|
Nylon Clamp 6.6 (High Resistance), With Ultraviolet Protection, Length 200 Mm X 4.8 Mm Wide, Pack Of 100 Units., Nylon Clamp Black, 6.6 (High Resistance), Length 100 Mm X 2.5 Mm Wide, Pack Of 100 Units, Reusable Nylon Clamp With Nylon Lock 6.6 (Allta Resistencia), Length 250 Mm X 7.6 Mm., Instant Adhesive Based On Cyanoacrylate, For Gluing Porous And Non-Porous Materials. Tube Content 05G., Needles, For Cleaning Cutting Nozzle, Used In Torch., 08/04/2023, Needle/Cleaner Of Cutting Nozzles And Welding Extensions, Metallic Case With 13 Round Cleaners And One Flat., Nozzle Cutting No. 10 - 152, 0 Mm X 254, 0 Mm, Cutting Nozzle, For Torch With Seat 1502, Number 10, Number 2., Number 4, Number 6, Number 8, Nozzle For Mig Torch M8 X 30 X 1.0 E - Cu, For Weld Wision Welding Machine, For Wire Of 1 Mm., Electrode K-46 2.5 Mm, Pack Of 01 Kg, Electrode K-46 3.25 Mm, Tins In Wire For Welding, Wire Thickness 1, Composition Of Tin And Lead 60% X 40%, Reel With 500 Grams, With Resin, Soldering Iron, Plastic Handle, For Soldering With Tin In Wire, Power 100W, Voltage 220 V, Anti-Spatter Solder Spray Bottle, Bottle With At Least 300 Ml, Ground Clamp For Electric Welding 500 Ah, Rectangular Lens (Glass), Measure 108 X 51 Mm, Shade 10, For Solder Mask., Shade 12, Cutting Torch Used For Cutting Steel Plates, Consisting Of 3 Stainless Steel Tubes And Lever, Cutting Capacity 300 Mm, Length 560 Mm, 45º Head, 90º Head, Cutting Torch, With Three Pipes In Line, Gas Mixture Performed In The Torch Head, External Cutting Nozzle, For 1502 Seat Nozzles, Head Angle Of 90º, Approximate Length Of 520 Mm., Oxy-Acethylene Welding Torch Nº 201, Roll Of Mig Welding Wire For Iron Welding 1.0 Mm, With 15 Kg, Oxy-Acethylene Welding Extension, Model 201 No. 2, Model 201 No. 4, Model 201 No. 6, Model 201 No. 9, Check Valve For Torch, For Oxygen And Acetylene, Safety Valve, Electrode Holder Pliers 500 Ah, Nozzle Pliers Boring, With Insulated Cable For 1,000 V, Anti-Slip With Protection Tabs, That Meets The International Standard En/Iec 60900:2004, Curved Half-Shank Nose Pliers, Straight Half-Shake Nose Pliers, Water Pump Pliers Made Of Carbon Steel, 12 ( 300 Mm), With Jaws With Deep Grooves For Greater Adherence, With Non-Slip Handle., Pressure Pliers, Jaws Forged In Special And Tempered Steel, Or Chrome Vanadium Steel, Body Formed By Conformed Sheets, Chrome Finish, Adjustable Opening, With Lever For Unlock, Jaws With Curved Profile, Plastic Support, Size: 10(250 Mm), Curved Jaws Forged In Special Steel And Tempered, Size: 10, Automatic Stripping Pliers, Metallic Body, Closing Controlled By Spring, For Stripping Wires And Cables Of 1 , 25 Mm² To 4.0 Mm², Enabling Stripping At The Ends And In The Middle Of The Wire. Must Accompany Cutting Guide With Limiter., Multipurpose Pliers For Electricians, Measure 9.1/2, In Carbon Steel, Phosphate Finish, Suitable For Cutting Wires Up To 4 Mm², Pressing Terminals From 1, 5 Mm² To 6 Mm² And Stripping Wires From 0, 75 Mm² To 6 Mm², Telephone Type Pliers Curved Nose 45º, 8 (203 Mm), With Insulated Cable, Phosphated, For Electrical Maintenance In Places Of Difficult Access, For Handling Terminals And Cutting Wires And Soft Wires, Universal Pliers, Body Forged In E Steel
|
