Tenders Are Invited For Supply, Testing And Commissioning Of One Truck Mounted With Aerial Platform in Mauritius

Work Detail

Tenders Are Invited For Supply, Testing And Commissioning Of One Truck Mounted With Aerial Platform 1 Make Bidder To Specify 2 Model Bidder To Specify 3 Country Of Origin Bidder To Specify 4 Engine 4 Cylinder, Diesel And Water- Cooled Engine Capacity 2900 Cc 3300 Ccturbo Charged Engine 4200 4600 Cc For Naturally Aspirated Engine Payload: 1500 Kg 2500 Kg 5 Steering Right Hand Drive, Power Assisted And Preferably Adjustable 6 Transmission Manual With Five Or More Forward, Reverse 7 Chassis Chassis Shall Be Suitable For Heavy Duty Application. 8 Gross Vehicle Weight 6000 - 7000 Kg 9 Dimensions Overall Length: About 7 - 8 M Overall Width: About 2M Wheelbase: 3300 3500 Mm 10 Speed Limiter To Be Fitted As Per Ntla Regulations And Comply With Bs Au 217 Or Approved Equivalent 11 Power Take Off Pto To Be Actuated From Cabin. Pilot Lamp To Indicate On When Pto Is Actuated. 12 Aerial Platform (I) Factory Built And Factory/Locally Mounted Aerial Telescopic Working Platform With Sub-Frame And Four Adjustable Hydraulic Outriggers Mounted Onto Lorry Chassis And Operated From Independent Control Valve And Levers (Ii) Telescopic Boom With At Least 3600 Rotation Angle (Iii) Front(2) And Rear(2) Outriggers (Iv) Levelling Device For Platform (V) Emergency Hand Pump To Operate The Booms In Case Of Hydraulic System Failure (Vi) Safe Working Height At Least 17 Meters From Ground Level. Basket At Rest Position To Be Located At The Rear Of The Cargo Bed. (Vii) Safe Working Load To Be About 200 Kgs Charts/ Diagrams To Be Submitted Along With Bids (Viii) Basket Rotation At Least +/- 500 (Ix) Duplication Of Controls In Basket (X) Basket To Be Completely Insulated Against Electric Charges (Xi) Appropriate Safety Harness Anchor Points (Minimum 2Nos) To Be Provided In The Basket (Xii) Basket Should Be Fabricated From Moulded Highly Insulated Pvc/Fiber Glass Materials. 13 Brake Dual Circuit, Hydraulic With Vacuum Servo Auxiliary Exhaust Brake Parking Brake Mechanical Type 14 Cabin (I) Factory Fitted Crew Cab With Seating Capacity For Driver + 2 At The Front And 4 Passengers At The Back, All With Seat Belts (Ii) Original Interior And Exterior Rear View Mirrors (Iii) Am/Fm Radio, Heater/Defroster (Iv) Heavy Duty Rubber Mats To Cover Completely The Cabin Floor (V) Tilt Type Preferably * (Vi) Instruction Panel With All Warning Indications (Vii) Air Conditioner 15 Rear Lights Suitably Located, Mounted And Protected With Galvanized Grilles 16 Accessories I) Spare Wheel Suitably Located And Secured On Wheel Carrier For Easy Access And Manipulation. Ii) Appropriate Hydraulic Jack Of About 4T Capacity, Complete With Lever And Wheel Spanner Iii) Warning Triangular Reflectors, Yellow Chalk And Standard Forms. Iv) 2Kg Dry Powder Fire Extinguisher Suitably Mounted Within DriverS Reach As Per Ntla Regulations V) Revolving Beacon Lamp Or Led Flashing Light On Cab With Covered Galvanized Grilles Vi) Rear Warning Sign + Fluorescent Reflective Band As Per Ntla Regulations. Vii) One Set Of Standard Tools Complete With Tool Box Viii) First Aid Box For Seven Persons Appropriately Fixed In Cabin. Ix) Lockable Fuel Tank Cap And Hydraulic Oil Tank Cap Where Applicable. * X) Warning Buzzer For Reverse Gear 17 Guards Front Heavy Duty Original Mud Guards With Mud Flaps As Per Ntla Regulations Rear Heavy Duty Galvanized Mud Guards With Mud Flaps As Per Ntla Regulations. Rear Under Run Protection And Side Guards As Per Ntla Regulations. 