggregates of IRC Gr I(90 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber,applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 12 Providing, laying, spreading and compacting stone aggregates of IRC Gr II(63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling withvibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transporation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as directed by EIC 13 Construction of dry lean cement concrete subbase over a preapred subgrade with coarse and fine aggregate confirming to IS:383, the size of coarse aggregate not exceeding 25mm., aggregate cement ration not to exceed 15:1, aggregate gradation after blending to be as per table 600.1, cement content not to be less than 150Kg./Cum., optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10MPA at 7 days, mixed in a batcking plant, transported to site, laid and compacting with vibratory roller 8 to 10 ton capacity , finshing and curing as per clause 601 of MoSRT&H specification for road & bridge works (4th revision). 14 Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc., complete including cost of all materials,labour, T&P, tollage, taxes excluding GSTetc, all complete as directedby the Engineer In Chrage. (N.B. : No payment will be made for overlapping.) 15 Cement concrete of M-30 grade of PQC by using Crusher broken hard granite chips of 12mm to 20 mm size of approved quality for RCC road work, mixing in a Batching plant, transporting the concrete by any approved means, hoisting, laying on road pavement slabs in panels of required size, providing thermocol at top 50 mm of the panel joints so as to create a gap of 12mm between panels, compacting by mechanical vibrator with 60mm needle vibrator, finished smooth to the exposed surface to proper grade and camber, texturing the top surface by brooming with wire brush, curing by ponding, barricading the area for proper safety of the fresh concrete without obstructing the traffic, etc with supply of all materials, labour, T&P, tollage, all transportation charges, engagement, hire & running charges of all machineries, taxes excluding GST and excluding cost of formwork, cost of joints, cost of steel & labour charges for bending & binding of steel etc all complete as directed by Engineer in Charge. (N.B. : 1)Two separate Mix Design shall be conducted with different Cement brand for RCC work & Barricading the site if required.2)material testing cost borne by contractor.)without Pavor sensor 16 Supplying & forming 12mm wide x 85mm deep longitudional joints by fixing 12 mm dia 640mm long HYSD bars @ 450mm C/C painted 50mm at center with anti-corrosive paint including providing & fixing bitumen paper, painting one side of concrete surface (250mm thick) with bituminous black paint, cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials, reinforcement, T&P, labour, Hire and running charges of all machineries, safety measures, taxes excluding GST etc., all complete as directed by Engineer-In-Charge. 17 Supplying & forming 12mm wide x 60mm deep contraction joints by fixing 32 mm dia 450mm long mild steel round bars @ 300mm C/C including painting two third of the bars with anticorrosive paint & covering the same with 125 micron polythene fitted & cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes excluding GST etc. all complete as directed by Engineer-In-Charge. 18 Supplying & forming 25mm wide x 250mm deep expansion joints by fixing 32 mm dia 450mm long mild steel bars @ 300mm C/C including painted 275mm length of bars with anti-corrosive paint & covering the same with 125 micron polythene fitted and HDFC/G.I. cap of 100 mm long at the other end including fixing 25mm thick & 220 mm deep joint filler Board (Shalitax or equivalent) painting one side of concrete surface with bituminous black paint & sealing the groove with bitumastic filler etc, all complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes excluding GST etc., all complete as directed by Engineer-In-Charge 19 Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe 500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). 