Request For Quotation Purchase Of Electrical Goods in Kazakhstan

Work Detail

Heater Pet-4 1.6 Kw 220V, Electric Convector For Heating Premises. It Consists Of A Heating Part (Stich), Enclosed In The Lower Part Of The Case With Slot-Shaped Holes From The Bottom And Blinds In The Upper Part. This Design Allows Air To Pass Freely Inside The Convector,, Ceramic Heater 430Cr Gas Device Type: Propane - Butane Productivity: - Fuel Consumption: 0.118-0.305 Kg/Hour Weight (Kg.): 11.5 Availability Of Waiting Engine Emergency Stop: Yes Fuel Tank Volume (L.): 0 Thermal Power 4.2 Kw Gas Is Fed Into The Furnace, And Then Ignited By A Piezoelectric Element. The Power Of The Furnace Can Always Be Adjusted According To The Owners Wishes. The Flame In The Furnace Burns Constantly, Thanks To Which The House Or Office Is Heated. This Unit Model Is Manufactured In The United States Of America. Its Thermal Power Is 4.2 Kilowatts. The Type Of Heater Is Propane-Butane. Over Time, The Stove Consumes Only 0.118 To 0.305 Kilograms Of Fuel. The Ceramic Stove Weighs Quite A Bit - 11.5 Kilograms. Condition: New, Warranty Not Less Than 1 Year, Power, Kw 3 Air Supply, M3/H 3000 Voltage, V 220 Weight, Kg 5.1 The Tep-3000K Heat Gun Differs From The Tep-3000 In Its Rounded Cylindrical Body, Better Suited For Creating A Directed Air Flow. The Device Itself Serves To Heat Rooms In The Cold Season, As Well As To Create Comfortable Conditions In The Heat. The Characteristics Make It Possible To Provide Heating For Rooms With A Total Area Of ​​20–25 Square Meters. The Body Is Made Of Durable Metal And Has A Slightly Elongated Cylindrical Shape. An Electric Cable For Connecting To A Single-Phase Electrical Network Comes From The Back Of The Model. An Efficient Blade Fan Is Located Inside The Case, Which Creates A Directed Air Flow With A Volume Of 300 Cubic Meters. M/Hour Between The Fan And The Outlet Grid Is A Heating Element With A Power Of 3000 W. The Design Of The Heating Element Provides For Twisting It Against The Support Of A Round Shape. This Contributes To The Creation Of A Directed Flow Of Air. A Protective Grille Is Placed At The Outlet Of Warm Air For Greater User Safety. Above The Grille, On The Upper Part Of The Housing Cylinder, There Is A Small Elevation For Placing The Operating Mode Switch And The Thermostat. The Operating Mode Switch Has Three Positions. Among Them Are: Off, Ventilation Without Heating (Used For Blowing Cold Air) And Heating At Full Power. In Case Of Overheating, A Special Controller Automatically Turns Off The Heater. Warranty Of At Least 1 Year

Contact Information