|
E-Tender For The Supply Of Furniture At Ernakulam , E-Tender Forsupply Of Furniture At Ernakulam For More Details Refer Tender Documents , Work Station Table (L Shape 2.85 X 1.85 M) Providing & Laying Tables For Assembling And Settingup Four Occupancy Kiosks Shall Be Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood) With 1 Mm Thick Amination Of Selected Colour And Finish Of Approved Shade With 2Mm Pvc Edge Band With Adhesive By Hot Pressing. All The Inside Area Of Box Shall Be Finished With 0.8Mm Thick Lamination Finish All Exposed Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour And Finish. All The Exposed Edges As Well As Any Opening Panels , Shall Be Finished With 2.0 Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Used Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Face Veneers. The Eneers Are Bonded With Phenol Ormaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment With Water Soluble Fixed Type Preservatives Under Vpi Technology Which Ensures Protection Against Borersand Termites. And The Laminates Shall Be Fixed To Plywood Surface With Adhesive By Hot Pressing In A Mechanical Process. Each Table Provided With Openable Side Panels With Suitable Mechanism For Inspecting Utilities And Operating Gas Valves Etc , Work Station Table (L Shape 180 X 1.80 M) Providing & Laying Tables For Assembling And Setting Up Four Occupancy Kiosks Shall Be Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood) With 1 Mm Thick Lamination Of Selected Colour And Finish Of Approved Shade With 2Mm Pvc Edge Band With Adhesive By Hot Pressing. All The Inside Area Of Box Shall Be Finished With 0.8Mm Thick Lamination Finish All Exposed Panels Shall Be Finished With 1 Mm Thick Laminationof Selected Colour And Finish. All The Exposed Edges As Well As Any Opening Panels , Shall Be Finished With 2.0 Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Used Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Face Veneers. The Neers Are Bonded With Phenol Ormaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment With Water Soluble Fixed Type Reservatives Under Vpi Hnology Which Ensures Rotection Against Borers And Termites. And The Laminates Shall Be Fixed To Plywood Surface With Adhesive By Hot Pressing In Amechanical Process. Each Table Provided With Openable Side Panels With Suitable Mechanism For Inspecting Utilities And Operating Gas Valves Etc. , Work Station Table (L Shape 1.85 X 1.70 M)Providing & Laying Tables For Assembling And Setting Up Four Occupancy Kiosks Shall Be Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood) With 1 Mm Thick Lamination Of Selected Colour And Finish Of Approved Shade With 2Mm Pvc Edge Band With Adhesive By Hot Pressing. All The Inside Area Of Box Shall Be Finished With 0.8Mm Thick Lamination Finish All Exposed Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour And Finish. All The Exposed Edges As Well As Any Opening Panels , Shall Be Finished With 2.0 Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Used Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Face Veneers. The Veneers Are Bonded With Phenol Formaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment With Water Soluble Fixed Type Preservatives Under Vpi Technology Which Ensuresrotection Against Borers And Termites. And The Laminates Shall Be Fixed To Plywood Surface With Adhesive By Hot Pressing In A Mechanical Process. Each Table Provided With Openable Side Panels With Suitable Mechanism For Inspecting Utilities And Operating Gas Valves Etc , Work Station Table (L Shape1.80 X 1.85 M) Providing & Laying Tables For Assembling And Setting Up Four Occupancy Kiosks Shall Be Made Out Of 18Mm Thick Bwp Grade (Is: 710Lywood) With 1 Mm Thick Lamination Of Selected Colour And Finish Of Approved Shade With 2Mm Pvc Edge Band With Adhesive By Hot Pressing. All The Inside Area Of Box Shall Be Finished With 0.8Mm Thick Lamination Finish All Exposedpanels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour And Finish. All The Exposed Edges As Well As Any Opening Panels , Shall Be Finished With 2.0 Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Used Shall Be Marine Bwp Grade (Is: 710) It Ismanufactured With Selected Pieces Of Core And Face Veneers. The Veneers Are Bonded With Phenol Formaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment With Water Soluble Fixed Type Preservatives Under Vpi Technology Which Ensures Protection Against Borers And Termites. And The Laminates Shall Be Fixed To Plywood Surface With Adhesive By Hot Pressing In A Mechanical Process. Eachable Provided With Openable Side Panels With Suitable Mechanism For Inspecting Utilities And Operating Gas Valves Etc , Supplying Office Chair (Midback) Providing &Laying Revolving Chair With Arm Rest Seat And Back Cushion Of The Chairs Should Be Pressed On 12Mm Hot Press Moulded Ply The Seatcushion Of The Chair Should Be Made Up Of 50Mmthick High Density Of 45–2 Kg/M3 Polyurethanemould And Back Cushion Should Be Made Up Of 38Mmthick High Density 33–2 Kg/M3. The Polyurethane Foam Shall Be As Per Anufacturer?S Specification. The Hardness Of Foam Shall Be 20 Kg On Ampden Machine And 25% Compression And It Should Be Covered With Fabric As Per Manufacturer?S Shade Card .The Arms Of The Chairs Should Be Black. The Gas Lift