|
Baby Feeding Kit Collapsible U-Shaped Table Set, Composed Of Three Tables, And 04 Chairs To Accommodate Up To Four Children. Chairs Made From 3/4 Industrial Steel Tube, With A Thickness Of 0.12 Cm. Seat In Resin Nylon, Backrest With Internal Foam Protection, Safety Belt Clip To Accommodate The Baby, With A Fixed Part Folded In A U-Shape, Where The Seat Is Adapted , And Two Support Arms, Possible To Rotary Movement, Equipped With Suction Cups Made Of Black Nitrile Rubber With Hardness 50/55 Rubber Suction For Fixing On The Upper Part. Protective Rubbers In Black Rubber Nitrile With Hardness 50/55 With Ribs On The Surface To Support The Top On Its Lower Face, Through Which The Chair Is Fixed To The Top Of The Table, Being Firmly Fastened, For An Absolute Guarantee Of The Childs Safety Front Table Measuring Approximately 124 X 36 X 74Cm (Lpa), Produced In 1, 8Cm Thick Mdf, Covered At The Top In High Pressure Laminadomelaminic, With Songs And 0, 2Cm Deessessure And Rounded Corners. Two Side Tables Measuring Approximately 60X 36 Steel Tube Structure 5X3cm, Assembled In I, Finished In Pvc Tips, Riveted, 7Cm Hexagonal Joint Screws With Locking Nuts And Washers. All Metallic Structures Must Have Anti-Corrosion Treatment And Electrostatic Hybrid Powder Paint, Polymerized In An Oven. Kit Complement .Swivel Stool With Wooden Seat Base, Measuring Approximately 37 Cm In Diameter, Upholstered In Injected Foam, Covered In Vinyl, And Lower Face With Emtnt Coating. Swivel Base Structure, Five Legs With Castors, Gas Mechanism And Height Adjustment Between 44 Cm Minimum Height And 55 Cm Maximum Height. Foam Density: 52 Kg/M3 8Cm Thick., Hanging Chair For Baby Feeding Made From Industrial Steel Tube 3/4, With A Minimum Thickness Of 0.12Cm, Welded In Mig Process, Ground The Corners To Avoid Burrs And Sharp Corners. Seat In Resin-Coated Nylon, Backrest With Internal Foam Protection, Seat Belt With Clips To Accommodate The Baby, With A Fixed Part Folded In A Deu Shape, Where The Seat Is Adapted And Two Support Arms, Capable Of Rotating Movement, Equipped With Suction Cups In Nitrile Rubber Black With 50/55 Hardness Rubber Suction For Fixing On The Top Of The Table. Protective Rubbers In Black Nitrile Rubber 50/55 Attachments On The Support Face To The Top On The Lower Face Of Which The Chair Is Fixed To The Table Top, Being Firmly Attached For An Absolute Guarantee Of The Babys Safety., Fixed Upholstered Chair Fixed Upholstered Chair: Seat And Back In Injected Foam Covered In Black Vinyl. Seat Measuring 410X400mm, Backrest Measuring 360X290mm, Injected Foam With A Thickness Of 34Mm For The Seat And 30Mm For The Backrest. Structure In Steel Tube 1010/1020, With Diameter Of 22.3Mm(7/8), Thickness 1.2Mm With Lower Crossbeams Connecting The Parts. Structure In Black Color With Glossy Electrostatic Hybrid Powder Paint Polymerized In A Greenhouse. Closing Of Tops And Shoes/Tips In Polopropylene, Injected, Fixed To The Structure Through A Fitting. All Metallic Parts Must Be Joined Together By Means Of Welding, Configuring A Structure, Receiving Treatment Against Oxidation With The Provision Of
|
