|
Ice Axe, Universal Scraper, Material Steel, Length, 1285 Mm, Width, 200 Mm, Handle Diameter, 18 Mm, Frost Resistance, -60 °C, Working Part Width, 200 Mm. The Ice Ax Is Made Of Structural Steel.Powder Coating. The Handle Is Welded To The Canvas For The Reliability Of The Entire Structure, Cable Channel 20 * 10 * 2000 Mm Width - 20 Mm, Depth - 10 Mm, Length - 2000 Mm, Material - Pvc, Installation - Wall, Ceiling, Floor., Three-Way Valve For Pressure Gauge No. 15. Working Medium Water, Steam-Water Mixture;Connection Type: Coupling;Minimum Operating Temperature 20 Degrees;Maximum Operating Temperature 160 Degrees;Body Material Brass;Installation Method: Horizontal/Vertical;Drive Manual;Manual Drive Handle Lever;Color Golden;Tap Diameter 1/2;Connection Type Internal-Internal., Ball Valve No. 15 In/N.• 15 Mm (Corresponds To 1/2 Thread).• Type Of Thread (In/N): On One Side There Is An Internal Thread (Ir), On The Other - An External Thread (Ms).• Material: Brass • Working Pressure (Py / Pn): Usually From 16 To 40 Bar (Atmospheres).• Control Type: Butterfly Handle, Gas Pipe Lever Wrench No. 1.Length - 33 Cm, Width - 6.50 Cm, Depth - 2.50 Cm, Jaw Shape - M., A Set Of Drills For A Hammer Drill. Outer Diameter - 5 Mm - 2 Pcs, 6 Mm - 2 Pcs, 8 Mm - 2 Pcs, 10 Mm - 2 Pcs, 12 Mm - 2 Pcs, Steel Grade - Vk8, Case., Repair Kit For Flush Cistern, Bottom Connection.• Filling Mechanism (Valve) With Bottom Connection (Often A 1/2 Fitting).• Drain Mechanism (Single-Mode Or Dual-Mode With Button).• Fasteners And Sealing Gaskets (Including The Reservoir Ring)., Grease Litol-24 2 Kg, Motor Oil For 4-Stroke Engines 5W-30, Toilet Paper T2, 200 M In A Pack Of 12 Pieces, Used In Toilet Paper Dispensers. Rolled, Waste Paper, Number Of Layers 1, Embossed, Perforated, Diameter 185 Mm, Width 9.5 Cm, Inner Diameter Of The Sleeve 60 Mm, Color White, Compatible With Equipment From Different Manufacturers, Soluble In Water., Universal Tile Adhesive In 25 Kg Bags Is A Dry Mixture Based On Cement, Sand And Polymer Additives For Laying Tiles., Gypsum Plaster 30 Kg - Construction Gypsum (Hemihydrate) With Polymer Additives, Finishing Mixture 25 Kg - Polymer Finishing Putty, Snow Scraper Plastic. 700X530 Mm With U-Shaped Handle. Suitable For Quickly And Efficiently Removing Large Amounts Of Snow In Open Spaces. Advantages: Can Withstand Up To 15 Kg Of Wet Snow;The Engine Bucket Is Made Of Frost-Resistant Composite Plastic, Reinforced With Stiffening Ribs And A 30 Mm U-Shaped Edge Along The Side Of The Bucket With Additional Stiffening Ribs; The Working Edge Of The Bucket Is Protected From Wear And Damage By An Aluminum Strip, Which Is Attached To A Recess On The Bucket And Clamped With Rolled Steel;The U-Shaped Handle Is Made Of Steel, And The “Warm” Pvc Braid Will Allow You To Work In The Cold Without Gloves;The U-Shaped Handle Is Attached To The Engine Bucket With Self-Locking Nuts, Which Eliminates Loosening During Operation;Length 950 Mm And Handle Angle Of 50 Degrees Minimizes The Load On The Back Muscles.Bucket Size: 530 X 700 Mm. Assembled Length: 1450 Mm. Bucket Reinforcement: Aluminum Bar, Stiffening Ribs. Bucket Material: Composite Plastic. Handle Material: Coated Steel. Connection With Handle: Collapsible. Weight: 3.6 Kg., A Dielectric Mat Is A Protective Device That Can Withstand A Test Voltage Of 20 Kv Alternating Current, Frequency 50 Hz. For Use In Closed Electrical Installations (And Even In Open Ones If The Weather Is Dry) With Voltages Above 1000 V. With Anti-Slip Surface. Length 75 Cm, Width 75 Cm, Weight 4.2 Kg, Dielectric Strength Of Insulation Up To 20 Kv., Fireproof Fabric (Blanket) 1.5*2 M, Snow Shovel Hand Tool, Length - 1550 Mm, Bucket Height - 425 Mm, Handle Diameter - 32 Mm, Non-Folding Design, Handle Fastening With Self-Tapping Screws, Bucket Material - Polypropylene, Bar Material - Aluminum Alloy, Handle Material - Hardwood, Bucket Width - 420 Mm
|
