|
Annual Repair And Maintenance Contract For Zones 5 And 6 Of Iit Kanpur As Per The Tender Document 1.01 Manpower 1.02 Facility manager Grade 1 1.03 Facility manager Grade 2 1.04 Supervisor (Skilled) 1.05 Multi skilled worker(Skilled) 1.06 Plumber (Skilled) 1.07 Carpenter (Skilled) 1.08 Welder (Skilled) 1.09 Electrican (Skilled) 1.1 Semi-Skilled Worker 1.11 Helper (UnSkilled) 1.12 Consumable Material (Civil) 1.13 "Al-Curtain Rod(Pipe) Dia 20 mm length 3600 mm" 1.14 Al-Bracket 'L' Type 20 mm dia 1.15 Al-Bracket 'T' Type 20 mm 1.16 Al-Tower bolt 200 × 10 mm 1.17 Al-Tower bolt 150 × 10 mm 1.18 Al-Tower bolt 100 × 10 mm 1.19 Al- door handle 100 x10 mm 1.2 Al-Door handle 125 mm 1.21 Al-Rubber door stopper (Double) 1.22 Brass Door Stopper (Single Leg) 1.23 Aluminium door floor spring 1.24 Aluminium door hasp and staple 125mm 1.25 Al-Hasp & Staple 115 mm 1.26 Aluminium window handle 1.27 Al-window SS friction stay 250 mm 1.28 Al-window SS friction stay 350 mm 1.29 Al-door seal with rubber or brush 3 ' long 1.3 Al-Sliding door bolt 300 × 16 mm 1.31 Al-Sliding door bolt 250 × 16 mm 1.32 Door seal 4 feet 1.33 GM/Brass Gate valve 20 mm 1.34 Brass Gate valve 15 mm 1.35 GM/Brass Gate valve 25 mm 1.36 Brass gate valve 32 mm 1.37 GM/Brass Gate valve 40 mm 1.38 Brass Bib Cock 15 mm 1.39 Brass Ball Cock 20 mm 1.4 Brass Ball Cock 25 mm 1.41 Brass Ball Cock 32 mm 1.42 Brass Ball Cock 15 mm 1.43 Brass Ball Valve 20 mm 1.44 Brass Rod for Ball Cock 15 mm 1.45 Brass Phase for Stop Cock(Pillar Cock) 15 mm 1.46 Brass Stop Cock 15 mm 1.47 Brass Sliding door bolt 250 x 16 mm 1.48 Brass Tower Blot 250 x 10 mm 1.49 Brass Spendle for Consealed Stop Cock 15 mm 1.5 CP Bib Cock (Short Body) 15 mm 1.51 CP Bib Cock (Long Body) 15 mm 1.52 CP pillar Cock 15 mm 1.53 CP Angle Valve 15 mm 1.54 CP revolving shower 15 × 75 mm 1.55 CP Grating 125 mm 1.56 CP Grating with hole cutting 125 mm 1.57 CP Hand shower with connection(Health Faucet) 1.58 CP Jet Connection with Jet 1.59 CP Extension piece 15 × 50 mm 1.6 CP Extention piece 15 × 75 mm 1.61 CP Flange 15 mm 1.62 Flush valve for W.C 40 mm (Consealed type) jaguar Make 1093 1.63 CP Toilet paper holder 1.64 C.P/Brass Towel Rail (600 X 20) mm 1.65 Commercial Ply 4 mm (2.44 ×1.22)mt 1.66 Commercial Ply 6 mm (2.44 ×1.22)mt 1.67 Commercial Ply 12 mm (2.44 ×1.22)mt 1.68 Commercial Ply Board 19 mm (2.44 × 1.22)mt 1.69 CP Nozal Cock 15 mm 1.7 CP Swan neck piller cock 15 mm 1.71 CP Waste 32 mm Fullthread 1.72 CP Bottel trap 32 mm 1.73 CP Copper Connection with nutt and washer(15 X 450) mm 1.74 CP Copper connection without nut & washer 15 × 450 mm 1.75 CP Copper Connection with nutt and washer(15 X 600) mm 1.76 CP Hand Shower Chain / 1.5 mtr Lead 1.77 CP Soap Dish 100 mm 1.78 CP Two way angle valve 15 mm 1.79 C.P Brass Push Cock for Urinal 15 mm 1.8 CI Bib Cock 15 mm 1.81 CP Coat pin hanger (two pin) 1.82 CP Adapter 20 mm 1.83 Bond tite [360 gram] 1.84 