Bids Are Invited For Registration Of Prices For Future And Eventual Acquisition Of Electrical Materials For ... in Brazil

Work Detail

Led Luminaire With Maximum Nominal Power Of 60W Complete And Assembled Set For Ready Installation. (Complete Lighting Unit, That Is, A Light Source With Its Respective Control And Power Systems Together With The Parts That Distribute The Light, And Those That Position And Protect The Light Source. A Luminaire With Led Technology, Optical System For Distribution Light, Electronic System For Power Supply And Devices For Control And Ready Installation). (Supplied By Manufacturer Completely Assembled And Connected). With Minimum Characteristics Of Equal Or Superior Quality: Body Made Of Injected Aluminum Alloy Or Extrusion, At High Pressure; Closed Optical Set With Tempered Glass Or Polycarbonate Refractor; Encapsulation Of Ceramic Leds; Secondary Optical System In Polycarbonate Or Acrylic, Injected At High Pressure And Stabilized To Resist Ultraviolet Radiation And Weathering. Minimum Initial Lens Transparency Must Be 85%; Degree Of Protection Ip66 Or Higher For The Optical Block. Ip65 Or Higher For Driver. Ip44 Or Higher For Housing The Driver In The Luminaire; Set Heat Sinks, Circuits And Leds In Aluminum; Electrostatic Polyester Powder Painting, With Uv Protection, Resistant To Weather And Corrosion, With A Minimum Layer Of 60 Micrometers, In Gray Or Graphite; Auxiliary Equipment Housing (Driver, Connections, Surge Protector) With Access Via Screws Or Snap Fasteners; Mcpcb (Metal Clad Printed Circuit Board) Aluminum Led Circuit Board, Assembled Using Smd (Surface Mounting Devices) Process. Modules With Pcb Made Of Phenolite Or Fiberglass Material Will Not Be Accepted. Cob Led Technology (Chip On Board) Will Be Supported; Resistance To Mechanical Impacts (Ik Classification): Minimum Ik-08; Operating Temperature: Minimum Between Temperatures Of -5°C And +50°C; Integrated 7-Position Socket For Photocontroller Relay With 7 Contacts, 3 For Load And 4 For Dimming And Data; Nominal Supply Voltage: 110V To 277V (Alternating Current); Fact, Led Luminaire Maximum Rated Power Of 80W Complete Set And Assembled For Ready Installation. (Complete Lighting Unit, Electronic System For Power Supply And Control Devices And Ready For Installation). (Supplied By The Manufacturer Completely Assembled And Connected.) With Minimum Characteristics Of Equal Or Superior Quality: Body In Injected Aluminum Alloy Or High Pressure Extrusion; Closed Optical Set With Tempered Glass Refractor; Encapsulation Of Ceramic Leds; Secondary Optical System In Polycarbonate Or Acrylic, Injected At High Pressure And Stabilized To Withstand Ultraviolet Radiation And Weathering. Minimum Initial Lens Transparency Must Be 90%; Degree Of Protection Ip66 Or Higher For The Optical Block. Ip65 Or Higher For Driver. Ip44 Or Higher For Housing The Driver In The Luminaire; Assembly Heatsinks, Surge Protector) With Access Via Screws Or Snap Fasteners; Mcpcb (Metal Clad Printed Circuit Board) Aluminum Led Circuit Board, Assembled Using Smd (Surface Mounting Devices) Process. Modules With Pcb Made Of Phenolite Or Fiberglass Material Will Not Be Accepted. Cob Led Technology (Chip On Board) Will Be Supported; Resistance To Mechanical Impacts (Ik Classification): Minimum Ik-08; Operating Temperature: At Least Between Temperatures Of -5°C And +50°C; Integrated 7-Position Socket For Photocontroller Relay With 7 Contacts, 3 Of Which Are For Ac

Contact Information