Request For Quotation Purchase Of Goods And Equipment For The Unmanned Aircraft Systems Class And Laboratory in Kazakhstan

Work Detail

Heat Resistant Silicone Soldering Mat (Large): Material Is High Quality Heat Resistant Silicone (Organic), Anti-Static/Non-Conductive, Non-Toxic, Flexible And Durable; Working Surface Size From 480×318 Mm To 550×350 Mm (≈48×31.8…55×35 Cm); Thickness ≈3…5 Mm; Heat Resistance Up To ≈500 °C (≈932 °F); Surface With Sections/Cells For Small Parts, Built-In Metric Ruler ~0–36 Cm, Magnetic Zones/Cells For Screws; Anti-Slip Texture, Resistant To Solder Drops, Heat And Scratches, Easy To Clean; Suitable For Soldering Circuit Boards And Repairing Electronics, Smartphones, Laptops, Drones, Etc.; Set - 1× Silicone Heat-Resistant Mat (Accessories May Include Magnetic Compartments/Drawers On Selected Models)., Fpv Timing Gate / Lap Sensor Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Diesel Power Station 10 Kw, Diesel Power Station Is Designed For Autonomous Or Backup Power Supply. Rated Power Is About 10 Kw (Approximately 10–12.5 Kva). Operating Voltage -230 V (1 Phase) Or 230/400 V (3 Phases) At A Frequency Of 50 Hz, Power Factor Cosϕ ≈ 0.8–1.0.The Unit Is Equipped With A 4-Stroke Diesel Engine With Air Or Liquid Cooling And An Electric Starter. Fuel Tank - Up To 200 L, Fuel Consumption At Full Load Is Approximately 3.2–4.2 L/H. Noise Level Is About 50–80 Db(A) At A Distance Of 7 M.The Station Is Equipped With A Protection System (Stop At Low Oil Pressure And Overheating), An Automatic Voltage Regulator Avr And A Brushless Generator (Brushless/Pmg). The Panel Contains Sockets, Circuit Breakers, A Voltmeter And An Ammeter.The Weight Of The Installation Is Approximately 170–456 Kg, Dimensions Are From 720X550x620 Mm To 1500X700x1300 Mm. Execution Is Possible On A Frame, In A Noise-Proof Casing Or Container, With The Options Of Ats, Control Panel And Remote Start. Quantity Requirements: 1 Set. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Multimeter, Multimeter - 1 Pc., Is Designed To Measure Electrical Parameters And Monitor The Condition Of Connections In Electrical Circuits, As Well As To Identify Wiring Damage And Open Circuits. The Measurement Range Of Alternating Voltage Is 200 Mv - 600 V With An Error Of About ±1.2%, Direct Voltage - 200 Mv - 600 V With An Error Of About ±0.5%. Dc Current Measurement Is Carried Out In The Range Of 200 Μa - 10 A With An Error Of Approximately ±1.0%. The Resistance Measurement Function Provides A Range Of Up To 20,000 Ohms With An Accuracy Of Approximately ±0.8%, Which Allows You To Diagnose Electrical Circuits And Connections.Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Set Of Cordless Screwdrivers, Set Of Cordless Screwdrivers (Thin And More Powerful) Is Designed For Installation, Repair And Assembly Work With Various Fasteners.The Thin Screwdriver Is Equipped With A Li-Ion Battery With A Capacity Of About 2 Ah With A Nominal Voltage Of 3.6–4 V. The Maximum Torque Is Approximately 4–6 Nm, The Idle Speed Is 200–250 Rpm. The Tool Is Equipped With A Standard 1/4″ Hex Bit Holder And Supports Charging Via Usb-C, Which Ensures Convenient And Compact Use.A More Powerful Screwdriver Also Runs On A Li-Ion Battery With A Capacity Of About 2–3 Ah With A Voltage Of 3.6–4 V. The Maximum Torque Reaches 8–12 Nm, Rotation Speed Is 300–400 Rpm. The Design Includes A 1/4″ Hex Bit Holder And Mechanical Torque Adjustment For More Precise Work.The Delivery Set Includes: 2 Cordless Screwdrivers (Thin And More Powerful), A Set Of Bits (Approximately 20–40 Pcs.) Types Ph, Sl, Torx, Hex, 2 Usb-C Cables For Charging, Batteries (Built-In Or Replaceable), A Case Or Organizer For Storage, As Well As User Instructions And Packaging. Quantity Requirements: 4 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Dvr Fpv Goggles, Compact Fpv Goggles With Recording Capability And Wide Viewing Angle. Fpv Goggles