Tenders Are Invited For Rehabilitation Of Kahda And Elasha Tb Facilities 1 Remove The Roof And Ceiling Completely, Clear All Demolished Debris From Site And Properly Dispose With Out Environmental Damage M² 80.4 2 Construction Of Concrete Hallow Block Walls (40X20) Strong Enough To Will 1.6 Free Fall Proficienaly Produced (This Is For Partition Wall) M² 8 3 Construction Of Concrete Hallow Block Walls (40X20) Strong Enough To Will 1.6 Free Fall Proficienaly Produced (Brick Table Of The La Room) This Also Includes Installation Of While Tiles On The Table M² 5 4 Remove All Minor Cracks, And Damage Surface Appearing On The Wall Both Internal And External By Using 1:3 Cement Sand And Plaster Properly M² 78 5 Plastering Newly Constructed Walls Using 1:3 Cement Sand Ratio. Use Wire Mesh At Joints Of Existing Wall And Newly Constructed Wall To Prevent Crack Development. Make Sure Joints Of Part Of Existing Walls And Newly Constructed Aligned Smoothed M² 26 6 Remove Old Painting Of Existed Wall Completely M² 188 7 (External Wall And Internal Walls): Apply One Coat Of Prime And Two Coats Of Rough Texture Painting With Shinings (And Smoothing All Internal Walls M² 188 8 30Cm Backfilling Using Selected Materials (Caro-Kawo), Placed Inlayers,20Cm And 10Cm, Levelling, Watering And Compacting, Using Suitable Compaction Machine M³ 5 9 Apply 8Cm This Plan Concrete M² 13.5 10 Supply And Install Class 1 Quality Floor Tiles (40X40) Cm Properly Placed And Aligned Using High Quality Adhesive Materials. Tiles Should Be Either Emarati, Tarshish Or Equivalent With Guidance Sc Engineer. The Should Be Non-Slippery Type With Consideration Users Safety. This Is For Only The Waiting Area M² 13.5 11 Construct Complete Lean Of Roof Including Truss Using 150X25mm, 80X40,50X25, 50X25 Purlins. Tie Beam Should Be Double) This Includes Rust Resistant Iron Sheet Gauge 28(Macdan), Plastic Cap Nails M² 80.4 12 Supply And Install The Roof Ceiling Using Plastic Ceiling Of 60X60cm Class 1 With All Support Structure M² 80.4 13 Supply And Fix Semi Pedestal Wash Hand Basin, With One Central Tap Hole 75Mm Ø Deep Seal 200Mm Tail Pipe Cap-Nut And Wall Flange. Hansgrohe Cup Shed Bottle Trap Chrome And Angle Valve Complete With Tap And All Necessary Connections Item 2 14 Prepare Pharmacy Shelves Made Of High Quality Wooden Smoothed My Machine Or Hand-Crafting 6X3m Including Front Table, This Will Be Well Designed, Decorated High Standed One. Both Shelves And Table Should Be Completed All Aspects, As Per Guidance Of Engineer/Medical Technical Persons. M2 7.00 15 Electricity (Electric, Fan Cables, Sockets Switches And Lamps, All The Wires Should Be Concealed Inside The Walls) Front Side Should Have Two Lights With Rain Water Protection. This Includes Electric Control Box. Ls 1.00 16 Metal Filling Cabinet (Sturdy Metal Cabinet With Two Sections, Double Swing Doors In Each Section, Upper Door Glass, Shelves In Each Section) All Units Have To Come Assembled On Site Pcs 1.00 17 Office Chair; Swivel, Black, Movable Wheels, High Back Pcs 2.00 18 Wooden Office Desk (140Cmx60cm) With Lockable Metallic Drawers And With Appropriate Thickness Pcs 2.00 1 Construction Of Concrete Hallow Block Walls (40X20) Strong Enough To Will 1.6 Free Fall Proficiently Produced (This Is For Partition Wall) M² 3.5 2 Remove All Minor Cracks, And Damage Surface Appearing On The Wall Both Internal And External By Using 1:3 Cement Sand And Plaster Properly Ls 1 3 Remove Old Painting Of Existed Wall Completely M² 182 4 (External Wall And Internal Walls): Apply One Coat Of Prime And Two Coats Of Rough Texture Painting With Shining (And Smoothing All Internal Walls M² 182 5 Construct Complete Lean Of Roof Including Truss Using 150X25mm, 80X40,50X25, 50X25 Purlins. Tie Beam Should Be Double) This Includes Rust Resistant Iron Sheet Gauge 28(Macdan), Plastic Cap Nails (This For The Waiting Area) M² 10 6 Supply And Install The Roof Ceiling Using Plastic Ceiling Of 60X60cm Class 1 With All Support Structure M2 10 7 Supply And Fix Semi Pedestal Wash Hand Basin, With One Central Tap Hole 75Mm Ø Deep Seal 200Mm Tail Pipe Cap-Nut And Wall Flange. Hansgrohe Cup Shed Bottle Trap Chrome And Angle Valve Complete With Tap And All Necessary Connections Item 2 8 Prepare Pharmacy Shelves Made Of High Quality Wooden Smoothed My Machine Or Hand-Crafting 6X3m Including Front Table, This Will Be Well Designed, Decorated High Standed One. Both Shelves And Table Should Be Completed All Aspects, As Per Guidance Of Engineer/Medical Technical Persons. M² 7.00 9 Supply And Install Red Wooden Door(0.9X220) Pcs 1.00 10 Electricity (Electric, Fan Cables, Sockets Switches And Lamps, All The Wires Should Be Concealed Inside The Walls) Front Side Should Have Two Lights With Rain Water Protection. This Includes Electric Control Box. Ls 1.00 11 Metal Filling Cabinet (Sturdy Metal Cabinet With Two Sections, Double Swing Doors In Each Section, Upper Door Glass, Shelves In Each Section) All Units Have To Come Assembled On Site Pcs 1.00 12 Office Chair; Swivel, Black, Movable Wheels, High Back Pcs 2.00 13 Wooden Office Desk (140Cmx60cm) With Lockable Metallic Drawers And With Appropriate Thickness Pcs 2.00 Tender Link : Https://Somalijobs.Com/Tenders
|