18 Rear Body Cargo Box To Be Locally Manufactured Galvanized U Bar Minimum 3X2X1/4 To Be Used For Sub Frame. Side Panels To Be Made Of 2X2 Galvanized Square Tube. Aluminium Sheet 3Mm Thick, Minimum 500Mm High To Be Used For Side Panels And Minimum 4 Mm Checkered Aluminium Sheet For Flooring. Side And Rear Panels To Be Dropdown Opening Type Complete With Heavy Duty Mild Steel Hinges, Pins With Galvanized Retaining Chain. Cargo Box To Be Primed, Undercoated And Flattened Prior To Paint Finish In Top Quality High Gloss White Paint Only Hot Dipped Galvanized Materials To Be Used For Frame. Welded Joints To Be Cold Galvanized A Lockable Storage Compartment For Tools And Materials Of Current And Daily Use To Be Provided In The Locally Manufactured Crew Cabin Rear Cargo Bed. Side Aluminium Anti-Skid Footstep To Be Provided As Access To The Cargo Box. A Lockable Door To Be Provided For The Access The Rear Panel Of The Cargo Bed To Be Painted With Fluorescent Reflective Paint Or Provided With Fluorescent Reflective Stickers As Per Nlta Requirements 19 Drawings Bidder To Submit Detailed Drawings Of Propose Truck Mounted With Aerial Platform 20 Painting Appropriate Etch Primer For Galvanized Material And Undercoat To Be Applied Prior To Finish Colour. Cabin White Chassis- Black 21 Construction All Construction And Installation Works Shall Be Executed According To Good Engineering And Manufacturing Practice And The Truck Mounted Aerial Platform Shall Comply With Ntla Regulations 22 Logo Logo Of Council To Be Painted On 2 Sides Of Cabin Doors. 23 After Sales Service/ Supply Of Spare Parts Bidder Should Submit An Undertaking That They Will Carry Out After Sales Service And That They Will Supply Relevant Spare Parts For 10 Years After Warranty Period. 24 Warranty (I) To Specify General Condition Of Warranty For Vehicle And Aerial Platform. The Minimum Warranty Shall Be One Year. 25 Inspection And Supervision (I) All Construction And Installation Works To Be According To Good Engineering Design And Practice And Vehicle Shall Conform To Nlta Regulations. (Ii) The Truck Mounted With Aerial Platform Shall Be Inspected By A Registered Machinery Inspector As Per Ohsa 2005. 26 Catalogues And Manuals Bidders Shall Submit Original Catalogues/Leaflets Of The Truck Mounted With Aerial Platform And Clearly Specify The Make, Model, Country Of Origin, Warranty Period And Conditions For Both Aerial Platform And Truck. 27. Training Training Should Be Provided To The Representative Of The District Council On The Proper Operation Of The Truck Mounted Aerial Platform By A Trainer. 28 Experience The Proposed Truck Must Have Been Running For At Least 10 Years In Mauritius. (List Of Deliveries To Be Submitted) The Proposed Aerial Platform Must Have Been Operating For At Least 3 Years. 29 Testing And Commissioning The Testing And Commissioning Of The Truck Mounted With Aerial Platform Shall Be Effected By An Independent Registered Mechanical Engineer. Relevant Certificate To Be Submitted Accordingly. 30 Mise En Route Formalities The Truck Mounted With Aerial Platform Should Be Delivered After Completing All Mise En Route Formalities, Viz. Registration, Fitness, Licensing, Excluding Insurance, Etc. 31 Delivery To Be Effected At The Agent. * Bids Must Be Submitted Online On The Eprocurement System At Latest By Thursday 05 May 2022 Up To 13.00 (Local Time). Bidders Who Have Submitted Bids Online By The Closing Date And Time Shall Decrypt And Re-Encrypt Their Bids From Thursday 05 May 2022 From 16.01 Hours Till Friday 06 May 2022 Up To 11.00 Hours. Bids Will Be Opened Online In The Presence Of The Bidders Representatives Who Choose To Attend At The Address Given Hereunder On Friday 06 May 2022 Up To 16.00 Hours At The Council Room (Ground Floor), The District Council Of Grand Port, Royal Road, Rose Belle The District Council Of Grand Port Reserves The Right To Accept Or Reject Any Bid And To Annul The Bidding Process And Reject All Bids At Any Time Prior To Award Of The Contract, Without Thereby Incurring Any Liability To Any Bidder.

Contact Information