|
Construction Shed For Storage And Tooling Type -I Internal Area 14, 52 M 2 Made Of Resin Plywood Sheet, Including Furniture (Small Work, Effective Up To 30 Men) Der-Mg Standard, Manual Cleaning Of Vegetation On The Ground With An Af Hoe -05/2018, Supply And Placement Of Galvanized Sheet Work Sign 26 Esp. 0.45 Mm Size (6X3)M, Plotted With Vinyl Adhesive, Affixed With 4.8X 40Mm Rivets, On Metalon Structure20 Demobilization Of Work In An Urban Center Or Bordering Region With A Value Between 1,000,000.01 And 3,000,000.00, Manual Excavation Of A Trench With A Depth Of Less Than Or Equal To 1.30M Af 02/2021, 07/17/2024, Mechanized Backfill Trench With Backhoe Loader Retro Bucket Capacity; 0.26 M³/Power; 88Hp).Width From 0.8 To 1.5 M Depth Up To 1.5 M With Soil (Without Replacement) Of 1St Category With Vibratory Plate Af - 08/2023, Slim Concrete Ballast Applied In Crowning Blocks Or Af Footings -08/2017, Manufacture Assembly And Disassembly Of Formwork For Shoe In Sawn Wood And 25Mm, 4 Uses Af-06/2017, Block Frame, Baldrame Beam Or Shoe Or Shoe Using 8 Mm Ca-50 Steel - Assembly.Af _06/2017, Baldrame Beam Or Footing Using 10Mm Ca-50 Steel - Assembly. Mechanical Preparation With 400L Concrete Mixer. Af_05/2021, Launch With Use Of Buckets, Densification And Finishing Of Concrete In Structures Af _02/2022, Mechanized Excavation For Baldrame Beam With Mini Excavator Including Excavation For Placing Forms. Af _06/2017, Execution And Compaction Of Embankment With Predominantly Clayey Soil Exclusive Soil, Excavation, Loading And Transport Af_11/2019, Manufacture Assembly And Disassembly Of Formwork For Baldrame Beam In Sawn Wood, E25mm, 4 Uses Af_06/2017, Baldrame Beam E Footing Using 5Mm Ca-60 Steel - Assembly Af_06/2017, Baldrame Beam Or Footing Using 6.3Mm Ca-50 Steel Assembly Af_06/2017, Waterproofing Planter Or Baldrame Beam With Cement Mortar And Sand, With Additive Waterproofing E2 Cm Af_06/2018, Lean Concrete For Ballast, Mix 1.4.5;4.5 (In Dry Mass Of Cement/Medium Sand/Gravel 1) Mechanical Preparation With 400L Concrete Mixer. Af_05/2021, Manufacture Of Formwork For Pillars And Similar Structures In E17 Mm Resin Plywood Sheet 2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca -60 Steel Assembly Af _06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca -50 Steel Assembly Af _06/2022, Concreting Of Pillars, Fck25 Mpa Using Buckets Launching, Densification And Finishing Af_02/2022, Manufacture Of Formwork For Stairs With 1 Flight And Flat Slab In E17 Mm Resin Plywood Sheet Af _11/2020, Assembly And Dismantling Formwork For Stairs With 1 Flight And Flat Slab, Made Of Resin Plywood Sheet 2 Uses Af_ 11/2020, Stair Frame Of A Conventional Reinforced Concrete Structure Using 10.0Mm Ca -50 Steel Assembly Af_ 11/2020, Concreting Stairs Fck 25 Mpa With Use Of Pump Launching, Densification And Finishing Af_ 02/2022 Ps, Armaçao De Laje De Es
|