Door Closer 1.85 Drill bit (4.0 mm) 1.86 Drill bit (10 mm ) 1.87 Drill bit (3 mm ) 1.88 Drill bit 6.5 mm for hammer drill 1.89 Drill bit 6.5 mm 1.9 Drill bit 25 mm for hammer drill 1.91 Drill bit (16 mm ) 1.92 Drill bit (12 mm ) 1.93 Electric welding rod 1.94 Fevicol 5 KG (Pack) 1.95 GI Pipe 32 mm 1.96 GI Pipe 25 mm 1.97 GI Pipe 20 mm 1.98 GI Pipe 15 mm 1.99 GI Pipe 40 mm 2 GI Pipe 50 mm 2.01 Fastner with washer ( 10x100) mm 2.02 GI Socket 32 mm 2.03 GI Socket 25 mm 2.04 GI Socket 20 mm 2.05 GI Socket 15 mm 2.06 GI Socket 40 mm 2.07 GI Reduser Socket 25 × 15 mm 2.08 GI Reducer Socket 20 × 15 mm 2.09 GI Reduser Socket 25 × 20 mm 2.1 GI Reduser Socket 32 × 25 mm 2.11 GI Reducer Socket 40 × 25 mm 2.12 GI Elbow 32 mm 2.13 GI Elbow 25 mm 2.14 GI Elbow 20 mm 2.15 GI elbow 15 mm 2.16 GI elbow 40 mm 2.17 GI elbow 50 mm 2.18 GI Reducer Elbow 25 × 20 mm 2.19 GI Reduser Elbow 20 × 15 mm 2.2 GI Reduser Elbow 40 × 32 mm 2.21 GI Reduser Elbow 40 × 25 mm 2.22 GI Reduser Elbow 32 × 20 mm 2.23 GI Tee 32 mm 2.24 GI Tee 25 mm 2.25 GI Tee 20 mm 2.26 GI Tee 15 mm 2.27 GI Tee 40 mm 2.28 GI Reducer Tee 20 × 15 mm 2.29 GI Union 32 mm 2.3 GI Union 25 mm 2.31 GI union 20 mm 2.32 GI union 15 mm 2.33 GI Union 50 mm 2.34 GI Union 40 mm 2.35 GI Nipple 20 × 150 mm 2.36 GI Nipple 20 × 100 mm 2.37 GI Nipple 20 × 75 mm 2.38 GI Nipple 20 × 50 mm 2.39 GI Nipple 15 × 150 mm 2.4 GI Nipple 15 × 100 mm 2.41 GI Nipple 15 × 75 mm 2.42 GI Nipple 32 × 150 mm 2.43 GI Nipple 32 × 100 mm 2.44 GI Nipple 32 × 75 mm 2.45 GI Nipple 25 × 150 mm 2.46 GI Nipple 25 × 100 mm 2.47 GI Nipple 25 × 75 mm 2.48 GI Nipple 25 × 50 mm 2.49 GI Nipple 15 × 50 mm 2.5 GI Nipple 50 × 100 mm 2.51 GI Nipple 50 × 150 mm 2.52 GI Nipple 40 × 100 mm 2.53 GI Nipple 40 × 150 mm 2.54 GI Hexa Nipple 20 mm 2.55 GI Hexa Nipple 15 mm 2.56 GI Long 25 × 150 mm 2.57 GI Long 20 × 150 mm 2.58 GI Long 15 × 150 mm 2.59 GI Long 32 × 150 mm 2.6 GI Long 50 × 150 mm 2.61 GI Long 40 × 150 mm 2.62 Glass Plain 4 mm (6' × 4') 2.63 Glass Plain 5 mm (6' × 4') 2.64 Glass looking mirror 600 × 450 mm 2.65 Glass Frosted 4 mm (6' × 4') 2.66 Glass mirror sheet 6 mm (6' × 4') 2.67 Glass putty 2.68 GI Plug 25 mm 2.69 GI Plug 20 mm 2.7 GI Plug 15 mm 2.71 GI Plug 40 mm 2.72 GI Plug 50 mm 2.73 GI Plug 32 mm 2.74 Glass rubber beeding ( black ) 2.75 Iron Hexa Blade (12" × 1") 2.76 Iron sliding door bolt 250 × 16 mm 2.77 Iron sliding door bolt 300 × 16 mm 2.78 Nut bolt for sliding door (6 × 50) mm (100 in pkt) 2.79 Iron But Hing 125 mm 2.8 Iron But Hing 100 mm 2.81 Iron But Hing 75 mm 2.82 Iron Tower bolt 200 × 10 mm 2.83 Iron Tower bolt 150 × 10 mm 2.84 Iron Tower bolt 100 × 10 mm 2.85 Iron door handle 125 mm 2.86 Iron door handle 100 mm 2.87 Iron Eye hook 100 mm 2.88 Iron Magic Eye 2.89 Iron kunda for sliding door bolt 2.9 Iron window handle L/R 2.91 Iron door spring (Helical) 2.92 Iron cutter blade ( 100 mm dia) 2.93 Iron Nut And Bolt For Sliding Door Bolt 2.94 