Mechanism Should Be Tested As Per Bifma X 05.01.2002 Standards .The Pedestal Should Be Five Legged Injection Moulded In Black 30% Glass ?Filled Nylon And Fitted With 5 Nos Twin Wheel Castors. The Castors Of The Chairs Should Be Glass Filled, Twin Wheel Castors Confirming To Bifma Standards X 05.01.2002 Tested To Perform 1,00,000 Cycles With 225 Lbs Load. It Should Have Synchro Single Point Locking Arrangement. (Note -The Back And Base Of Chair , Supplying Visitor Chair , Supplying Visitor Chair With Arm , Supplying And Fixing Storage Cupboard Providing & Laying Storage Shelves Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood)Plywood Shutters Hinged To Shelves / Carcasses Made Out Of 18Mm Thick Plywood, All The Horizontal Partition / The Storage Cabinet Carcass, Shelves And Shutters Shall Be Made Up Of 18Mm Thick Bwp Grade (Is: 710 Plywood) Plywood However The Back Panel Shall Be Made Out Of 9Mm Thick Plywood. All The Inside Area Of Carcass Shall Be Finished With 0.8Mm Thick White Or Off-White Lamination Finish ,Opening Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colournd Finish. All The Exposed Edges Of Shutter, As Well As Any Opening Panels, Shall Be Inished With 1.0Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Shall Be Marine Bwp Grade (Is: 710) It Is Anufactured With Selected Pieces Of Core And Face Veneers. The Veneers Are Bonded With Phenol Formaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment Withater Soluble Fixed Type Preservatives Under Vpi Technology Which Ensures Protection Against Borers And Termites. And The Laminates Shall Be Fixed To , Supplying And Fixing Storage Cupboard Providing & Laying Storage Shelves Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood)Plywood Shutters Hinged To Shelves / Carcasses Made Out Of 18Mm Thick Plywood, All The Horizontal Partition / The Storage Cabinet Carcass, Shelves And Shutters Shall Be Made Up Of 18Mm Thick Bwp Grade (Is: 710 Plywood) Plywood However The Back Panel Shall Be Made Out Of 9Mm Thick Plywood. All The Inside Area Of Carcass Shall Be Finished With 0.8Mm Thick White Or Off-White Lamination Finish ,Opening Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour And Finish. All The Exposed Edges Of Shutter, As Well As Any Opening Panels, Shall Be Finished With 1.0Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Face Veneers. The Veneers Are Bonded With Phenolaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemicalreatment With Water Soluble Fixed Type Preservatives Under Vpi Technology Which Ensures Protection Against Borers And Termites. And The Laminates Shall Be Fixed To , Supplying And Fixing Storage Cupboard Providing &Laying Storage Shelves Made Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood)Plywood Shutters Hinged To Shelves / Carcasses Made Out Of 18Mm Thick Plywood, All The Horizontal Partition / The Storage Cabinet Carcass, Shelves And Shutters Shall Be Made Up Of 18Mm Thick Bwp Grade (Is: 710 Plywood) Plywood However The Back Panel Shall Be Made Out Of 9Mm Thick Plywood. All The Inside Area Of Carcass Shall Be Finished With 0.8Mm Thick White Or Off-White Lamination Finish ,Opening Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour Andfinish. All The Exposed Edges Of Shutter, As Well As Any Opening Panels, Shall Be Finished With 1.0Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Face Veneers. The Veneers Are Bonded With Phenol Formaldehyde Bwp Grade Resin Under High Temperature And Pressure. With Further Chemical Treatment With Water Soluble Fixed Type Preservatives Under Vpi Technology Which Ensures Protection Against Borers And Termites. And The Laminates Shall Be Fixed To , Supplying And Fixing Storage Cupboard Providing &Laying Storage Shelvesmade Out Of 18Mm Thick Bwp Grade (Is: 710 Plywood)Plywood Shutters Hinged To Shelves / Carcasses Made Out Of 18Mm Thick Plywood, All The Horizontal Partition / The Storage Cabinet Carcass, Shelves And Shutters Shall Be Made Up Of 18Mm Thick Bwp Grade (Is: 710 Plywood) Plywood However The Back Panel Shall Be Made Out Of 9Mm Thick Plywood. All The Inside Area Of Carcass Shall Be Finished With 0.8Mm Thick White Or Off-White Lamination Finish ,Opening Panels Shall Be Finished With 1 Mm Thick Lamination Of Selected Colour And Finish. All The Exposed Edges Of Shutter, As Well As Any Opening Panels, Shall Be Finished With 1.0Mm Pvc Edge Band With Adhesive By Hot Pressing. Plywood Shall Be Marine Bwp Grade (Is: 710) It Is Manufactured With Selected Pieces Of Core And Fac , Providing And Fixing Windows Blinds , Providing Fixing Medium Height Plywood Partition(131 Cm Height ), 70 Mm M Thick With 16Mm 710 Grade Pvc Edgebanded Marine Plywood Of 16Mm X 50 Mm Sections At 400Mm (Horizontal) X 600Mm (Vertical) C/C,Fixed Faced Both Sides With 9Mm Thick Laminated 710 Grade Marine Plywood With Laminated Of Selected Colour And Finish Of Approved Shade . All Internal Frame Members , Providing Fixing Glazed Partition Of 300 Mm Height 8 Mm Thk Toughened Froasted Glass) Above Plywood Partition 1310 Mm From Floor Till 1610 Mm Ht , L Shape Executive Table Size 6X2.5X2.5X&4X2x2.5 Feet Work By 18Mm Laminated Particle Board Including Cupboard , Keyboard, Drawer Lock Handle And Pvc Edge Band Lipping , Steel Computer Table120x60x75cm 20G With Metal Cpu Provision
|
