|
Junior Construction Civil Engineer With Additional Charges, Supply And Placement Of Construction Sign In Galvanized Sheet #26, Esp. 0.45Mm, Dimension (3 X 1.5)M, Plotted With Vinyl Adhesive, Affixed With Rivets 4.8 Painted With Pva Paint In Two (2) Coats, Location Of Work With A Template Of Planks With Points Every 2.00M, Reuse (2X), Including Monitoring Of A Topographic Team To Mark A Topographic Point, Manual Removal Of Water Inlet Pattern, With Reuse, Including Removal And Stacking, Exclusive Transport And Removal Of Non-Reusable Removed Material, Manual Demolition Of Ceramic Brick Or Concrete Block Masonry, Exclusive Transport And Removal Of Demolished Material, Manual Demolition Of Reinforced Concrete, Manual Demolition Of Stone Floors (Marble, Granite, Slate, Etc.), Exclusive Demolition Of Subfloor, Transport And Removal Of Demolished Material, Manual Demolition Of Plaster Or Plaster, With A Thickness Of Up To 55Mm, Manual Removal Of Framing For Ceramic Or Concrete Type Tile, Manual Removal Of Ceramic Tile, Including Fastening And Stacking, Manual Removal Of Metal Frames, Including Frame/Alizar/Trims, Spacing And Stacking, Manual Removal Of Pre-Molded Concrete Curb Guide, Manual Demolition Of Cemented Floor Or Mortar Subfloor, With Maximum Thickness Of 10Cm, Manual Excavation Of A Trench With A Depth Of Less Than Or Equal To 1.5M, Manual Drilling Of Piles With Auger Type, Including Spacing, Exclusive Of Reinforcement, Structural Concrete, Transport And Removal Of Excavated Material, Manual Backfilling Of Trenches, Shape And Dismantling Of Board And Batten, Reuse (3X) (Foundation), Supply Of Structural Concrete, Prepared On Site With A Concrete Mixer, With Fck 25 Mpa, Including Laying, Thickening And Finishing (Foundation), Slim Concrete Ballast, Including Transport, Laying And Densing., Cutting, Bending And Assembling Ca-50 Steel Diameter (6.3Mm To 12.5Mm)., Bending And Assembling Ca-60 Steel Diameter (4.2Mm To 5.0Mm), Reuse (3X), Exclusive Shoring, Prepared On Site, Densification And Finishing, Painting With Asphalt Emulsion, Two (2) Coats, Sealing Masonry With Perforated Ceramic Brick, Esp. 9Cm, For Cladding, Including Mortar For Laying, Hollow Element Masonry, Cobogó Ceramic (18X18cm), Esp. 7Cm, With Apparent Finish, Structural Masonry With Concrete Block, Esp. 14Cm, (Fbk 4.5Mpa), Masonry Tie Strap With Structural Concrete Block, Type U Channel, Exclusive Grout And Frame, Lintel Or Counterbeam In Structural Concrete For Spans Above 150Cm, Control A, With Fck 20 Mpa, Molded On Site, Including Frame, Standard Iron Gate, In Sheet Metal (Lambri Type), Placed With Padlock, Chapin On Linear Walls, In Granite Or Marble, L = 25 Cm, Laid With Mortar 1:6 With Additive. Af_11/2020, Execution Of Interlocking Flooring, Thickness 8Cm, Fck 35Mpa, Including Supply And Transport Of All Materials And Laying Mattress Thick 6Cm (Pavi -S), Concrete Floor, Conventional Machined, Fck 15Mpa, With Ribbed Welded Mesh Type Q-138, Zero Polished Finish, Esp. 10Cm, Including Supply, Launching, Densification, Exclusive Expansion Joint, Curb Guide, In Concrete With Fck 20Mpa, Pre-Molded, Mfc-01 Der-Mg Standard, Dimensions (12X16, 7
|
