Tenders Are Invited For Construction Of Road Lighting To Improve Technical Parameters Andsafety Of The Munic ... in Poland

Work Detail

The Subject Of The Order Is The Construction Of Road Lighting Constituting Part Of The Cable Line Necessary To Power 7 Lighting Lamps Along With The Foundation And 3 Foundations (Within The Planned Line). The Scope Of The Order Is Part Of The Project And Is Described In The Annex To The Pt As A Graphic Pdf File Called Tender Scope. The Task Is Described In The Financial Annex To The Budget Resolution Entitled Kalina, Plot 45/1.45/2.5176/6 - Design And Construction Of Road Lighting (The Design Part Has Been Implemented). Lighting Poles. Steel Road Lighting Poles With A Height Of 8 M Are Designed. The Poles Will Be Equipped With Izk Fuse Plates, In Which Biwtz 2A Protection Should Be Installed. The Lighting Fixtures Should Be Powered From The Izk Board With A Ydy 3×1.5Mm2 Cable Of Appropriate Length. The Poles Should Be Mounted On A B-150 Type Stabilizing Foundation. The Lighting Poles Should Have The Following Features And Parameters: • Hot-Dip Galvanized According To Pn-En Iso 1461, • Wall Thickness Min. 3 Mm, • Flat Pole Base With A Thickness Of Min. 12-15 Mm, • Size Of The Inspection Recess Min. 100×400 Mm, • Bottom Diameter Of The Pole Min. 160 Mm, Upper 60 Mm, • Door Flush With The Surface Of The Pole, • Inspection Door Closed With One Lock Located In The Upper Part Of The Door, Inside The Recess, The Pole Is Equipped With A Handle For Mounting A Pole Plate, And A Grounding Bracket. Led Lighting Fixture Designs Led Road Lighting Fixtures With A Power Of 39 W, A Luminous Flux Of 4000 Lm And The Color Of The Light Source 740. The Luminaire Will Be Made With The Degree Of Resistance Of The Lampshade To Mechanical Impacts - Ik08, Tightness Of The Optical Chamber - Ip66 And Tightness Of The Accessories Chamber - Ip66; Protection Class Ii Provides Additional Safety. The Luminaires Will Be Mounted On Pole Arms. At The Construction Stage, The Work Must Be Carried Out In Such A Way As To Avoid Damage And Destruction. After Completion Of The Works, Restore The Area To Its Previous Condition, - All Steel Structures And Screw Elements Must Be Protected Against Corrosion By Hot-Dip Galvanizing In Accordance With Pn-En Iso 1461:2011 - All Steel Structural Elements Should Be Permanently Marked With The Manufacturers Mark And Symbols Adopted In Catalogs/Albums - Guidelines For The Foundation Of The Designed Lighting Cable Network, And Commission An As-Built Inventory To An Authorized Entity Geodetic, - Implementation In Accordance With The Technical Description And Industry Agreements. Details Are Included In Pt+Sst

Contact Information