|
Heating Works – Heat Supply Systems - Expansion Of The Steinlach-Wiesaz School Center In Dußlingen. It Is The New Building Of The Community School With Teaching And Specialist Classrooms. The Building Has A Partial Basement And Is Two Storeys. /// Area Information: Size Of Construction Area: 9,280.00 Sqm - Gfa: Level 0 (Ground Floor) 1,513.43 Sqm - Gfa Total: 3,243.10 Sqm - Bri Total: 14,555.95 Cbm /// Construction: The Building Is A Reinforced Concrete Structure Designed With Flat Ceilings, Reinforced Concrete Columns And Wall Panels. The Building Is Stiffened By The Reinforced Concrete Wall And Ceiling Panels. The Floor Ceilings Are Optimized In Terms Of Component Height According To Their Spans. The Columns In Levels 0 + 1 Are Designed As Composite Columns. Wall Components In Contact With The Ground Are Implemented As Waterproof Construction. The Four-Sided Arcade On Level 1 Is Attached As A Steel Structure To The Reinforced Concrete Shell Facade. The New Building Is Founded As A Shallow Foundation On A Gravel Base Layer. Edge Beams Reinforce The Highly Stressed Floor Slab Edges And Also Serve As Frost Aprons. Vertical Wooden Planks At A Grid Spacing Of Approx. 1.20M With Rear-Ventilated Vertical Wooden Cladding On A Wooden Frame Construction As A Thermal Shell, As Well As Window Strips Made Of Wood And Aluminum With Parapets Form The Outer Facade. /// Information On Heat Supply: The Planned New Building Will Be Supplied With Heat Via A Secondary Connection To A Local Heat Transfer Station. The Distribution Takes Place From The Technical Center In The Basement Via A Thermally Separated Distributor To The Respective Supply Areas In The Heating Sub-Distributors Or In The Intended Surface Heating Systems. /// The Following Services Are Offered: System Protection For The Local Heat Transfer Interface, Including Pressure Maintenance/Degassing, Make-Up Device Including Membrane Expansion Vessels, Softening Valve, Protection For The Wt 140 Kw Heat Generator And Other Components /// Heating Distributor Thermally Separately Insulated For 6 Heating Groups Including Pumps, Fittings, Heat Meters And Thermal Insulation /// Various Fittings And Components: Including 7 Pumps, 34 Butterfly Valves Up To Dn 65, 6 Check Valves Up To Dn 65, 6 Dirt Traps Up To Dn 65, 22 Ball Valves Up To Dn 29, 16 Dial Thermometers, 12 Pressure Gauges, 10 Air Pots, 4 Heat Meters, As Well As Several Branch Valves, Installation Of Msr Valves /// Pipelines, Black Steel Pipe, Welded Up To Dn 65, Approx. 705 M + Fittings And Thermal Insulation /// Approx. 89 Fire Barriers For Supply Lines, Black Steel Pipe /// Various Labels, Emptying And Filling, Leak Testing , Valves /// Underfloor Heating With Approx. 13,000 M System Pipe For Surface Heating, Approx. 2,348 M2 System Composite Roll, Edge Insulation Strips And Insulation Board, Approx. 45,000 Stapler Clips, Approx. 210 Compression Fittings, Pipe Guide Bends, Protective Sleeves + Other Components /// 9 Heating Circuit Distributors And Distribution Cabinets Up To 16 Heating Circuits /// 2 Plate Heat Exchangers Up To 37 Kw For Underfloor Heating Including Protection /// Mobile Heating Center For Screed Heating Up To 21 Kw,
|
