|
Cabinet With 02 Drawers: Structure In Metalon Tube 30X50mm, Top And Skirt In Mdf Or Plywood Coated With Formica, Measuring (1.20M Powder, Cja-06 — Student Set — Size 06 M Hate: Fnde Color: Blue Student Height: From 1.59M To 1.88M Table: Vertical Uprights And Longitudinal Crossbeam Made Of Cold-Rolled Carbon Steel Tube, With Stitching, Oblong Section 29 Mm X 58 Mm, On Plate 16 (1.5 Mm); Upper Beam Made Of Cold-Rolled Carbon Steel Tube, Curved In A C Shape, With A Circular Section Of 31.75 Mm (1 1/4), 5 Mm); Feet Made From Cold Rolled Carbon Steel Tube, Circular Section Of 38 Mm (1 1/2), 5 Mm). Top In Mdf Or Mdp Of 0.60M Electrostatic With Epoxy-Powder Paint, Blue Polypropylene Tip; The Remaining Dimensions Will Be In Accordance With Standard Nbr 14006:2008 (School Furniture — Chairs And Tables For Individual Student Sets), Corresponding To Their Dimensional Standard. Chair: Structure In Indl 20 Tube, 7Mm, Plate 14, With Seat And Back In Blue Polypropylene, Structure With Anti-Rust Treatment (Phosphating), Electrostatic Painting With Epoxy-Powder Paint, Tip In Polypropylene; The Remaining Dimensions Will Be In Accordance With Standard Nbr 14006:2008 (School Furniture — Chairs And Tables For Individual Student Sets), Corresponding To Their Dimensional Standard. Identification Of The Dimensional Standard: Pad Printing Must Be Printed On The Structure Of The Student Table, On The Right Side, External Face, And On The Back Of The Chair Back, This Being In Injected Polypropylene; For Pad Printing, Inks Compatible With The Substrate Must Be Used. That Are Applied (Injected Polypropylene / Epoxy-Polyester Powder Painting) So That, After Cured And Dry, These Prints Have Permanent Fixation, Are Not Washable, Are Resistant To Alcohol And Dust, Cja-04 - Student Set — Size 04 Model : Fnde Color: Red Student Height: From 1.33M To 1.59M Table: Vertical Uprights And Longitudinal Crossbeam Made From Cold Rolled Carbon Steel Tube, Oblong Section Of 29 Mm X58 Mm, 5 Mm); Upper Crossmember Made Of Cold Rolled Carbon Steel Tube, With Circular Section Of 31.5 Mm); Feet Made Of Cold-Rolled Carbon Steel Tube, Circular Section Of 38 Mm (1 1/2), 60M , Polypropylene Book Holder, Red Polypropylene Tip; The Remaining Dimensions Will Be In Accordance With Standard Nbr 14006:2008 (School Furniture — Chairs And Tables For Individual Student Sets), Corresponding To Their Dimensional Standard. Chair: Indl 20 Tube Structure, With Seat And Back In Red Polypropylene, Red Polypropylene Tip; The Remaining Dimensions Will Comply With Standard Nbr 14006:2008 (School Furniture — Chairs And Tables For Individual Student Sets), Corresponding To Their Dimensional Standard. Identification Of The Dimensional Standard: It Must Be Printed By Pad Printing On The Structure Of The Student Table, And On The Back Of The Back Of The Chair, Which Is Made Of Injected Polypropylene; For Pad Printing
|
