|
Low Back Swivel Chair – Specifications: Desk Swivel Chair, Low Back, With Arms; Seat Made Of Injected Polyurethane Foam With A Minimum Density Of 45 Kg/M³ And A Minimum Thickness Of 38 Mm, Cfc-Free. Protection Cover And Injected Finish Under The Seat In Polypropylene; Backrest Structure In Plywood Or Injected Polypropylene, With Back Support Injected High-Resistance Polypropylene Cover To Finish The Backrest; Cushion Made Of Injected Polyurethane Foam With A Minimum Density Of 24 Kg/M3, A Minimum Thickness Of 5Cm And An Adequate Curvature That Allows The User To Comfortably Support The Lumbar Region; Structure: Base With 5 Rods Injected In Nylon, With Double Swivel Caster; Height Adjustment Column Using Gas Power; The Seat And Backrest Tilt Adjustment Mechanism Must Be Synchronized With The Assembly Locking With At Least 5 Different Positions; Backrest Height Adjustment Mechanism With At Least 5 Positions, Activated By A Button Or Easy-To-Operate Mechanism Located On The Backrest Itself. Minimum Dimensions: Seat: Minimum Seat Depth 440Mm Minimum Seat Width 460Mm; Backrest: Total Height From The Backrest To The Floor Minimum Of 850Mm; Minimum Width 410Mm; Minimum Backrest Height: 400Mm Armrests: “T” Shaped With Height Adjustment With At Least 5 Positions Via Button On The Armrest; Armrest, Internal Steel Core Covered In High-Resistance Polypropylene, The Arm Structure Must Be Equipped With A Means Of Adjustment In The Lateral Clearance On Both Sides; It Must Have Depth Adjustment (Horizontal) With At Least 3 Positions. Metallic Components: Must Receive Anti-Rust Treatment And, When Visible, Black Epoxy-Powder Electrostatic Painting. Finish: All Components Must Be Free Of Burrs Or Sharp Corners, In Addition To Presenting Surfaces With A Homogeneous Finish, Without Sharp, Sharp, Rough, Slag And/Or Other Types Of Q Volumes, President Swivel Chair On Casters And Gas Piston - Black President Model, Swivel Chair Type, Maximum Supported Weight 110 Kg, Arm Support Yes, Height Adjustment Yes, Casters Yes, Backrest Tilt No, Structure Material Steel, Wood, Upholstery Yes J Serrano Fabric Coating Finish, Injected Fairing E Molded Mounting System Screws And Nut, Closed Piston Height: 1.08 Cm | Open Piston: 1.19 Cm Width 51.5 Cm Depth 45.5 Cm, Weight 15.73 Kg, Warranty 01 Year., Single Box Bedding Set With Mattress – Specifications: Mattress: Pocket Springs, Soft Suitable For People Up To 120 Kilos; Pillow Top; Mattress Composed Of The Following Layers: Jacquard Fabric Embroidered With Foam Blanket; Polyurethane Foam Blanket D-28 Or Higher; Compressed Felt Blanket; Needle Felt Blanket; Stabilizing System In The Corners And Sides Of The Mattress; Dimensions: 188Cm X 88Cm (Length X Width); Height: 28 To 30 Cm; Fabric Protected Against Stains And Dust Mites; Packed In Plastic Bag Upon Delivery. Box Bed: Height That Varies Between 30 To 32Cm With Feet; Embroidered Jacquard Fabric Lining With Foam Blanket; Structure In Selected Reinforced And Treated Wood; Dimensions: 188Cm X 88Cm (Length X Width); Upon Delivery, The Ends Of The Bed Must Be Protected By Cardboard Or Other Material. Modular Wardrobe In Mdp - Specifications: Composed Of Sides, Bottom, Base, 03 Shelves, Po
|
