|
Navigation Tester Ifr-6001. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Navigation Tester Ifr-600 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Control Panel Diss-032 Erp4-001 Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Control Panel Diss-032 Erp4-001 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Control And Testing Equipment Of The Ivd Unit In The Amount Of 2 Units Of Measuring Instruments1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Ivd Control And Testing Equipment For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Small-Sized Simulator Of Beacons Mim-70 In The Amount Of 2 Units Of Measuring Instruments 1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Small-Sized Beacon Simulator Mim-70 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. When Accepted For Repair, The Completeness And General Technical Condition Of The Measuring Instrument, The Availability And Correctness Of Documentation For It Are Checked., Verification Of Measuring Instruments Pkd Rangefinder Control Device Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si “Pkd Rangefinder Control Device” For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Pressure Meter Nmp-100 Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Pressure Meter Nmp-100 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Lim-70 Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Laboratory Simulator Of Beacons Lim-70 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Of The In-11 Strain Gauge In The Amount Of 4 Units Of Measuring Instruments 1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Pulse Generator G5-60 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It.The Device Is Designed To Check The Tension Of Various Aircraft Control Cables., Verification Of Measuring Instruments Upg-48 Installation 1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Upg-48 Installation For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Lever-Gear Indicator Irb-001 1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Lever-Gear Indicator Irb-001 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It.The Device Is Designed To Check The Backlash Of The Roller Forks Of The Thrust Of The Rotor Blades., Verification Of Measuring Instruments Power Meter Mz-561. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Measuring Instrument “Power Meter Mz-56” For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It.The Device Is Intended For Measuring The Average Power Values Of Continuous Microwave Signals In Coaxial Paths (Used On The Diss-15 Stand)., Inspection Of Measuring Instrument Generator G2-37 2 Pieces Of Measuring Instrument 1. Measuring Devices Must Be Checked By Representatives Of The State Metrological Service Or Authorized Representatives With Metrological Accreditation On The Basis Of The Methodological Book And In Accordance With The Law Of The Republic Of Kazakhstan N53-Ii Of June 7, 2000. 2. The Contractor Must Have Complete Documents On Accreditation Inspection And The Equipped Inspection Laboratory Must Be Owned By The Republic Of Kazakhstan. 3. The Contractor Must Check And Repair Measuring Devices In A Timely And Qualitative Manner4. Testing Of Measuring Devices Is Performed By The Contractor. 5. The Contractor Must Provide The Necessary Funds For Quality Control Of Measuring Devices. 6. Inspection Of Measuring Devices Should Be Carried Out In Accordance With The Main Law Of The Republic Of Kazakhstan On Technical Examination And Measurement Unit During The Inspection, And Should Be Modern.7. When The Contractor Performs Inspection Work On Measuring Devices, The Contractor Must Have The Following Documents: Certificate Of Inspection, Act Of Work Performed, And A Stamp Identifying The Measuring Devices. 8. According To The Instructions Of Metrological Supply, It Is Necessary To Observe The Periodic Interval Of Measuring Devices For Effective Operation. Therefore, The Interval Between The Inspection Time Should Be Observed.9. Generator G2-37 Must Be Delivered And Returned To The Place Of Inspection Of The Measuring Device In Special Boxes By Railway, Aircraft And Truck Under The Authority Of The Performer. After The Completion Of Repair Work, The Acceptance Process Requires The Inspection Of Measuring Devices And The Filling Of Documents. The Purpose Of The Tool Is To Regenerate The Low-Purity Voice Signal Using The Yadro Type Radio Station In The Kv Band Stand., Verification Of Measuring Instruments Pulse Generator G5-60 1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Pulse Generator G5-60 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Of Measuring Instruments Metal Ruler 0-150Mm1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Metal Ruler 0-150Mm For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Calibration Combined Device For Measuring Light And Color Characteristics Ls-150 1 Koica Minolta1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of Ls -150 1 Koica Minolta For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Calibration Of Measuring Instruments Device For Calibration Of Charge-Discharge Stands Pg Ul -101 Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Calibrating Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The Si Device For Calibration Of Charge-Discharge Stands Pg Ul -10 For Verification And Back Will Be Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Dc Test Meter - Mfr1 Insulation And Tanker Probe Testing. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of The “Dc Test And Measuring Device - Testing Of Insulation And Tanker Probe Mfr” For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Verification Test Equipment For Insulation Systems Mit 4201. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of Test Equipment For Insulation Systems Mit 420 For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Calibration Set Of Test Instruments Mps For Aircraft 27С/235/29 5-21. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of “27C/235/29 5-2” For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. Upon Acceptance For Repair, Completeness And General Technical Requirements Are Checked. The State Of The Measuring Instrument, The Availability And Correctness Of Documentation For It., Calibration Of Theodolite Aerological 2 Asht1. Verification Of Measuring Instruments Is Carried Out By Verifiers Of The State Metrological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology For Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Dated June 7, 2000 N53-Ii2. The Contractor Must Have A Document Confirming The Accreditation Of The Calibration Laboratory On The Territory Of The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Bear Responsibility For The Timely And High-Quality Provision Of Services For Verification Of Measuring Instruments.4. Verification Of Measuring Instruments Is Carried Out By The Contractor’S Forces And Means. 5. The Contractor Is Obliged To Pay All Necessary Expenses Associated With The Verification Of Measuring Instruments For The Timely And High-Quality Provision Of Services.6. When Carrying Out Verification Of Measuring Instruments, Equipment Must Be Used That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring The Uniformity Of Measurements. 7. Verification Of Measuring Instruments Is Carried Out Entirely By The Contractor, With The Preparation Of Reports Of Services Rendered; Based On The Results Of Verification, The Measuring Instruments Are Certified By A Stamp Imprint And A Certificate Of Verification Of The Measuring Instruments.8. According To The Instructions For Metrological Support, Measuring Instruments And Control And Verification Equipment, The Time (Between Verification) Interval Must Be Maintained For Optimal Operation Of The Measuring Instruments, In This Regard, The Service (Verification, Repair) Must Be Carried Out In Stages. 9. Delivery Of Aerological Theodolite 2 Asht For Verification And Back Is Carried Out By The Contractor, By Rail, Air Or Road Transport In Special Containers. When Accepted For Repair, The Completeness And General Technical Condition Of The Measuring Instrument, The Presence And Correctness Of Documentation For It Are Checked.
|