Iron Haps & Staple 115 mm 2.95 PVC Bib cock 15 mm 2.96 PVC waste pipe 32 mm 2.97 PVC waste pipe 40 mm 2.98 PVC Connection 15 × 450 mm 2.99 Stainless Steel Wire mesh (4' width) 3 WC China Sink 600 × 450 × 300 mm 3.01 Oil Bound Distemper (5 Kg Pack) 3.02 Jk white cement based wall putty 5 kg Pack 3.03 White Cement (1 Kg Pack) 3.04 C.P Spreader 3.05 WC Orissa Pan Seat 580 × 440 mm 3.06 Wash basin 550 × 400 mm 3.07 WC Wash basin (Oval) over the top 550 x 480 3.08 WG EWC Seat 'S' type (Commode) 3.09 EWC pvc Seat cover 3.1 PVC Flushing Cistern 10 Ltr 3.11 PVC Cistern fitting 10 Ltr 3.12 Enamel Paint (Any Colour) 3.13 PVC Bend (Long) 3.14 PVC Urinal Flexible pipe 32 × 150 mm 3.15 PVC Ball for Ball cock 15/20 mm 3.16 PVC Door Silencer 50 mm 3.17 Lime for white wash 1kg 3.18 Marble cutter blade ( 100 mm dia) 3.19 Marble moulding blade ( 100 mm dia) 3.2 Iron cutter Blade 100 mm 3.21 Wood cutter blade ( 100 mm dia) 3.22 Tarpin oil 3.23 PVC syphan washer 3.24 WC China Sink 450 × 300 × 150 mm 3.25 Parliamentory Hinges 3.26 Piano hinger 3.27 PVC. Seat Cover Nob (E.EC) 3.28 Sand paper 3.29 Silicon/Silicon tube 3.3 Silicon Gun 3.31 Steel Hinges (75 mm ) 3.32 Sulation for PVC pipe (100 gram) 3.33 Hand soap dispenser 3.34 S.S hinge 100 mm 3.35 PVC gulli 3.36 GI Check nut 15 mm 3.37 GI Check nut 20 mm 3.38 CEMENT CONCRETE (CAST IN SITU) 3.39 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level : 3.4 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 3.41 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level : 3.42 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources) 3.43 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work at all level : 3.44 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded bricks aggregate 40 mm nominal size derived from natural sources) with available bricks 3.45 MASONRY WORK 3.46 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.47 Cement mortar 1:6 (1 cement : 6 coarse sand) 3.48 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.49 Cement mortar 1:6 (1 cement : 6 coarse sand) with available bricks 3.5 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.51 Cement mortar 1:4 (1 cement :4 coarse sand) 3.52 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all level in all shapes and sizes in : 3.53 Cement mortar 1:4 (1 cement :4 coarse sand) with available bricks 3.54 CLADDING WORK 3.55 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 3.56 WOOD AND P. V. C. WORK 3.57 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 3.58 Sal wood 3.59 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 3.6 Second class teak wood 3.61 35 mm thick 3.62 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 3.63 35 mm thick shutters 3.64 with ISI marked M.S. pressed butt hinges bright finished of required size 3.65 Second class teak wood 3.66 FLOORING 3.67 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 3.68 FINISHING 3.69 Neat cement punning. 