20 Preparing the Structural Member surface with scrappingwith scrapper, wire brush, sand paper with cleaning the surface and spray painting the same with two coats of coaltar epoxy paint over a coat of inorganic zinc silicate primer of approved quality upto a height of 12m, etc. complete including all staging, scaffolding, labour, machineres, all equipments, safety of workmen, all taxes but excluding GST,materials, fuel, brushes, tools, port entry fees etc. complete as directed by the Engineer-in-charge. 21 Supplying high strength M20 bolts of class 8.8, 700mm. long anchor bolts as shown in the drawing conforming to relevant Indian Standards with suitable Hexagonal nuts with washers and fixing in position the same in column pedestals while concreting including welding the bolts to the column pedestal reinforcement including all materials, labour, tools, all taxes, port entry fees, equipments, transportations, fuel, etc. completed as directed by the Engineer-in-charge. 22 Supplying the structural steel of TATA/ SAIL/ RINL or any approvedmake for vertical members/ horizontal memeber/ bracing or for any other usage as a structural member as specified by the Engineer in-charge,fabricating, welding at the locations or as directed and hoisting joists and fabricated structural members and placing in position with proper alignment to the existing net barrier structure upto a height of 12m as directed with engaging heavy machineries for lifitng, shifting of structural members or any other useincluding transportation, handling, cutting, welding the materials/ structural with hire & running charges of welding machine and its accessories, all labour, testing charges, materials, cutting/drilling holes, fuel, tools and other equipments, tackles, gate entry fees, taxes, tollage, staging/ scaffolding, safety of workmen wherever necessary, etc. excluding GST complete as directed by Engineer-in-charge.[N.B. : (i) Payment shall be made as per IS Code, (ii) No wastage shall be paid, (iii) Invoice of material procurement must be deposited] 23 Supplying ,fitting ,fixing of punched tape concertina coil of diameter 610 mm having 51 turns in one coil and 6.00 mtr length to be stretched manufactered out of 19 mmx0.5 mm thick steel strips and 9 nos horizontal razor barbed Tape(RBT) made of 2.5 mm thick spring steel core wire and weight 80 gms /Rmt with 18 to 25 micron zinc coating over the coil &RBT,both materials having tensile strength of 1620 N/mm2, both are dipped in corrosion preventive fluid , fixing with angle posts section with G I stapples or GI clips /wires to retain horizontal with supply of all material labour T&P taxes stagging etc all complete but excluding GST as directed by EIC 24 Dismantling steel work in built up section upto a height of 12min angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc including dismembering and stacking the same at work site with supply of all labour, materials, T&P, machineries, staging, safety of workmen, scaffolding, all taxes but excluding GST, Port entry fees, all transportation, loading & undloading charges etc. all complete as directed by Engineer-in-charge. 25 Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour,T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge 26 12 MM thick Cement plaster with cement mortar (1:4) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P,staging, scaffolding, watering, curing, taxes,tollage, royalties, etc. complete but excludingGST as per direction of Engineer-in-charge 27 Dismantlingbrick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50mwith supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 28 Dismantling 2.5cm thick grading concrete from the roof slab and cleaning the surface lowering and cleaning the debrises within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 29 Dismantling RCC from the roof slab,Chajja,beam and cleaning the surface lowering and cleaning the debrises within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 30 Removing old cement plaster from walls including raking out joints 12mm deep including stacking the useful materials for reuse and removing the debris within 50mwith supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 31 Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.Excluding GST. 32 Filling the low laying area with saline sand or dreged spoil as per required level in layer wise ,each layer not exceed 1mtr.,watering ,compacting with VRR to achive OMC etc all complete as directed By EIC 33 Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge.Excluding GST. 34 Supply of 32mm thick single/double leaf seasoned piasal wood with anti termite treated paneled Door shutters having both side styled moulded having bottom rail of 200 mm thick, top rail 100mm thick ,middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats,fixing at position etc all complete . including cost of all materials,labour, loading & unloading Charges,all taxes,transportation charges,stacking at site store etc. all complete as directed by Engineer In Charge.