|
Supply Of Adhesive For Fy 2023-24 At Csctpp, Chhabra , Instant Adhesive ( 50 Gm Pack ) , Ethyl Cyanoacrylate, Transparent Colorless To Straw Colored Liquid, Viscosity ( Brookfield Lvf, 25° C Spindle 1, Speed 30 Rpm ) Is 60 Cp, Tensile Strength, ( Iso 6922 ) On Buna-N Is 1990 Psi, Lap Shear Strength ( Iso 4587 ) Is 2060 Psi. , Flange Sealant ( 250 Ml Pack ) , Dimethacrylate Easter Based Orange Color Anaerobic Flange Sealant, Viscosity ( Brookfield Rvt, 25° C Spindle 6, Speed 20 Rpm ) Is 23000 To 35000 Cps, Compressive Shear Strength ( Iso 10123 ) On Steel Pinsand Collars Is 870 Psi, Tensile Strenght ( Iso 6922 ) Is 725 Psi, Coefficient Of Thermal Expansion ( Iso 11359-2 ) 80X10-6 K-1 , General Purpose Epoxy Compound ( 1 Kg Pack ) , Epoxy Compound Is A Two Component, Processing Time :- 15 Min ( Approx ) , Setting Time:- 60 Min ( Approx ) , Tensile Strenght :- More Than 200Kg / Cm2, Compressive Strength :- More Than 400 Kg / Cm2, Flexural Strength :- 350 Kg / Cm2, Impact Strength :- 3 Kg Cm / Cm2, Haedness:- More Than 75 Scale Value, Overlap Shear Strength :- More 90 Kg / Cm2, Di- Electric Strength- More Than 10 Kv / Mm, Water Absorbption :- Less Than 5%, Working Temperature Limit :- Upto 80° C , Standard Epoxy Adhesive ( 180 Gm Pack ) , Araldite Standard Is A Multipurpose, Two Component ( A & B ) Mixes To Form The Useful Adhesive ( C ) , Room Temperature Curing, Adhesive Of High Strength And Toughness. Its Properties Are:- Color:- [ A-Smooth Beige Paste, B- Smooth Cream Paste, C-Beige Paste ] , Specific Gravity :- [ A-1.4, B- 1.4, C- 1.4 ] ; Viscosity At 25°C ( Pas ) :- [ A-Thixotropic , B- Thixotropic , C- Thixotropic ] ;Lap Shear Strength At 25°C ( A501 ) *:- [ A-Nil , B- Nil, C- More Than 15 Mpa ] ; Pot Life ( 100 Gm At 25°C ) :- [ A- Nil, B-Nil, C- 30-40 Min ] , Instant Epoxy Adhesive ( 3 Gm Pack ) , It Is Medium Viscous, Instant Bonding Multipurpose Cyanoacrylate Adhesive , Appearance :- Clear ( Transparent ) , Viscosity @ 25°C :- 40-50 Centi Poise, Specific Gravity @ 30°C:- 1.05, Lap Shear Strength, ( Iso 4587 ) ( After 24 Hours @ 30°C And 50 %Relative Humidity Approx ) Is [ Ms.To Ms : 85 Kg / Cm2, Pvc To Pvc : 70 Kg / Cm2, Abs To Abs : 30 Kg / Cm2 ] , Operating Temp:- -50 To+80°C, Flash Point :- More Than 85°C, Gap Fill:- 0.10 Mm, Full Cure Time:- 24 Hours At At Ambient Condition. , Instant Adhesive ( 20 Gm Pack ) , Ethyl Cyanoacrylate Based Transparent Colorless To Straw Colored Instant Adhesive , Viscosity , Cone & Plate ( 25° C, Shear Rate: 3000 S-1 ) Is 12 To 22 Cps, Lap Shear Strenght ( Iso 4587 ) On Steel Is 2250 Psi, Tensile Strength ( Iso 6922 ) On Buna-N Is 1890 Psi. , Retaining