Tenders Are Invited For Design And Construction Of The Catchment Station Of The Sewage Treatment Plant In Iń ... in Poland

Work Detail

Execution Of The Foundation For The Container Discharge Station In Accordance With The Station Suppliers Guidelines. Supplying The Water Supply, Process And Electricity Installations To The Location Of The Discharge Station In Accordance With The Recommendations Of The Station Supplier. The Container Sewage Discharge Station Should Consist Of: 1. Container Casing Containing: - Electrical Lighting System - Electrical Heating System - Walls Made Of 100 Mm Thick Sandwich Panels Covered On Both Sides With Acid-Proof Stainless Steel Sheet Acc. With Din 1.4301. Heat Transfer Coefficient: 0.23 W/M2k Door Made Of Acid-Proof Steel Acc. With Din 1.4301 Electric Forced Ventilation System Floor Made Of Aluminum Checker Plate With Din 1.4301 Having: - Color Lcd Touch Screen, Minimum 10 - Control System With Data Archiving And The Ability To Create A Database - Software Based On Windows Embedded - Internal Memory (City, Address) - Ethernet Or Wi-Fi Communication Module - Usb Input - For Data Transfer And Manual Programming Of The Station Modbus Rtu/Tcp Or Profibus Communication Protocol Carrier Identification Module Rfid Keychains 20 Pcs. Sewage Type Identification Module Modular Printer With Paper Cutter Industrial Keyboard Made Of Stainless Steel Other Required Equipment Station:  230V-50Hz Oil Compressor, Minimum 1.5 Kw,  Automatic Rinsing System For Measuring Sensors After Each Sewage Drain,  Measuring And Draining Line With A Diameter Of Dn 100, Made Of Acid-Resistant Steel Acc. Made Of Din 1.4301 With A Wall Thickness Of 2 Mm - Electromagnetic Flowmeter With A Diameter Of Dn 100 - Measuring Vessel With An Element Protecting The Measuring Sensors Against Mechanical Damage - Knife Valve With A Diameter Of Dn 100 Equipped With A Pneumatic Drive - Drain Hose With A Minimum Length Of 3.5 M - Drain Hose Stand Made Of Stainless Steel Acc. With Din 1.4301 Office And Server Software Used To Manage The Drainage Station. 3. Ph And Conductivity Module For The Sink Station In The Form Of A Set Consisting Of: - Two-Channel Ph And Conductivity Transmitter - Ph Electrode Integrated With A Temperature Sensor - Conductivity Sensor Integrated With A Temperature Sensor - Memosens Cables 5 M Long (2 Pcs.) - Non-Contact Measurement In Memosens Technology - A System Resistant To Moisture And Corrosion. The Measured Values ​​Are Digitized And Transmitted To The Measuring Transducer Via A Non-Contact Inductive Connector. 4. Comb Stone Catcher That Stops Impurities Whose Volumetric Weight Is Greater Than The Specific Gravity Of Sewage Discharged To The Discharge Station, I.E. Stones, Concrete Rubble, Metal Elements, Glass And Fibrous Elements. The Device Must Be Additionally Equipped With Heating Elements, An Electronic Thermostat And Thermal Insulation, Which Will Allow The Device To Work Outdoors In The Winter. From Din 1.4307 With A Thickness Of Walls 4 Mm Insulation Thickness 40 Mm External Sheathing Made Of Stainless Steel Sheet Acc. With Din 1.4301 Heating System - Two Silicone Heating Mats With A Power Of 200 W The Device Is Equipped With A Temperature Regulator Equipped With Buttons And A Display. Two Pt100 Temperature Sensors Are Connected To The Regulator. Manhole For Emptying The Stone Catcher: Dn 200 Inspection Hatch: Dn 100 2” Ball Valve For Draining Sewage From The Trap Tank Tank Capacity: 120 L Easily Disassembled Grid For Collecting Fibrous Elements, E.G. Fabrics.5. Computer Set The Set Should Include: - Pc Computer - Lcd Monitor - Mouse And Wireless Keyboard - Installed Program To Operate The Drainage Station. Ińsk (In Place Of The Existing Tank No. 7 According To Fup). A Tank With An Active Capacity Of Vcz = 203 M3, Equipped With 2 Pumps For Pumping Sewage And A Stirrer To Prevent The Sewage From Rotting In The Tank.

Contact Information

Other Detail