|
Bids Are Invited For Overall size L4880xD770xH900 mm , made up of C-frame understructure. All sheet metal items shall be of CRCA as per IS 513:1994. C-frame made of rectangular pipe with cross section of 60mm x 30mm & 1.6 mm thick with feet tolerance of - 5mm to +20mm & skirting at bottom side. Horizontal members to connect C frame shall be made of rectangular pipes of CRCA MS 1.6 mm thick of pipe dimension 60 x 30 x 1.6 mm. Side cover panels, back panels should be made from CRCA MS panels of 0.8 mm thick. Fixed-Type CRCA electric Trunking having electrical switches 16A/6A & sockets 16A/6A with 8 six module plates. Welded understorage cabinet with intersection of vertical and horizontal members having provision to be relocated anywhere easily as an independent unit. Doors should be assembled with hinge assembly. Intermediate horizontal channels should be provided between door and drawer. Shelf should be bend panel with 20mm height. single piece drawer tray supported on LH and RH ball slide to be provided. Knee space panel shall be in 22 gauge construction. Understorages of Size 600mm W x 530mm D x 674mm H should be supplied. ,1 Drawer & 2 Shutters and , . Thickness of storage unit LH/RH Panels, shutter front, bottom panel, Top front, drawer separator, alignement channel, Back panel, Shutter cover, Fr. Rack strip, top cover should be of 0.8mm thick. Handle polypropylene Recessed-Type. Lock facility with 180° and 10 lever cam lock mechanism . Shutter should be of Double-type construction. Ball Slide: 450mm Length (required only for drawer unit). Shutter should have provision of roller catch. Worktop should be 18mm (+/- 2mm) thick Black Granite worktop with exposed edges chamfered.. All steel frame-work is should be pre-treated with superior epoxy powder coated finish.The participating brand must have all the prevalent quality & safety related certifications like ISO:9001, ISO:50001, ISO:14001, ISO: 45001 , BIFMA, AIOTA, Product should should be certified Green Guard by UL, 1 shutters for sink storage Polyproplane (PP) Sink of size 555x350mm & depth 200mm with 3 way Faucet and Eyewasher., Overall size 600(W) x450 (D) x650 (H) is made of CRCA Sheet with thickness of 0.8 mm thick. MP lock is Provided for Locking of Door. 0 Crank Hinges are provide for Doors. For Hanging 10 mm Fastners are Provide for Wall mounting, Supplying & Placing Modular table in completely knock down conditions with an overall size 1800mm X 1700mm X 750mm that is to be assembled at site. The worktop shall have the combination of 18mm thick PLPB and 25mm thick MDF board. The top shall have the size 1800mm X 800mm made up of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The base top shall have the size 1800mm X 800mm made up of 25mm thick Medium density fibre-board with deco painted. The table top profile shall be in roundable shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The base top MDF board shall be half round post form edges with groove. The table shall be clad with modesty panel which provide structural support for the table. It should be 1mm thick CRCA powder coated star perforated sheet connected with both end. The table shall be supported on board base leg and 100mm peg. The leg shall have the cross-section area 100mm X 100mm. There shall be buffers provided to avoid scratches on the floor. The table shall have side unit for storage purpose with an overall size 900mm X 450mm X 530mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with drawer base 9mm thick, top 25mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. It shall have sliding door shutter operated with the assistance of SS handle and sliding rail track and locking mechanism. It shall be mounted over 75mm Peg. A fixed pedestal shall be provided with an overall size 400mm X 600mm X 530mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick, top 25mm thick and drawer base 9mm thick. The pedestal shall have 3 nos. of drawer having same size. The drawer shall be operated with SS handle and easily close & open with the assistance of sliding channels to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 75mm Peg. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. , Providing and Placing MID Back Chair with overall size of 770 mm W x 770 mm D x 1135 – 1225 mm H x 499 – 598 mm Seat Height. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ and 25mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. Seat Size is 520 W mm x 480 D mm. The back is cushioned made of PU foam, upholstered with leatherette. The back size is 477 W mm x 800 H mm. The armrest top is molded from polyurethane and mounted on to a drop lift fixed type tubular armrest support made of Ø25±0.03mm x 1.6±0.01mm thick M.S. ERW tube having chrome plated finish. The Synchro Knee Tilt mechanism is designed with following features : 360° revolving type. The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 60±0.5mm. The pneumatic height adjustment has an adjustment stroke of 100±0.3mm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 650±0.5mm pitch centre dia. (750±1.0mm with castors). 5 nos. of twin wheel castors are injection moulded in plastic having 60±0.1mm wheel diameter and assembled to pedestal, Supplying and placing single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS leg with shiny chrome finish having Dia. 38mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 540±10 mm(D) X 490±10 mm(W), seat height = 430±10 mm, overall width = 865±10 mm, overall depth = 755±10 mm & overall height = 750±10 mm. , Supplying and placing two seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 202 grade leg having Dia. 38mm. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 540±10 mm(D) X 1050±10 mm(W), seat height = 430±10 mm, overall width = 1450±10 mm, overall depth = 755±10 mm & overall height = 750±10 mm., Supplying & placing center table with an overall size 1200mm X 600mm X 450mm. The top shall be made up of 18mm thick Pre-laminated particle board of grade II of IS 12823. The profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish having cross-section area 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor Providing and supplying student/training room chair with ergonomic design for user comfort. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The same shall be upholstered with fabric tapestry 0.6mm thick and 235 GSM and PVC liping also provide with seat and back. The seat and back shall be arrested together with MS powder coated HR steel spine. The armrest shall be used black integral polyurethane arm completely joint with metal frame. The chair shall be supplied with folding writing pad made of 18mm thick particle board with 0.8mm edge lipping. Book-try shall be provided under the seat made of powder coated round wires. The frame structure shall be cantilever support type made up of MS/CRCA powder coated with 50-60µ (DFT) thick round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 460±10mm (D) X 475±10mm (W) and back size shall be 450±10mm (W) X 410±10mm (H) from seat. Overall height shall be 820-10 mm, overall depth 665±10 mm & overall width=540:10 mm. Providing and supplying cafe chair. The complete structure shall be made up of one piece injection moulded polypropylene shell. The seat, back and armrest shall be supplied aesthetically appealing perforated position and the understructure shall consist of four legs. There shall be plastic show provided at the bottom to avoid scratches on the floor. The seat size shall be 350±10 mm(W) X 450±10 mm(D) and back size shall be 300±10 mm(W) X 300±10 mm(H) from seat & overall height 745±10 mm, overall depth 550±10 mm, overall width 565±10 mm Supplying and placing Bar Stool. The seat shall be made of 15mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam 30mm thick having density 32kg/m³ with beage leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of metal insert pipe upholstered with high resiliance polyurethane foam 25mm thick having density 32kg/m³ with beage leatherite tapestry 0.8mm thick and 535 GSM. The seat and back shall be fixed with metal pipe. The chair shall have 3600 revolving mechanism. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 240mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. Footrest shall be provided of MS chrome plated round pipe of Dia 16mm. The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia 650 mm fitted with 5 nos. 50mm gliders which shall be 875±10 mm. shall be made of injection moulded black nylon 30% glass filled. The seat shall be 440+10 mm (D) X 455±10 mm (W) and back size shall be 535±10 mm (W) X 260±10 mm (Ht) from seat. Overall height Total Quantity : 170
|
