|
School Chair - Minimum Specifications: With Side Clipboard Attached To The Reinforced Metal Structure With Seat, Back, Feet, Book Holder And Clipboard In High-Impact Thermoplastic Resin. Seat Must Be Manufactured In Virgin High Impact Thermoplastic Resin, Blue Color, Anatomically Molded With A Polished Finish On Its Edges And Textured On Its Inner Face, With Dimensions Of 500 Mm Wide, 440 Mm Deep, Anatomically Molded In Order To Provide User Comfort, Allowing Tolerance Of Up To +/- 7% For Width And Depth. On Its Posterior Face It Will Be Equipped With A Slight Recess That Has The Function Of Preventing The Retention Of Blood Circulation, While Its Lateral Faces Are Elevated, Forming A Kind Of Shell. It Has Sets Of Holes Or Openings Forming Air Inlets Positioned On Its Upper Face, Facilitating Ventilation Of The Seat During Use. The Height Of The Seat To The Ground Is 450 Mm, And It Should Have A Slight Inclination That Provides The User With A More Comfortable Position When Sitting. The Backrest Must Be Manufactured In Virgin High-Impact Thermoplastic Resin In Blue, With Dimensions Of 490 Mm Wide By 350 Mm High, With A Wall Thickness Of 4 Mm And Rounded Corners, With Sets Of Holes Forming Air Inlets Positioned In Its Upper Face Facilitates Ventilation Of The Backrest During Its Use, Allowing Tolerance Of Up To +/- 7% For Width And Height. The Backrest Must Have A Hand Grip Cavity To Facilitate Movement Of The Chair. Joining To The Structure Through Its Lower Cavities That Fit Into The Metal Structure, Locked By Locking Pins Injected Into Polypropylene Copolymer In The Same Color As The Backrest, Eliminating The Need For Rivets Or Screws. Side Board Must Be Manufactured In High Impact Thermoplastic Resin..., Set For Adult Dining Room, With Table And Chairs Minimum Specifications: In Thermoplastic Resin With Stackable Chairs, Composed Of Table And 08 Adult Size Chairs. Table With Tripartite Top Made Of Injected High-Impact Thermoplastic Resin, Measuring 800Mm X 800Mm Each. Total Table Height 760Mm. Tops Equipped With Ribs With A Minimum Thickness Of 4Mm, Edges Measuring 30Mm Wide, Fixed To The Structure Using Self-Tapping And Invisible Screws. Table Top Base Formed By 20Mm X 20Mm X 1.5Mm Square Tube Positioned Under The Tops Running Along Its Entire Length; Transversely Positioned, The Support Beams Provide More Firmness To The Tops, Being Two For Each Top, With Two Other Support Rods, In The Shape Of An X, Which, Positioned In The Middle Of The Tops, Prevent Them From Becoming Vulnerable In Their Center. . 04 Vertical Side Columns Connecting The Top To The Feet In A 1 ½? X 1.5Mm. All Parts That Make Up The Table Structure Must Be Joined Using The Mig/Mag Welding System. Tips In Injected Polypropylene Copolymer And Can Be The Same Color As The Top. In The Chairs, Seat And Back In Virgin And Unfilled Copolymer Polypropylene, Injected, Anatomically Molded. The Seat And Back Molds Must Be Engraved With The International Recycling Symbol, A Batch Date Indicating The Month And Year Of Manufacture, The Model Identification And The Name Of The Company Manufacturing The Injected Component. Can Be Inserted Into The Enco
|
