|
Removal Of Floor Coverings In Buildings And Facilities With Aggressive Environment: From Screeds Laid With Mortar (Removal Of Marble And Granite), Making Covers From Marble Slabs, The Number Of Slabs Per 1 M2: Up To 2 Pieces (Replacement Of The Flooring Material With A New One Of Marble, Thickness 30 Mm), Making Covers From Granite Slabs, The Number Of Slabs Per 1 M2: Up To 4 Pieces (Replacement Of Granite Floor Material With A New One, Removal Of Wall Coverings From Pans And Tiles: From Marble (Removal Of Marble From Walls And Tiles), Wall Cladding With 25 Mm Thick Marble Or Travertine (Polished) Tiles, Number Of Tiles Per 1 M2: Up To 4 (Replacement Of Wall Material With New Marble Thickness 30 Mm), Covering The Upper Part Of The Parapet With Polished Granite Tiles With A Thickness Of 40-60 Mm, The Number Of Tiles Per 1 M2: Up To 4 (Replacing The Marble Cap On The Wall With A New One, Thickness 80 Mm), Construction Of Air-Permeable Facades, Facing With Panels From Composite Materials: Without Thermal Insulation Layer (Removal Of Aluminum Composite Panel On The Ceiling), Facing With Panels Of Composite Materials: Without Thermal Insulation Layer (Replacement Of Aluminum Composite Panel On The Ceiling With A New One), Installation Of An Escalator With A Lifting Height Of 15 M, Including: Preparatory Work (Dismantling Of The Escalator), Including: Preparatory Works, Building Exterior Escalator With Rise Height 5200 Mm, Inclination Angle 35°, Step Width 800 Mm, Designed To Work Fully Outdoors, In Harsh Climate Conditions, -40 / +72 Degrees And 95% Relative Humidity, In Accordance With En 115-1 And (Eu) (2023/1230) European Norms, Equipped With Ip Protection Class According To Iec 60529 Standards, Vertical Chain Elevators With Chain, Width 250 Mm, Height Of The Elevator, M: 10 (Dismantling Of Existing Disabled Platforms), M: 10 (Installation Of New Disabled Platforms), Climbing Height 5200 Mm, Load Capacity Minimum 250 Kg, Platform Size Minimum 1000×800 Mm, Speed Minimum 0.11 M/S, According To En 81-40 And (Eu) (2023/1230) European Standards, Designed For Outdoor Use, With Stainless Steel Guide Rail And Support, 220-240 V / 50 Hz Single-Phase Network Powered, With A Control Voltage Of 24 V Dc, Automatic Opening And Closing Safety Arms (Protective Bars), Folding Platform, Obstacle Detection Sensors, Emergency Stop Button, Sound Signal And Emergency Lowering Function In Case Of Power Failure, Equipped With Ergonomic Control Buttons On The Platform And Floor (Station) Call Buttons, Excavator-Loaded Construction Waste With A Bucket Capacity Of Up To 0.5 M3: Loading
|