Digital, Display -1080P (Full Hd), Viewing Angle 50-54C, Refresh Rate Up To 60-100 Ghz, Latency 30-50 M/S, Video System No Less Than Dji Oz (Compatible With Digital Fpv Drones), Transmission Range Up To 10 Km (In Ideal Conditions), Frequencies 2.4/5.8 Ghz, Built-In Antennas (2 Pcs), Power From A Battery (External Or Built-In Depending On The Kit), Operating Time 2-3 Hours, Video Recording Via A Connected Unit/Drone, Usb-C Interfaces, Diopter Adjustment, Weight 400-600 G. Quantity Requirements: 5 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Signal Receiver, Compact Modules/Boxes For Receiving 5.8Ghz Video Signal From A Drone, Support 40+ Channels (Raceband/Standard), High Sensitivity, Low Noise Amplification (Lna), Sma/Rp‑Sma Connectors For Antennas, 5–12V Power Supply, Digital Or Analog Frequency Display, Compatible With Fpv Goggles/Monitors; Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Antenna Signal Splitter, Distributes 5.8Ghz Signal (Fpv/Vtx/Rx), Impedance 50Ω, Split Factor 1→2 / 1→4 (One Input → Two/Four Outputs), Attenuation Coefficient ~3Db (Per Channel), Low Loss, Corrosion-Resistant Housing, Sma/Sma Or Rp‑Sma Connectors, Suitable For Connection Multiple Antennas/Receivers, Improves Fpv Video Signal Stability In Racing; The Package Includes The Separator Itself With Connectors And Adapters For The Required Type Of Connectors.Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Tape Measure 3 M, Tape Length 3 M; Tape Width ≈16 Mm; Metric Scale; Housing Abs/Tpr Plastic (Rubber-Coated); Tape Material - Steel With Nylon Coating; Accuracy Class Ii; Magnetic/Movable Hook At The End; Auto-Stop Tape Fixation; Weight ≈0.14–0.17 Kg; Delivery Set: 3 M Tape Measure (1 Piece), Strap/Latch (Depending On The Model), Documentation (Instructions/Warranty Card)Quantity Requirements: 3 Pieces. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Measuring Tape 5 M: Tape Length 5 M; Tape Width ≈19–25 Mm; Housing Abs Plastic / Abs+Tpr Rubberized; Tape Material: Steel (Often Nylon-Coated); Accuracy Class Ii; Scale Pitch 1 Mm, Metric Scale (In Some Models Double-Sided With Inches); Magnetic/Movable Hook At The End (Depending On Model); Hitchhiking Tape Fixation; Weight ≈0.2-0.3 Kg; Delivery Set: 5 M Tape Measure (1 Piece), Strap/Clip, Documentation/Warranty Cardquantity Requirements: 3 Pieces. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. . The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Measuring Tape 10M: Tape Length 10M; Tape Width ≈25–27Mm; Abs/Tpr Rubberized Housing; Steel Tape With Nylon Coating; Metric Scale With 1Mm Graduations; Accuracy Class Ii; Movable/Magnetic Hook At The End; Auto-Stop Tape Fixation; Spring Return; Anti Reverse Tape Coating; Weight ≈0.4–0.6Kg; Delivery Set: 10M Tape Measure (1 Piece), Strap/Belt Clip (If Provided), Packaging, Warranty Card/Instructions. Quantity Requirements: 3 Pieces. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Servo Tester, Digital Servo Tester - 1 Pc., Designed For Diagnostics, Configuration And Functional Testing Of Servos, As Well As Electronic Speed Controllers (Esc) As Part Of Electronic And Robotic Systems. The Device Provides The Generation Of A Control Signal Necessary For The Correct Operation Of Servomechanisms And Allows You To Quickly Check Their Performance Without The Use Of An Additional Controller Or Specialized Software.The Device Is Powered From A Constant Voltage Source In The Range Of 4.8–6 V, Which Corresponds To The Standard Power Parameters Of Most Model And Robotic Servos.The Design Of The Device Provides The Ability To Change The Frequency Of The Output Control Signal Using The Pulse Width Functional Button, Which Allows You To Switch Signal Generation Modes With A Frequency Of 50 Hz, 125 Hz And 250 Hz Depending On The Requirements Of The Equipment Under Test.To Expand Functionality, The Device Is Equipped With Three Main Operating Modes, Switchable Using The Select Button:