3.7 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 3.71 Flush / Ruled/ Struck or weathered pointing 3.72 REPAIRS TO BUILDING 3.73 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin-Charge. 3.74 With cement mortar 1:4 (1cement: 4 coarse sand) 3.75 NEW TECHNOLOGIES AND MATERIALS 3.76 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. 3.77 SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer 3.78 Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. 3.79 25 mm average thickness in 2 layers. 3.8 Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. 3.81 50mm thick in Grade M 25 with cement content not less than 330 kg per cum 3.82 Supplying of ready mixed micro concrete (in pack 25 kg) of make: Rederoc RG (Non-shrink, cementitious micro-concrete). 3.83 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. 3.84 With G.I. barbed wire 3.85 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. comple 3.86 Consumable Material (Electrical) 3.87 Supplying of following piano type switch/ socket complete etc. as required. 3.88 5/6 amp One way Switch 3.89 5/6 amp Two way Switch 3.9 3 pin 5/6 amp socket outlet 3.91 15/16 amp switch 3.92 6 pin 15/16 amp socket outlet 3.93 Fan Regulator socket type 3.94 Telephone socket/ jack outlet 3.95 6A, Bell push switch (Call bell push) 3.96 Supplying of following modular switch/ socket complete etc. as required. 3.97 5/6 amp switch (1 Way, 1 Module) 3.98 2 way 5/6 amp switch (2 Way, 1 Module) 3.99 3 pin 5/6 amp socket outlet (Socket shuttered 6A, 2/3 pin, Universal India 2 Module) 4 15/16 amp switch (1 Way, 1 Module) 4.01 6 pin 15/16 amp socket outlet (Socket shuttered 6/16A, 3 pin, India 2 Module) 4.02 Fan Regulator socket type (Fan step regulator 100 Watts, 2 Module) 4.03 Telephone socket outlet (Telephone Socket RJ11 with Shutter, 1 Module ) 4.04 Bell push, 6A, 1 way, 1 Module 4.05 Blanking Plate (1 Module Blank) 4.06 Supply of modular base & cover plate complete as required. 4.07 White plate 2 Module 4.08 White plate 3 Module 4.09 White plate 4 Module 4.1 White plate 6 Module 4.11 White plate 8 Module 4.12 12 module (White plate 2x6 Module) 4.13 Supplying of following capacity capacitor suitable for ceiling fan etc. 4.14 2.5mfd 4.15 Supplying of 20 / 40 W, 220 V starter for FL. Tube fitting complete as reqd. 4.16 Supplying of 18W/28W electronics ballast , 240V Fl. Lamp complete as reqd. 4.17 Supplying of brass batten/ angle holder complete etc. as required (6 A, brass batten/ angle holder ) 4.18 Supplying of Ceiling rose (6A, Pilot 3 Plate) 4.19 Supply of PVC tape roll 4.2 Supplying of 6 watt LED Slim recess cum surface LED panel as complete as required. 4.21 Supplying of 12 watt LED Slim recess cum surface LED panel as complete as required. 4.22 Supplying of following LED / lamps in existing fitting as complete as required. 