Pneumatic Sweeper 1/4, 6Mm 25000Rpm, Pneumatic Angled Sweeper 1/4.6Mm 18000Rpm, Pneumatic Ratchet 1\2 102N/M. 160Rpm, Pneumatic Hammer 3200Rpm, Chisel For Pneumatic Hammer Kaja18e1, Chisel For Pneumatic Hammer Kaja18d1, Chisel For Pneumatic Hammer Kaja18c1, Chisel For Pneumatic Hammer Kaja18b1, Chisel For Pneumatic Hammer 10Mmxl178mm Kaja18 A1, Retaining Ring Remover Set Reinforced 4 Units (In Case), Wrench For Articulated Steering Rack 33-42Mm, Pliers For Pivot Clamps, Power 1/2 760Mm Jointed Jack, Clamp Removal Pliers Straight, Clamp Removal Pliers, Curved At 45°, Dead Lock Washer Remover, Puller Deaf Lock Washers Curved, Set Of Socket Wrench 6-32 Mm (Angle 45°) 12 Units, Set Of Impact Long Heads 1/2 12 Units. 8,10,12~19,21,22Mm (On Plank), Damaged Nut Head Set 1/2 9 Pcs, Hex Impact Head Set 1/2 4-14Mm 7 Pcs, Torx Impact Head Set 1/2 T30-T70 7 Units, Set Of Heads For Oil Drain Plugs 14 Units, Set Of Heads 12-Gr. 1/2 23 Units 8~28,30,32 Mm (On The Plank), Set Of Combination Wrenches With A Ratchet 8-19 Mm In A Bag 12 Units, Set Of G-Shaped Socket Wrenches. 10 Units, Extension Floating 1/2 600Mm, Extension Floating 1/2 380Mm, Impact-Rotary Screwdriver 8 Units, Set Of Socket Wrench 6-32Mm (Angle 75°) 12 Units, Bit Set Torx, Hex, Spline, Ribe, Sq 60 Unit, Device For Installing Band Clamps Pivot, Ratchet 1/2 36 Teeth (Rubber Handle), Traverse Extended For Hanging Engine With Two Grips 500 Kg. L-1800, Set Of Mitchiks And Dies 40 Pcs. M3~M12, Set Of Pliers 4 Pcs., Set Of Tweezers 4 Pcs., Soldering Iron Gas 150 W With A Set Of Nozzles 8 Pcs. Impact) 6 Units (Рн1x75, Рнх100, Рнх150, Sl5, 5X100, Sl6,5X150, Sl8x175), Set Of Picks And Cores In Case 10 Units, Set Of Chisels In Case 5 Units, Telescopic Magnet 3.51B / 52G / 13~16 Cm (L), Flexible Magnet L562mm, Clamping Pliers With Clamp And Nippers 250Mm Pro-Series, Magnetic Tray 240X140x42mm, Piston Remover 9X120mm, Piston Remover 6.2X115mm, Pneumatic Jack Dpa-3C 4.2T, Pneumatic Jack Dpa-2C 2.8T, With Application Of For Clutch Disc Centering, Set Of Pliers For Crimping Pipelines 3 Units, Open Key 8X10, Open Key 9X11, Open Key 12X13, Refractometer For Determining The Concentration Of Antifreeze, Electrolyte, Washer, Adblue.
|