Compound ( 250 Ml Pack ) , Methacrylate Easter Based Green Color Anaerobic Retaining Compound, Viscosity ( Cannon Fenske Iso 3104 ) Is 110 To 140 Cp, Compressive Shear Strength ( Iso 10123 ) On Steel Pins And Collars Is 2290 Psi, Coefficient Of Thermal Expansion ( Iso 11359-2 ) Is 80X10-6 K-1 , Instant Adhesive ( 20 Gm Pack ) , Ethyl Cyanoacrylate Based Transparent Colorless To Straw Colored Liquid, Viscosity ( Brookfield Lvf, 25° C Spindle 1, Speed 30 Rpm ) Is 25 To 55 Cp, Vapor Pressure Is Upto 1 Hpa, Softeningpoint ( Din En 1427 ) Is 165° C, Lap Shear Strength ( Iso 4587 ) Is 3770 Psi, Tensile Strength ( Iso 6922 ) Is 3625 Psi, Shear Strength ( Iso 4587 ) Is 160 Psi , Fast Set Steel Putty 500 Gm Kit-Max Cure Time Is 12 Minutes, Compressive Strength ( Astm D695 ) Is 74.5N / Mm2, Shear Strength ( Astm D1002 ) .125Mm Gap, Acid Etched Aluminium Is 13.8N / Mm2 , Tensile Strength ( Astm D638 ) Is 31.7 N / Mm2 , Hardness ( Astm D-2240 ) Is 80 Shore D , Thread Locker ( 250 Ml ) -Dimethacrylate Ester Based Green Color Anaerobic Threadlocker, Breakaway Torque ( Iso 10964 ) M10 Steel Nuts And Bolts Is 10 N.M, Compressive Shear Strength ( Iso 10123 ) On Steel Pins And Collars Is 780 Psi, Viscosity ( Brookfield - Rvt, 25 °C, Spindle 1, Speed 50 Rpm ) Is 20 To 55 Cps. , Insulation Tape Frlt Size 1.9 Cm ( W ) X0.3 Mm ( T ) X 20 Mtr. ( L ) , Size 25 Mm ( W ) X3 Mm ( T ) X20mtr. ( L ) , Size 25 Mm ( W ) X 6 Mm ( T ) X 10 Mtr. ( L ) , Water Proof Sealing Tape ( Top Seal ) : Size 50 Mm ( W ) X20 Mtr. ( L ) , Gasketingcompound ( 250 Ml ) -Dimethacrylate Ester Based Orange Color Anaerobic Flange Sealant, Viscosity ( Brookfield Rvt, 25 °C Spindle 6, Speed 20 Rpm ) Is 23, 000 To 35, 000 Cps, Compressive Shear Strength ( Iso 10123 ) On Steel Pins And Collars Is 870 Psi, Tensile Strength ( Iso 6922 ) Is 725 Psi, Coefficient Of Thermal Expansion ( Iso 11359-2 ) 80×10-6 K-1. , Gasketingcompound ( 50 Ml ) -Dimethacrylate Ester Based Orange Color Anaerobic Flange Sealant, Viscosity ( Brookfield Rvt, 25 °C Spindle 6, Speed 20 Rpm ) Is 23, 000 To 35, 000 Cps, Compressive Shear Strength ( Iso 10123 ) On Steel Pins And Collars Is 870 Psi, Tensile Strength ( Iso 6922 ) Is 725 Psi, Coefficient Of Thermal Expansion ( Iso 11359-2 ) 80×10-6 K-1. , Steel Putty 1 Lbs Kit -Metallic Grey Color Self Levelling Liquid For Repairs And Casting, Temperature Range Is –30° To +105°C, Working Life25 Minutes, Cure Time Is 6 Hours, Compressive Strength ( Astm D695 ) Is 93.1 N / Mm2, Shear Strength ( Astm D1002 ) .125 Mm Gap, Acid Etched Aluminium Is 13.1 N / Mm2, Hardness ( Astm D-2240 ) Is 86 Shore D , Instant Adhesive ( 20Gm