(Excluding GST) N.B.- Size & design decided by the departmentas per requirement at site. 35 Supplying fitting, fixing fully glazed aluminum framed openable/Sliding windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.Excluding GST. 36 Supplying, fitting, fixing of32 mm thick WPC (Wood Polymer Composite) solid doors/window/ventilator shutters of required thickness & size with required fittings ( T-bolt,SS hinges,SS handles,SS Aldrops & SS screw etc.) including cost of loading & unloading charges.With supply of all labour , materials, T&P, all taxes, transport charges, etc. complete as per direction of Engineer-in-charge (Excluding cost of GST). N.B. Colour & design decided by the department. 37 Supplying, fitting & fixing of WPC (Wood Polymer Composite) solid frame for doors/window/ventilator of required Frame size (100mm X 75mm)as directed including fitting, fixing with using SS 150mm long anchor bolt with supply of all fittings,including cost of loading & unloading charges.With supply of all labour , materials, T&P, all taxes, transport charges, etc. complete as per direction of Engineer-in-charge (Excluding cost of GST). N.B. Colour & design decided by the department. 38 Providing, supplying, fitting, fixing of M.S. grills for windows of approved quality & design including fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge. Excluding GST. 39 Supplying fabricating and fixing knitted high strength new wind screen mesh up to a height of 12m, stretched to the extent possible to avoid any sag or crease any firmly fixed in between the steel framework erected.M.S flat 50mm x 4mmshall then be placed over the knitted fabric at an interval not exceeding 1000mm in the horizontal and vertical directions.The existing frame work and the steel strip with the knitted fabric fixed in between shall be bolted firmly with 6mm. dia. G.I. bolt and nuts at spacing not exceeding 300mm while placing the fabric in between frame and M.S flat. The fabric shall be folded all around by at least 25mm so as to act as stiffner. If required the fabric shall be joined together with stitching by double folding the fabric and make stitching with the lubricated, twisted polyster thread as permanufacturers specifications and as directed including all labour, materials, all testing charges, fuels, tools, nut & bolts, scaffolding, transport, handling, fabrication, stitching, tying, port entry fees, all taxes, excluding GST etc all complete but excluding the supply fabrication and erection of steel and M.S Structures as directed by the Engineer-in-charge.N.B. :(1) Every consignment shall be supported by manufacturer’s certificate, as this is a pre-requisite for acceptance. (2) Payment for knitted fabric will be made for only for the area covered by such fabric. NO payment for folding or overlapping and wastage of fabrics. [NOTES : (I) If the knitted fabric strips are stitched together, this should be done using a double fold and stitching should be done using lubricated, twisted polyster thread of required thickness & (II) The fabric shall be stretched as per the manufacturer’s specification before fixing to the frame to avoid any sag or crease] (III) In case the specified M.S section is not available in market, the neerest alternative section may be used after approval of the Engineer-in-charge.Technical Specification of Knitted Fabric Net.(1) MATERIAL:-high strength HDPE monofilament yarn and UV stabilized fabric. (2) Size and weight:-minimum 4 gauge thickness and minimum 275 gm/sqm with eyelet or selvage at both ends. (3) Colour- Green/ Black or any other approved by Engineer in-charge. (4) Shade factor(Light Transmission)-60% Maximum.