Tenders Are Invited For Construction Of A Safety-Free Rope Park Walk Under The Clouds At Ul. Stawowa In Jelc ... in Poland

Work Detail

1. The Subject Of The Order Is The Construction Of An Insurance-Free Rope Park Walk Under The Clouds At Ul. Stawowa In Jelcz-Laskowice. 2. Scope Of Works: 1) Delivery Of 6 Sets Of Rope Park Equipment And Mounting Them On Trees, At A Low Height. The Designed Sets Consist Of The Following Devices: 1) Set 1: A) Tires, B) Sensitive Log, C) Zigzag. 2) Set 2: A) Arch Bridge, B) Suspension Islands, C) Johnny Bridge, D) Net Ladder.3) Set 3: A) Climbing Net.4) Set 4: A) Platforms With Roof, B) Crawler, C) Lions Hoops, D) Hamster.5) Set 5: A) Net Bridge, B) Wooden Platform.6) Set 6: A) Rope Bridge Made Of Climbing Net, B) Johnnys Bridge, C) Safety Net Tunnel, D) Wooden Stable Bridge. • The Above-Mentioned Rope Park Devices Should Be Hung Between Trees And Platforms On Structures Made Of Reinforced Ropes. The Devices Should Be Made Of Pressure-Impregnated Wood And Steel Ropes Covered With A Sheath Of Polyester Fibers That Are Highly Resistant To Abrasion And Uv Rays.• Wooden Elements, Except For The Descents From The Wooden Stakes, Should Be Made Of Larch Wood.• The Devices Must Be Installed While Maintaining Appropriate Safety Zones. , In Accordance With The Principles Contained In The Pn-En 15567-1+A1:2020-07 Standard. • Rope Connections And Ends Of Steel Ropes Must Comply With The Applicable Pn-En 13411-5+A1:2009 Standard. • Detailed Characteristics Of Each Rope Park Device, Platforms, Landings, Guy Ropes And Intermediate Poles Can Be Found In The Technical Description For The Construction Design . 2) Certification Of Rope Park Devices By A Type A Inspection Unit. All Rope Park Devices Require Certification After Completion Of Construction Works By An Entity Classified In Accordance With The Pn-En Iso/Iec 17020:2012 Standard As A Type A Inspection Unit, I.E. A Completely Independent Organization From All Interested Parties - Not Being Part Of The Design Process, Production And Equipment Services. Ordering The Certification Of Rope Park Equipment And Obtaining Certificates Confirming That The Installed Devices Meet The Pn-En Standards Specifying The Requirements For Rope Park Equipment Is The Responsibility Of The Contractor. The Contractor Will Provide The Certificates To The Ordering Party During The Acceptance Of The Works. 3) Making A Surface From Wood Chips. Location Of The Path System In Accordance With The Land Development Design. Detailed Characteristics Of The Wood Chip Surface Can Be Found In The Technical Description For The Construction Design. 4) Delivery And Installation Of The Following Small Architecture Devices: A) Regulations For The Use Of The Facility - 1 Piece, B) Waste Bin O Capacity Of 40 Liters - 1 Piece, C) 5-Station Bicycle Stand - 1 Piece. Detailed Characteristics Of The Above-Mentioned Devices Can Be Found In The Technical Description Of The Construction Design. The Structure Of The Devices Is Steel, Galvanized And Painted In Ral 6005. 5) Cutting Out A Fragment Of The Fence Span, Delivery And Installation Of The Entrance Gate.

Contact Information