Bids Are Invited For Acquisition Of Permanent Goods Consumption Materials And Educational Toys With Aim To M ... in Brazil

Work Detail

Steel Cabinet 02 Doors/4 Shelves - Description: Tall Steel Cabinet, Divided Vertically Into Two Compartments By Means Of Dividers With Independent Doors, Equipped With Four Removable And Adjustable Shelves In Each Compartment; Location: Administration, Secretariat And Management; Dimensions And Tolerances: Width: 900 Mm +/- 10 Mm; Depth: 400 Mm +/- 10 Mm; Height: 1980 Mm +/- 10 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers; Characteristics: Body, Partitions And Doors In Cold-Rolled Steel Sheet - Sheet 22 (0.75 Mm); Shelves And Door Reinforcement In Cold-Rolled Steel Sheet - Sheet 20 (0.90 Mm); Base In Cold Rolled Steel Sheet; Plate 18 (1.25 Mm); Door Locking Bars Ø = 1/4” (Minimum); Internal Hinges Not Visible On The Exterior Of The Furniture Made Of Cold-Rolled Steel Sheet; Plate 14 (1.9 Mm) With A Minimum Height Of 75 Mm; Three Units Per Door; Fully Metal Handle And Canopy, With Cremona System Locking, Base Cabinet - 2 Doors Description: Base Cabinet With Two Doors, Equipped With Two Shelves In Mdp Or Mdf, Covered With Low Pressure Melamine Laminate, Gray Color With Yellow Edges And Components , Orange, Blue Or Green; Location: Nurseries Ii, Iii And Preschools, Dimensions And Tolerances; The Cabinet - Width: 810 Mm; Depth: 500 Mm; Height: 740 Mm; Tolerance: Up To + 2 Mm For Width And Depth, +/- 1 Mm For Thickness And +/- 10 Mm For Height; Doors: Width: 400 Mm; Depth: 630 Mm; Thickness: 18 Mm; Shelves: Width: 768 Mm; Depth: 455 Mm; Thickness: 18 Mm; Characteristics: Top, Lower Piece, Left And Right Side Pieces And Back Piece In Mdp Or Mdf, With A Thickness Of 18Mm, Covered On Both Sides With Low Pressure Melamine Laminate, Textured Finish, In Gray Color.; Two Doors In Mdp Or Mdf, In Gray Color. Padlock.; Location: Employee Cup; Dimensions And Tolerances: Width: 1230 Mm +/- 30 Mm; Depth: 400 Mm +/- 30 Mm; Height: 1980 Mm +/- 30 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers; Characteristics: Body, Dividers And Doors In 22 Sheet Metal (0.75Mm); Flooring Of Compartments In 20 Sheets (0.90Mm); Metal Feet 16 (1.50Mm); Internal Sheet Metal Hinges Not Visible On The Outside Of The Furniture, At Least 75Mm High 14 (1.9Mm), Two Units Per Door. Printed Or Overlaid Label Holder, The Latter Being Exclusively Made Of Chrome-Plated Non-Ferrous Metal Alloy. Painting In Epoxy/Polyester Hybrid Powder Paint, Glossy Electrostatic, Polymerized In An Oven, Minimum Thickness Of 40 Micrometers In Gray Color., Steel File Cabinet - Description: Sliding Steel File Cabinet With Four Drawers Mounted On Telescopic Rails That Allow Full Opening; Location: Administration, Secretariat And Management; Dimensions And Tolerances: Height: 1330 Mm +/- 10 Mm; Width: 470 Mm +/- 10 Mm; Depth: 710 Mm +/- 10 Mm; Tolerances For Paint Layer: Minimum 40 Micrometers / Maximum 100 Micrometers; Features: Body And Internal Structure In 22 Sheet Steel (Thickness 0.75Mm) In Gray Color; 24 Sheet Metal Drawers (0.60Mm); Telescopic Rails And Zinc Plated Guides In Plate 18 (1, 20Mm) Or Higher; Rod

Contact Information