(5) No of stitches in any one direction :- 3nos/cm. (6) Tensile load before UV exposure machine direction :-350-370 N/mm, Transverse direction :-1010-1020N/mm. (7) Tensile load after UV exposure machine direction :-340-350 N/mm,Transverse direction :-970-1000 N/mm. (8) Resistance :- withstand at 1000C . (9) Elongation before UV exposure machine direction :-minimum 10%,Transverse direction :-minimum 20% 40 Earthwork in excavation in all kinds of soil with initial lead & liftwith dressing, leveling & compacting the foundation bed, breaking the clods to maximum 5cm to 7cm, disposing the material at a designated place and keeping the required quantities for back filling with cost of labour, T&P, port entry fees, transportation, loading at one end & unloading at other end, all taxes,excludingGST all complete as per the direction of Engineer-in-charge. 41 Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus,Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. 42 Painting two coat with acrylic base plastic emulsion paint over one coat primer of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding,etc. complete but excluding GST as per direction of Engineer-in-charge. 43 Painting two coats with approved quality & shade enamel paint on new iron work over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. allcomplete but excluding GST as per direction of Engineer-in-charge. 44 Painting two coats with approved quality & shade enamel wood paint on new wood work / old wood work over one coat of primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. 45 25mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints,finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage transportations, curing, etc. all complete but excluding GST as per direction of Engineer-in-charge 46 Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m cleaning the debrises with supply of all labour ,T&P ,staging ,scaffolding ,etc.completewith all taxes,including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. 47 Cleaning of chocked ferrule points ( excluding fittings )& replacing of G.I fittings if necessary as per site condition including earth work excavation and refilling withlabour, T&P checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc. all complete as per direction of Engineer-in-charge.(Excluding GST) 48 Supplying of following PH materials of good quality with ISI markwith all transportation loading & unloading at both ends with all taxes, tollage, royalty etc. Complete & deposited in the section store as per direction Engineer-in-charge.(Excluding GST) 49 Porcelain hand wash basin (parryware/Hindware/Hindustan)(16 x 22) 50 Porcelain standard pedestal for H.W basin (Hindware) 51 15mm dia C.P Pillarcock (Plaza/Amber) 52 32 mm CP waste 53 32 mm steel sink waste 54 32 mm CP waste (steel) 55 32 mm pvc waste pipe 56 15mmConnection pipe (PVC/CP) 57 Porcelain kitchen sink (24 x 18 X10 )(Hindware/Parryware/Johnson) 58 5mm thick bevelleged plate glass mirror24 x 18 size with masonite board and mirror screw. 59 50mm G.M.F.W.V 60 40mm. G.M.F.W.V 61 10 ltr capacity PVC low level cistern (Slimline) 62 Soap Holder 63 100mm dia shower 64 20mm dia 60cm long towel rail 65 C.P Glass self (600x125) with glass 66 150mm/100 mm dia C.I/CP. Grattings 67 20mm dia C.P stopcock(Amber/Plaza) 68 20mm dia C.P concealed stopcock(Amber/Plaza) 69 15mm dia C.P angle stopcock(Amber/Plaza) 70 15mm long body C.P. Bib cock(Plaza) 71 15mm CP.Bibcock (Plaza/Amber) 72 C.P Towel ring 73 White cement 74 M-seal 75 25 mm to 50mmGI tank nipple 76 Basin rack bolt 77 Commode (p/s-trap)EWC/AWC with cover 78 commode sheet cover and clamp (Parryware) 79 Supply of G.I Pipes (Medium Quality)/PVC pipes (Sch-80) of different dia.with ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST). 80 20mm UPVC Pipe(Supreme/Oriplast) 81 25mm UPVC Pipe(Supreme/Oriplast) 82 40mm UPVC Pipe(Supreme/Oriplast) 83 50mm UPVC Pipe(Supreme/Oriplast) 84 Supply of U-PVC fittings of different dia. of medium quality as per ISI mark & specification including transportation, all taxes, tollage, & disposing the materials in site office store with stacking including supplying of all labour, T&P etc complete as per direction of Engineer-in-charge(Excluding GST) 85 25mm Dia. U-PVC union 86 40mm Dia. U-PVC union 87 50mm Dia. U-PVC union 88 25mm Dia. U-PVC elbow 89 40mm Dia. U-PVC elbow 90 50mm Dia. U-PVC elbow 91 20mm Dia. U-PVC tee 92 25mm Dia. U-PVC tee 93 40mm Dia. U-PVC tee 94 50mm