|
Bids Are Invited For Sitc Of Ptz Camera Usb Based : Yes; Zoom : Minimum 20X Optical Zoom; Digital 16X; Iris: F=5.5~110Mm ; F1.6 ~ F3.5;Viewing Angle:3.3° ( Tele ) –54.7° Wide ;Sensor:1 / 2.8Inch Or Better Cmos Sensor; Mega Pixels:2.07 ; Video Format: Sdi Video Formats: 1080P60 / 50 / 30 / 25 / 59.94 / 29.97 ; 1080I60 / 50 / 59.94. 720P / 50 / 30 / 25 / 59.94 / 29.97; Minimum Illiumination:0.5 Lux ; Dnr:2D & 3D Dnr; White Balance :Auto / Manual / One Push 3000K / 3500K / 4000K / 4500K / 5000K / 5500K / 6000K / 6500K / 7000K; Electronic Shutter : Auto / Manual; Focus : Should Be Auto / Manual / One Push; Blc:On / Off; Wdr : Off / Dynamic Level Adjustment; Video Adjustment: Brightness, Color, Saturation, Contrast, Sharpness, B / W Mode, Gamma Curve; Snr : >55 Db; Interface : Usb 2.0 X1 , Usb 3.0 X1, Lan X1, Rs232 X 1, Hdmi X 1 ; Audio Invideo Compression Format:H.265 / H.264 ; Control Protocol: Visca / Pelco-D / Pelco-P; Baud Rate : 11520 / 9600 / 4800 / 2400 ; Lan Port :Yes; Network Protocol: Rtsp / Rtmp / Onvif, Gb / T28181; Pan Rotation:+ 170° Tilt Rotation :- 30°~+90° ; Pan Control Speed: 0.1~60° / Second ;Tilt Control Speed : 0.1~30° / Second ;Preset Speed: Pan: 60° / Second, Tilt 30° / Second ;Preset Number:255 Preset Item No. 2 SITC of Celling Mount for Camera Item No. 3 SITC of Camera switcher : It should be dual channel video switcher mixer for the streaming generation, mini-pro features four resolution independent inputs – three up to 2K and one up to full 4K@60 to take advantage of native high-performance sources, whether cameras or laptops, without compromising on quality; It should have presets for PIP and PBP , it should also include full pixel-to-pixel scaling capabilities for both the PIP and background video layers ; It should have Audio for output should be selectable from embed ,It should have builtin LCD display just not to only shows video preview, but it should be touch enabled for day to day operation of features and settings. ; It should have features including dynamic output control, preview multi-view, picture in picture, Chroma Key, video transitions, on board PTZ camera controls etc.; Stream : It should have superspeed USB3.0 streaming in which just by connecting the device to a laptop or other device it should stream quickly and easily to various social media and streaming platforms as well as a vast array of popular collaboration applications.; Go Live : It should be able to display local and live with the 2K HDMI output port – which should be used for a preview or the live program output. It should be more than a streaming switcher and should also be a live event switcher; Record: It should be able to from dedicated USB port to capture, record video and audio directly from the device with any portable HDD up to 2TB.; Control : It should have on board control for PTZ cameras directly within the device. It should save attribute views of cameras for recall at the touch of a button.; Preview : It should be able showcase all sources live immediately in the builtin LCD display. It should have the facility to get connected to a video output and should display a multi-view preview to always see the next preset before going live.; Mix : It should have transition and switch between live video program and preset. It should be able to recall saved preset views along with scaled video layers. Item No. 4 SITC of Chairman Unit Microphone: Base Unit -Frequency Response: 40Hz-16KHz; Sensitivity: -44 dB:2dB ; Supports Discussion & Video; Chairman Base Unit should have Talk button along with Priority Button; The talk button should have built-in Dual colour LED light, Green colour indicating its On & Red colour indicating to talk. Connectivity : Daisy Chain connection with Loop In Loop Out; Connection : 8 Pin; Base Dimension :120( L ) mm x 85mm (W) x 20mm(H);Microphone : It should have detachable Microphone ; Polar Pattern – Cardioid; LED Light – Should have Red Ring LED Light Indicating Microphone ON/Off; Microphone Length - 420mm or more Item No. 5 SITC of Delegate Unit Microphone: Base Unit -Frequency Response: 40Hz-16KHz; Sensitivity: -44 dB:2dB ; Supports Discussion & Video; Delegate Base Unit should have Talk button; The talk button should have built-in Dual colour LED light, Green colour indicating its On & Red colour indicating to talk Connectivity : Daisy Chain connection with Loop In Loop Out; Connection : 8 Pin; Base Dimension :120( L ) mm x 85mm (W) x 20mm(H);Microphone : It should have detachable Microphone ; Polar Pattern – Cardioid; LED Light – Should have Red Ring LED Light Indicating Microphone ON/Off; Microphone Length - 420mm or more Item No. 6 SITC of Audio Controller : The main unit of the portable digital conference system can support 60 units of Chairman & Delegate microphone. ; It support 250 Microphones with extension power unit.; Equipped with four groups or 8p-DIN interface for system connecting.; Modes : Discuss mode, Free mode, FIFO mode (1-9),Limit mode (1-9) ; 9 Microphones can be on at a time. First In First Out ; The working mode is displayed on LCD screen. ; Look At Me – Speaker tracking compatible with camera and processor; Connection: 8PIN x 3 plugs for Microphone ; 8 PIN x1 socket for system connection; RCA : 4 x RCA Port; RJ 45 x 1; XLR Port x 1 Item No. 7 SITC of integrated Look At Me Processor with Audio controller :Integrated Look At Me controller-Should have Built-in video switching matrix having 4 HDMI inputs& 1 HDMI output. , Should have 256 video camera auto-track control points, Should support Multimachine cascade. It should support Pelco-D and VISCA protocol (Pelco-D, Baud Rate: 9600, VISCA, Baud Rate: 9600). , The processor should communicate with the equipment by RS232 interface, with computer or video switching matrix. It should support High speed shifting with the camera which shall follow the location for last opening of all speaking representative, when the microphone which opened last was closed, the camera should follow back the last following spot, and when all the microphone are closed, the camera should automatically moves back to the standby position. When its working without the computer, it can be set through the controller itself with the button on board, and should also set by the IR controller. It should consist of power switch, Camera number selecting button (VIDICON 1- 8), Send the camera output to the related display screen through pressing this button, Processor power indicative lamp, , Busy indicative lamp, Camera selecting indicative lamp, Camera zoom setting, Camera direction set button (up, down, left, right), Save button (save the pre-setting spot), USB connection interface to PC, and for connecting to another video matrix, Should have the port to connect it computer to setup the software function. It should control pan and tilt move directly from software., It should have Data port to connect to the main conference unit, These inputs should get connected with the camera and should support 4 cameras. Should have HDMI Out to show camera output directly to a display Item No. 8 SITC of Amplifier: Power Output 300W Max., 250W RMS at 10% THD, 220W RMS at 5% THD, Output Regulation 2 dB, no load to full load at 1kHz, Input Channels 6 X Mic. 0.65mV/4.7k Ohms , 2 X Aux 100mV/470k Ohms, Frequency Response 50-15,000Hz ±3dB, Signal to Noise Ratio 60dB, Tone Controls Bass ±10dB at 100Hz, Treble±10dB at 10KHz, Outputs Line: 200mV/600 Ohms, 1V/1k Ohms, Speaker Output 4 Ohms, 8 Ohms & 100V, Digital Player MP3 Player with USB, SD Card & Bluetooth, Power Supply AC: 220-240V 50/60Hz , DC: 12V, Power Consumption : AC : 250VA DC : 4A, Power Consumption AC : 250VA DC : 4A, Consist of USB Pen drive Port SD Card Plug and Play, Compatible with Radio & Bluetooth, EQ & Recording, 5 Channels Microphone Inputs, 2 Channels Aux Inputs, 1 Channel Line Output. 100V Constant Voltage Output and 4Ω\ 8 Ω \16 Ω Resistance Output. Item No. 9 SITC of Wall mount Speaker: Power Tap: 10W/20W/40W/OFF-8ohm,Power at 8ohm, 60W;Peak Power: 80W,SPL@1M: 94±3db, Max SPL@1M: 112db, Frequency Response: 65- 20KHz,Dispersion Angle: Vertical : 80° and Horizontal:100° (1KHz),Enclosure Material : PP Enclosure and 360-degree metal mounting bracket, Speaker 6.5” weatherproof woofer and 1” silk tweeter. Item No. 10 SITC of Digital signal processor : Should have Double Core chip having 456MHz or better; Should have Microphone Inputs x 04 or more; Should have Microphone / Line outputs x 04 or more ; Should have Input processing’s with Preamp, Signal Generator, Expander, Compressor, 5-band parametric equalisation, Auto gain, AM auto mix function, AFC Adaptive Feedback Cancellation; Should have Output processing with Speaker management having 31-band graphic equaliser, delay, crossover, limiter, high and low channel filters; Should have Matrix Mixing of input and output signals, mixing component control or better; Should have Automatic Mixing Console ; Should have AFC Auto feedback elimination; Should have Auto Echo cancellation; Should have Auto Noise Cancellation module; Should have Automatic mixing console, Ducker, or better, Should have built-in USB as Microphone in and Audio out for Software based VC as well as for recording the conference and playing digital audio, Should have camera tracking for Look At Me / Speaker tracking, Should have minimum 8 GPIO ports free to configurable as required.; Should have Central Control Command Cet Generator ; Should have Sampling rate of 48Khz or better, Frequency response of 20Hz – 20Khz + 0.2dB or better, Should have input gain amplification of -24～ 27dB 3dB,Level 1 with minimum 7 levels or better; Should have background noise -90dBu or better ; Should have THD+N ≦0.004% @4dBu or better ; Should have Automatic power failure protection memory function; Should have per channel phantom power 48V module or better. ; Should have software which should be configurable PC and also through Mobile devices like Smart phones, Tablet etc. Should have password facility to avoid misuse having separate password for the admin and separate for users. Should have facility to save the different setting done in a file upto 100 or more settings. ; Should have Ethernet Port RJ 45 x 1; Should have RS 232 x 1; Should have RS 485 x 1. Item No. 11 SITC of HDMI Extenders up to 50 Mtr Item No. 12 SITC of Distribution Amplifier 1 HDMI In 4 HDMI Out. Item No. 13 SITC of Rack 17U Item No. 14 Cable & Connectors(Aprox.) Item No. 15 Installation (Aprox.) Total Quantity : 25
|