4.23 LED Bulbs 10watt 4.24 Supply of LED Tube 20 Watt 4.25 Supply of 100 Watt Bulb 4.26 Supplying of 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required. 4.27 Single pole 6 Amp (SP,6 Amp, C Curve) 4.28 Single pole 10 Amp (SP,10 Amp, C Curve) 4.29 Single pole 16 Amp (SP, 16 Amp, C Curve) 4.3 Single pole 20 Amp (SP, 20Amp, C Curve) 4.31 Single pole 32 Amp (SP, 32 Amp, C Curve) 4.32 Double pole 32 Amp (DP,32 Amp, C Curve) 4.33 Four pole 32 Amp (FP, 32 Amp, C Curve) 4.34 Supplying of 40 to 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required. 4.35 Single pole 40 Amp (SP,40 Amp, C Curve) 4.36 Single pole 63 Amp (SP,63 Amp, C Curve) 4.37 Supplying of 40 to 63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete as required. 4.38 Double pole 40 Amp (DP,40 Amp, C Curve) 4.39 Double pole 63 Amp B(DP,63 Amp, C Curve) 4.4 Four pole 63 Amp 4.41 Supplying of following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 300 mA in the existing MCB DB complete as required. 4.42 DP,40 Amp, RCCB 4.43 DP,63 Amp, RCCB 4.44 Supplying of following rating 3 pin Plug top Complete as required. 4.45 Supply of 5/6 amps, plug top ISI marked 4.46 Supply of 15/16 amps, plug top ISI marked 4.47 Industrial/Metallic top (20 Amp) 4.48 Industrial Socket (20 Amp) 4.49 Supplying of FRLS PVC insulated flexible copper conductor cable. 4.5 1x2.5sqmm 4.51 1x1.5sqmm 4.52 1x4sqmm 4.53 3x2.5sqmm (3 core round conductor) 4.54 3x4sqmm (3 core round conductor) 4.55 3x1.5sqmm (3 core round conductor) 4.56 Supply of 400mm sweep AC 230/250 volts, 50 Hz wall mounting revolving fan with brackets etc compete. 4.57 Supply of AC ceiling fan of following sweep 220 volts without regulator i/c wiring the down rods of standard length up to 30 cm with 1.5 sq.mm. 4.58 Overhauling of celing fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (Excluding Manpower) 4.59 Rewinding of ceiling fans of any size i/c dismantling of rotor cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (Excluding Manpower) 4.6 Rewinding of exhaust fans of any size i/c dismantling cutting the damaged winding and providing rewinding along with insulation paper, varnish, connecting copper leads of suitable quality including dismentling and refixing from normal/abnormal height and refixing as required (Excluding Manpower) 4.61 Overhauling of exhaust fan of any size including dismantling and refixing of fan, bearing, checking, cleaning the all parts and supplying & replacement of rubber real, rubber ring, nut bolts, hanger clamps, bearing plates, cotter/split pin, varnish if required etc. as required complete (Excluding Manpower) 4.62 Cleaning of ceiling fan/wall fan/Exhaust fan with detergent at site (Excluding Manpower) 4.63 Hand gloves Rubber 4.64 Duster 4.65 Material required having life of 12 months 4.66 Foldable Multipurpose Aluminium Super Ladder for Home and Industrial Purpose (12 Feet) 4.67 Emergency Rechargeable LED Torch Light. 4.68 Safety Shoes
|