Dia. U-PVC tee 95 20mm Dia. U-PVC socket 96 25mm Dia. U-PVC socket 97 40mm Dia. U-PVC socket 98 50mm Dia. U-PVC socket 99 20mm Dia. U-PVC MTA( Brass Threaded) 100 25mm PVC Ball Valve 101 40mm PVC Ball Valve 102 50mm PVC Ball Valve 103 Health Faucet 104 2 in 1 CPBibcock 105 upvc clamp (15mm to 50mm) 106 20 to 25mm Tee Upvc 107 Endcap 25mm Upvc 108 U/C-PVC Paste 109 Thread tape 110 Labour charges for layingof PVC pipes and other PH materials laid on wall or under graund including dismantling , cutting holes in brick/ conc. Work supply of fitting & materials with socketand screw joints including cuttingthreads to pipe, pipes to length including eachworkexcavation of all types of soil,required scaffolding & refilling the trench afterthework andfixing of pipeline in wall with clamps of providing light barriers withsupply ofall labour ,T&P taxes etcall complete as per direction of Engineer in charge(Excluding GST) 111 Layingof 15mm to 25mm dia pipe 112 Laing of 40mm to 50mm dia pipe 113 Supplying the following HCI/PVC pipes and fittings of different dia with ISI mark(Supreme) including loading and unloading at both ends with all cost of materials,labours,T&P,,taxes,royalties etc .Allcomplete as per direction of engineering in charge. (Excluding GST) 114 110mmPVC Pipe 115 110mm PVC door bend 116 110mm PVC plain bend 117 110mm PVC P trap 118 110mm PVC S/J with door 119 110mm PVC D/J with door 120 110mm PVC offset 121 110mm PVC Cowl 122 110mm PVC Clamp 123 upvc clamp (15mm to 50mm) 124 Supplying fitting fixing of 8mm thick ceramic floor tiles plain/antiskid( premimum Quality 300 x300 mm or 400 x 400 mm size)in 1st floor, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge. 125 Supplying fitting fixing of Vitrified floor tiles like SOMANY,JHONSON,KAJARIA ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4(1cement: 4 sand) jointed with white cement including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.( New work) 126 Deployment of following machineries & laboursfor Dismantling ,Cutting, cleaning, spreading & levelling of the existing damaged AC sheet roof Rest rooms with all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.( No Idle Charges to be Paid) 127 Payloader 128 Hydraulic Excavator of 1cum bucket 129 Vibratory Roller 8-10 tonne 130 Un-Skilled Labour 131 PART B- Renovation of existing Shed (Sl. No.52 to 70).C.C. M20 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting with40 to 60 neddle vibrator, curing with cost and supply of all materials, labour, T&P, taxes,tollage, royalties,etc. all complete but Excluding GST as directed by Engineer-in-charge. 132 Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe 500 confirming to IS-1786 including cutting, straightening, bending,binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour,materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient). 133 Preparing the Structural Member surface with scrappingwith scrapper, wire brush, sand paper with cleaning the surface and spray painting the same with two coats of coaltar epoxy paint over a coat of inorganic zinc silicate primer of approved quality upto a height of 12m, etc. complete including all staging, scaffolding, labour, machineres, all equipments, safety of workmen, all taxes but excluding GST,materials, fuel, brushes, tools, port entry fees etc. complete as directed by the Engineer-in-charge. 134 Supplying the structural steel of TATA/ SAIL/ RINL or any approvedmake for vertical members/ horizontal memeber/ bracing or for any other usage as a structural member as specified by the Engineer in-charge,fabricating, welding at the locations or as directed and hoisting joists and fabricated structural members and placing in position with proper alignment to the existing net barrier structure upto a height of 12m as directed with engaging heavy machineries for lifitng, shifting of structural members or any other useincluding transportation, handling, cutting, welding the materials/ structural with hire & running charges of welding machine and its accessories, all labour, testing charges, materials, cutting/drilling holes, fuel, tools and other equipments, tackles, gate entry fees, taxes, tollage, staging/ scaffolding, safety of workmen wherever necessary, etc. excluding GST complete as directed by Engineer-in-charge.