Pack ) -Ethyl Cyanoacrylate Based Transparent, Colorless To Straw Colored Instant Adhesive, Viscosity, Cone & Plate ( 25 °C, Shear Rate: 3, 000 S-1 ) Is 12 To 22 Cps, Lap Shear Strength ( Iso 4587 ) On Steelis 2250 Psi, Tensile Strength ( Iso 6922 ) On Buna-N Is 1890 Psi. , Instant Adhesive ( 20 Gm Pack ) -Ethyl Cyanoacrylate Based Clear Colorless Slightly Hazy To Light Yellow Instant Adhesive, Viscosity ( Cone & Plate, 25 °C, Physica Mk22 @ 100 S-1 ) Is 900 To 1500 Cp, Dielectric Breakdown Strength ( Iec 60243-1 ) Is 25Kv / Mm, Lap Shear Strength ( Iso 4587 ) Steel ( Grit Blasted ) 2350 Psi. , Metal Rebuilding -Fixmastersuperior Metal ( 1Kg. Pack ) - Grey Color Epoxy, Working Life Is 20 Min, Tensile Strength ( Iso 527-2 ) Is 3900 Psi, Compressive Strength, @65ºc ( Iso 604 ) Is 19, 490 Psi, Lap Shear Strength ( Iso 4587 ) On Grit Blasted Ms Is 2820 Psi, Volume Shrinkage ( Iso 1675 ) Is 5%. , O-Ring Kit ( Mm Size ) -Kit Contains : A Knife, A Splicer And One Metre Long Nitrile Rubber Cord Of 1.6Mm, 2.4Mm, 3.0Mm, 5.7Mm And 8.4Mm Each. , Maintain-100 ( 312 Gms Aerosol ) -Stoddard Solvent Clear Liquid, Low Surface Tension Is 23.4 Dynes / Cm, Specific Gravity Is 0.8, Flash Point Is -142ºf.S , Gasket ( 300 Ml ) -Metallic Blue Oxime Silicon Compound, Room Temperature Vulcanizing ( Rtv ) , Tensile Strength ( Iso 37 ) Is 230 Psi Or More, Elongation ( Iso 37 ) 350% Lms Or More, Shore Hardness ( Iso 868 ) Durometer A 26 To 40Lms, Temp Range -60C To 260, Extrusion Rate : Pressure 0.62 Mpa, Time 15 Seconds, Temperature 25 °C , Semco Cartridge 250 To 600Lms, Flow ( Iso 7390 ) : After 2 Minutes @ 25 °C Is 12.7 Mm , Tack Free Time Cured @ 25 °C / 50±5 % Rh 10 Min. , Silicon Lubricant ( 150 Gm ) -Translucent Non Curing Lubrication, Density ( @ 25 °C ) Is 8.3G / Ml, Specific Gravity ( @ 25 °C ) Is1.01, Penetration ( Iso 2137 ) Unworked 250 To 400 1 / 10 Mm, Dielectric Constant / Dissipation Factor ( Iec 60250 ) @ 1 Khz Is 2.33 / 0.0045. , Requirement Of Nuclear Power Industry, Dba Tested, Nato Approved And Abs Approvade With 5 Year Shelf Life High Speed Emergency Repair Composite For Electrical Equipments With Following Specifications-Pack Size ;- 125 Gm, Shelf Life : 5 Year Shelf Life When Stored Between 00C To 300C Dielectric Strength : 218 Volts / Mil ( 8720 Volts / Mm ) Flexural Strength : 8600 Psi, Hardness [ Tested Per Astm D2240j : 71 Barcol, Temperature Range °C 150 Chemical Analysis: Analyze Total Concentration ( Ppm ) Fluoride 54 Chloride150 Bromide Nd ( <11 ] Sulfur 191 Nitrate2 Nitrate 8 Zink3.8 Antimony, Arsenic, Bismuth, Cadmium, Lead, Tin, Silver, Mercury.Galium And Indium - Nd ( <3.0 Application -Damage Insulators, Bearing Seats, Sealing Transformer Leakage From Body, Flange And Fins. , Quick Drying Contact & Part Cleaner Pack Size : 20Ltr. Residue Free, Odorless, Chlorinated Free Compound, Evaporation No ( Din 53179 ) Is 80-90, Kauri-Butnol Value ( Astmd 1133 ) Is 26 Or More, Min Surface Tension At 25 C Is 0.023 Mn / M. , Flange Sealant Pack Size : 50 Ml -Dimethacrylate Ester Based Red Color Anaerobic Flange Sealant, Viscosity ( Brookfield - Hbt, 25 °C Spindle Tc, Speed 0.5 Rpm, Helipath ) Is 3, 000, 000 To 4, 500, 000 Cp, Certified To Ansi / Nsf Standard 61, Registered To Nsf Category P1, Coefficient Of Thermal Expansion ( Iso 11359-2 ) Is215×10-06 K-1, Tensile Strength ( Iso 527-2 ) Is 1060 Psi, This Product Has Been Tested To -75°C ( -100 F ) , Anti-Seize & Lubricants Pack Size : 12 Oz Aerosol- Molybdenum-Disulfide Based Black Color Lubricant, Temp Resistance Is -29 °C To +1315 °C, Torque Coefficient ( 12.7 Mm Steel Bolts ( Grade 8 ) And Nuts ( Gradae 5 ) Is 0.12, Coverage, 0.018 Mm Dry Film Is55.7 M² Per 4.5 Kg, Olids / Non-Volatile Content Is 53 %, Curing Time @ 260 °C Is 0.5 Hours , Retener Pack Size : 50 Ml-Urethane Methacrylate Metallicis 2490 Psi, Gray Paste Acryoic Technology Based Retaining Compound, Viscosity ( Brookfield - Hbt, 25 °C Spindle Tb, Speed 0.5 Rpm Helipath ) Is 1, 000, 000 To 2, 000, 000 Cp, Compressive Shear Strength ( Iso 10123 ) Is 2490 Psi, Elongation, At Break ( Iso 37 Is 2 ) %. Pack Size : 50 Ml , Retaining Compound Pack Size : 50 Ml- Urethane Methacrylate Based Greencolor Anaerobic Retaining Compound, Registered To Nsf Category P1, Viscosity ( Cone & Plate, 25 °C Shear Rate 129 S-1 ) Is 1900 To 3100 Mpa.S ( Cp ) , Compressive Sheare Strength ( Iso 10123 ) Steel Pins And Collars Is 4200 Psi, Breakloose Torque ( Iso 10964 ) Pre- Torqued To N.M Is 23 N.M., Glass Transition Temperature ( Iso 11359-2 ) Is 76 °C. , Loctite-574 ( 250 Ml ) Or Equivalent Flange Sealent , White Pure Teflon Rod ( 33% Hcl Acid Proofl In Minimum Length Of I ( One ) Feet Of Size 25 Mm Dia , White Pure Teflon Rod ( 33O / O Hcl Acid Proof; In Minimum Leneth Of I ( One ) Feet Of Size 80 Mm Dia , Graphite - 50 Anti Seize ( 450 Gm / 1 Lb ) -Specific Gravity @ 25 °C Is 1.15 , Penetration ( Iso 2137 ) Is 270 To 370 1 / 10Mm, Weight Per Gallonis9.6 To 10.6 , Lbs / Gal, Torque Coefficient For 12.7 Mm Steel Bolts Is 0.16 N.M., Temp Range Is -29 C To 1315 C. , On Lline Electric Contact Cleaner Without Oil Base ( 415 / 500 Ml Pack ) ( Aerosol ) , Electric Contact Cleaner In Aerosol Pack Of 415 Ml ( Blend Of High Purity, Non-Flammable Cleaner And High Quality Lubricant To Clean Electri