|
Motorcycle Boot. - High Performance Ergonomic Long Tube Developed For Land Operations, With Walking And Motorized Movement, Made Of: Water-Repellent Leather, Flame-Resistant, With A Thickness Of 2.0 To 2.2Mm, Pantone Color 19-4004 Tpx, Water-Repellent Vacum Napa And Flame Resistant With A Thickness Of 0.9 To 1.1 Mm, Thermoplastic Toe Cap, Tpu Heel Counter, Internal Microfiber Heel Protection, Polyamide Fabric Lining With Rapid Perspiration Dispersion; Tpu Upper Protector With Three-Dimensional Designs, Ankle Protection Device In Sbr With Three-Dimensional Geometry, Tibial Protection Device In With Three-Dimensional Geometry. Safety Reflective In Delta Format And Reflective Tape; Upper Tabs In Tpu For Calf Adjustment In Black, Solid Tabs, Integral To The Articulation System On The Back With The Zipper; High Performance Zipper With Lock; Internal Rear Shoehorn With Tpu Handle. Non-Metallic Anti-Piercing Insole, Pu Insole, Antibacterial And Antifungal. Multifunctional Sbr-Eva-Tpu Sole. Packaging, Must Be Packed Individually In A Cardboard Box. Composition Label Must Present, Obligatorily, Information To The Consumer: Name, Company Name Or Registered Trademark And Cnpj, Country Of Origin, Name Of The Fibers Or Filaments, Treatment And Care For Conservation, Indication Of Size Or Dimension. Indications Must Be Made In A Clear, Permanent And Indelible Manner. Information On Treatment And Care For Conservation Are Mandatory And Must Be In Accordance With The Regulatory Standard On Labeling Approved By Resolution No. 02/2008 Of Conmetro., Orange And White Zebra Tape With 185Mts - Tape For Use In Road Signage Safety, In Orange And White Colors, Made Of Polyethylene, Packed In Rolls 200 Meters Long And 70 Mm Wide., Half-Face Respirator - Must Be Approved To Protect The Respiratory Tract Against Inhalation Of Solid Particles, Enabling Use With Filters Mechanical Or Combined And Against Gases And Vapors, Enabling The Use Of Chemical Filters. It Has A Semi-Facial Piece, With A Body That Combines Support In Rigid Plastic Material In Its Central Part And The Rest Of The Facial Piece In Synthetic Elastomer. On The Sides Of The Body Of The Parts, There Are Two Plastic Devices, One On Each Side, Equipped, In Their Front Part, With A Bayonet-Type Fitting And A Rubber Ring, Where The Chemical, Combined And Particle Filters Are Fixed. With Bayonet Fitting Or Fixing Base For Using Flat Particle Filters. An Inhalation Valve Is Attached To The Back Of Each Device. The Respirator Must Have, In Its Central Part, An Exhalation Valve. The Respirator May Or May Not Be Equipped With A Support Made Of Rigid Plastic Material, Fixed To The Front Of Its Body Through Two Buttons And The Exhalation Valve Casing, Using A Pressure-Type Fitting. This Support, Which Also Acts As A Cover (Cover) For The Exhalation Valve, Has Four Openings On Its Sides, Two Upper And Two Lower, Through Which The Ends Of Two Adjustable Elastic Straps Pass, Which Slide Freely Inside. The Facepiece May Or May Not Have A System Of Rods With Floating Tips, Equipped, In The Central Part, With A Fitting That Acts As A Cover For The Exhalation Valve, Fixed
|