[N.B. : (i) Payment shall be made as per IS Code, (ii) No wastage shall be paid, (iii) Invoice of material procurement must be deposited] 135 Brick work in Fly Ash Bricks of size 25cmx 12cm x 8cm and having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour,T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding GST as per direction of Engineer-in-charge 136 12 MM thick Cement plaster with cement mortar (1:4) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P,staging, scaffolding, watering, curing, taxes,tollage, royalties, etc. complete but excludingGST as per direction of Engineer-in-charge 137 Dismantlingbrick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50mwith supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 138 Removing old cement plaster from walls including raking out joints 12mm deep including stacking the useful materials for reuse and removing the debris within 50mwith supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge. Excluding GST. 139 Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.Excluding GST. 140 Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking of the materials for reuse and removing the debris within 50m lead.i with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge.Excluding GST. 141 Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge.Excluding GST. 142 Supply of 32mm thick single/double leaf seasoned piasal wood with anti termite treated paneled Door shutters having both side styled moulded having bottom rail of 200 mm thick, top rail 100mm thick ,middle lock rail 200 mm thick alongwith straight vertical moulded style of 125mm width (total 2 panels) and panel should be 20 mm thick piasal plank embedded 16mm to styles & rails with one no of aluminum aldrop of size 300mm x 16mm x 40mm, two nos of 150 mm with 175mm x 40mm flat aluminum handles, 2 nos. of 200 mm x 10mm aluminum tower bolts and required numbers of wooden hinged cleats,fixing at position etc all complete . including cost of all materials,labour, loading & unloading Charges,all taxes,transportation charges,stacking at site store etc. all complete as directed by Engineer In Charge.(Excluding GST) N.B.- Size & design decided by the departmentas per requirement at site. 143 Supplying fitting, fixing fully glazed aluminum framed openable/Sliding windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.Excluding GST. 144 Providing, supplying, fitting, fixing of M.S. grills for windows of approved quality & design including fabrication charges, with supply of all labour, T&P, materials, taxes, etc. all complete as per direction of Engineer-in-charge. Excluding GST. 145 Exterior painting two coats to wall surface with acrylic based weather coat paint of approved quality & shade having resistance to Fungus,Fading, including scraping, cleaning, brushing, washing the old paint, as and when required, removing the flakes applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes,transportation, staging, scaffolding, etc. complete but excluding cost of GST as directed by the Engineer-in-charge. 146 Painting two coat with acrylic base plastic emulsion paint over one coat primer of approved quality shade including scraping, cleaning, washing the old paint with scraper filling the holes with plaster of paris preparing the surface by sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding,etc. complete but excluding GST as per direction of Engineer-in-charge. 147 Painting two coats with approved quality & shade enamel paint on new iron work over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. allcomplete but excluding GST as per direction of Engineer-in-charge. 148 Painting two coats with approved quality & shade enamel wood paint on new wood work / old wood work over one coat of primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding GST as per direction of Engineer-in-charge. 149 Supplying, fitting & fixing of precoated Galvolume metal sheet or its equivalent of 1000 mm width with total coated thickness of 0.5mm. for roof approved quality, drilling hole fixing of wind tie and ridges or valley including supply of all EPDM screw, ridge pieces, eve board, wind ties, cutting the sheet to proper profile with supply of all materials, labour, transportation, loading and unloading at both ends, T&P, etc. all complete as per the direction of Engineer-in-charge (Excluding cost of GST). 