Tenders Are Invited For Oil Country Tubular Goods – Euh2 - Procurement Of Production, Connecting And Thick-W ... in Hungary

Work Detail

Oil Country Tubular Goods – Euh2 - Procurement Of Production, Connecting And Thick-Walled Pipes. Delivery Contract For The Magyar Földgáztáróló Zrt. For The Purchase Of Production Pipe, Extension Pipe And Thick-Walled Pipe For The Well Work To Be Carried Out On The Ch Well During The Euh2stars Project Within The Framework Of The Euh2stars Project, The Injection Of Hydrogen Produced And Stored By The Existing Hydrogen Technology Into The Komlós B-2 Plant Will Be Carried Out In The Psz- Through 36 Gas Wells. The Purpose Of The Project Is For The Bidder To Gain Practical Experience Of The Underground Storage And Production Process Of Hydrogen, The Operation Of The Well Structure And Surface Technology Through The Injection Of 2 X 100,000 Nm3 Of Pure Hydrogen Over Two Storage Cycles, And Then The Withdrawal Of 500,000 Nm3 Of Natural Gas-Hydrogen Gas Mixture Per Cycle. During The Implementation Of The Project, The Well Structure Of The Psz-36 Gas Well Will Be Transformed, Because Based On The Tests Carried Out In Advance, This Well Is The Most Suitable For Carrying Out The Operation In Terms Of Geology, Structure And Well Integrity In The Storage With A Capacity Of 30 Mm3. The Current Well Structure Will Be Partially Preserved, As The Sand Filter Will Not Be Replaced, As Operational Experience Does Not Justify This (There Was No Sand Production). Design Parameters • Pressure Range 85-120 Barg • Design Temperature: 0...+88 °C • Gas Volumes Storage Capacity (100 Mol% Hydrogen) 200-800 Nm3/H Storage Capacity (Expected 20 Mol% Hydrogen + 80 Mol% Natural Gas) 400 -1000 Nm3/H • Production Of Stratified Water 30-1000 Liters/Hour Annex 1 Of This Technical Content Is The Analysis Of The Composition Of The Gas Extracted From The Well, Annex 2 Is The Laboratory Analysis Of The Produced Water. The Fittings To Be Installed Must Comply With All The Operating Conditions Specified Above, And Safe Operation Must Be Maintained. The Technical Specification Of The Well Construction Materials Is As Follows: Technical Content: 1. Production Pipe Size: 3 1/2” Weight: 9.3 # Material Grade: J-55 Thread Type: 3 1/2” Tps Multiseal Ts-8 Nut (Or Equivalent Compatible) - 3 1/2 Tps Multiseal Ts-8 Male (Equivalent Or Compatible) Required Quantity: 1150 M With The Following Requirements: -Gas Tight Production Pipe With A Minimum Template Size Of 72 Mm -Integral Thread Connection -Pipe Length Range: 2 -A The Outside Of The Pipe Is Provided With Corrosion Protection And The Inside Is Black -Standard Thread Protectors (Api Spec. 5Ct, Latest Edition) -Useable Thread Grease According To Api Rp 5A3, Latest Edition -The Threads Of The Pipe Ends Are Provided With Corrosion Protection -The 2Nd Production Pipe Connector According To Sr2 Has A Non-Destructive Test Pipes Size: 3 1/2” Weight: 9.3 # Material Grade: J-55 Thread Type: 3 1/2” Tps Multiseal Ts-8 Nut (Equivalent Or Compatible) - 3 1/2” Tps Multiseal Ts-8 Male (Equivalent Or Compatible) Extension Lengths Required: 1,2,3,5,7,9 2 Of Each Extension Are Required. With The Following Requirements: - Gas Solid Production Pipe, With A Minimum Template Size Of 72 Mm - Integral Thread Connection - The Outside Of The Pipe Is Corrosion Protected And The Inside Is Black - Standard Thread Protectors (Api Spec. 5Ct, Latest Edition) - Use

Contact Information