Contact And Switches ) , Electric Contact Cleaner Offline 440 Ml Pack ( Aerosol Cane ) , Loctite Fixmaster Steel Putty ( 454 Gram Pack ) , Rtv Silicone Gasket Maker 100Gms , Dr. Beck Becktol Red Varnish, Liquid , Thread Locker ( 50 Ml Pack ) -Dimethacrylate Ester Based Blue Color Anaerobic Threadlocker, Viscosity ( Cone & Plate, 25 °C Cone 35 / 2°Ti @ Shear Rate 129 S-1 ) Is 350 Cp, Compressive Shear Strength ( Iso 10123 ) On Steel Pins And Collars Is 1100 Psi, Breakloose Torque, Iso 10964 ( Pre-Torqued To 5 N·M ) Is 24 N.M., This Product Has Been Tested To -75°C ( -100 F ) . , Solvent Cleaner Aerosol Pack Size: 510 Gm- Methylene Chloride Based Grey To Off-White Spray, Specific Graavity @25 °C Is 0.9, Forming Time 5-10 Min , Requirement Of Nato Approved Three Year Shelf Life, Two-Component Base Fast-Curing Abrasion Resistance Polyurethane Elastomer For High Speed Emergency Repairs Of Rubber Components. Require Technical Data :- Shelf Life – 3 Years. Volume Capacity – 66.5. Base Component :- Appearance – Pale Straw Colored Viscous Liquid, Density – 1.2 G / Cm3 Solidifier Component :- Appearance –Black / White Paste, Density – 1.16 G / Cm3, Taber Abrasiob -Resistance With 1 Kg Load Will Typically Be :- H18 Wheel ( Wet ) – 45 Mm3 Loss Per 1000 Cycles, H18 Wheel ( Dry ) – 109 Mm3 Loss Per 1000 Cycles. Dialectical Strength Accordance With Astm D149 – 12, 000 Volts / Mm. Hardness ( Accordance With Astm D2240 ) : 75 Shore A, Pack Size 75 Gm , Requirenment Of Usda & Degussa Approved And 5 Year Shelf Life Coating Products For Protecting Surface Against The Effects Of Chemical Attack ( Excellent In 98% H2so4 And 36% Hcl ) With Following Specifications-Ote-Required Approval Of Anhevser-Busch For Use On Sulfuric Acid Bulk Tank.Pack Size ;- 1.5 Kgbase Gel, Color : Dark Red Or Grey, Strength : 70-120 G / Cm3, Density 1.34 – 1.38 G / Cm3solidifier, Color :Amber, Density 1.02 – 1.04 G / Cm3, Shelf Life : 5 Year Shelf Life When Stored Between 00C To 300Ctensile Shear ( Tested Per Astm D1002 ) : Steel – 2900 Psi.Compressive Strength ( Tested Per Astm D695 ) : 12, 000 Psi , Thermal Expansion ( Tested Per Astm E228 ) : 61.9 Ppm / 0C, Impect Strength ( Tested Per Astm D265 ) : 0.41 Ft. Lbs. / In. Temperature Range ? Dry 200, Wet 60, Chemical Resistane : Excellent In 98% H2so4 And 36% Hcl , Graphite - 50 Anti Seize ( 450 Gm / 1 Lb ) -Specific Gravity @ 25 °C Is 1.15 , Penetration ( Iso 2137 ) Is 270 To 370 1 / 10Mm, Weight Per Gallonis9.6 To 10.6 , Lbs / Gal, Torque Coefficient For 12.7 Mm Steel Bolts Is 0.16 N.M., Temp Range Is -29 C To 1315 C. , Birkosit Sealing Compound , Weicon Antisieze Assembly Paste
|