150 PART C-Electrification to the plot and shedPART-1(Supply Part) (Sl. No.71 to 88)Supply of 20 Mtr. height High Mast Lighting Tower with timer control panel as per Scope of Work. 151 Supply of 400 Watt LED WW asymmetrical flood light luminaries with accessories as per Scope of Work. 152 Supply of power tool and hand driven tool for raising and lowering operation. 153 Supply of 400 Amp. Outdoor type feeder pillar having outgoing 1 no. of 250 A , 2 nos of 125 A MCCB , double door outdoor type, as per scope of work. 154 Supply of 250 A wall mounted Distribution panel , having main incoming 250 A , outgoing 8 nos of 63A, 4P, MCCB , 4 nos of 63 A DP MCB , 6 nos of 32 A DP MCB ,as per scope of work. 155 Supply of 125 A wall mounted Distribution panel , having 125 A 4P main incoming MCCB , outgoing 6 nos of 32 A DP MCB , 6 nos of 20 A DP MCB 156 Supply of 3½ C x 185 sq. mm, 1.1 KV grade, G.I armoured, XLPE insulated stranded aluminum conductor cable. 157 Supply of 3½ C x 70 sq. mm, 1.1 KV grade, G.I armoured, XLPE insulated stranded aluminum conductor cable. 158 Supply of 3½ C x 25 sq. mm, 1.1 KV grade, G.I armoured, XLPE insulated stranded aluminum conductor cable. 159 Supply of 4 C x 10 sq. mm, 1.1 KV grade, G.I armoured, XLPE insulated stranded aluminum conductor cable. 160 Supply of 3 C x 6 sq. mm, 1.1 KV grade, G.I armoured, XLPE insulated stranded aluminum conductor cable. 161 Supply of 250 Watt LED High bay light for shed lightingas per Scope of Work. 162 Supply of 20 A industrial plug-cum- socket point with metallic enclosure. 163 Supply of 18/20 Watt LED batten tubelight fitting 164 Supply of 1400 mm ceiling fan 165 Supply of 300 mm exhaust fan 166 Supply of bulk head light fitting for terrace lighting 167 Supply of roof top 90 W LED street light fitting 168 PART -2 (Installation & Commissioning Part) (Sl. No.89 to 113).Design & erection of foundation for 20 mtr. High Mast Lighting Tower. 169 Installation, testing and commissioning of 20 mtrs. High Mast Lighting Tower. 170 Installation & commissioning of 400 Watt LED WW asymmetrical flood light luminaries 171 Installation & Commissioning of 400 Amp. outdoor type feeder pillar by prepairing brick foundation of suitable size along with supply of civil materials as required. 172 Installation & Commissioning of 250 Amp. Indoor type wall mounted distribution panel on the brick wallalong with supply of civil materials as required. 173 Installation of 125 A wall mounted Distribution box along with supply of civil materials as required. 174 Laying of 3½ C x 185 sq. mm, 1.1 KV grade, G.I armoured,XLPE insulated stranded aluminum conductor cable. 175 Laying of 3½ C x 70 sq. mm, 1.1 KV grade, G.I armoured, XLPEinsulated stranded aluminum conductor cable. 176 Laying of 3.5 C x 25 sq. mm, 1.1 KV grade, G.I armoured, XLPEinsulated stranded aluminum conductor cable. 177 Laying of 4 C x 10 sq. mm, 1.1 KV grade, G.I armoured, XLPEinsulated stranded aluminum conductor cable on the wall / M.S angle structure by providing 3MM X 25 MM aluminium clamp. 178 Laying of 3 C x 06 sq. mm, 1.1 KV grade, G.I armoured, XLPEinsulated stranded aluminum conductor cable on the wall / M.S angle structure by providing 3MM X 25 MM aluminium clamp. 179 Making of Kutcha cable trench of size 900 mm (depth) x 300 mm (width) in hard soil, laying of cable, dressing and leveling the excavated trench. 180 Using of HDD method for laying of LT cable (minimum 2500 mm. below the ground level). 181 Wiring to 20 W LED tube light points as per scope of work 182 Wiring to 250 W LED High baylight points as per scope of work 183 Wiring to Ceiling fan points as per scope of work 184 Wiring to calling bell point as per scope of the work 185 Wiring to 10A modular socket as per scope of the work 186 Wiring to 20 A modular socket as per scope of the work 187 Wiring to Exhaust Fan point as per sope of the work 188 Wiring to Bulk Head Fitting light point as per scope of the work 189 Fixing & wiring to 20A Industrial plug cum socket point 190 Wiring to roof top 90 watt LED street light fitting as per scope of the work 191 Wiring to Air Conditioner point as per scope of work. 192 Execution of special chemical earthing with supply of 50 mm dia, 10 ft. long heavy gauge GI pipe & other related earthing materials as per latest IE Rule.
|
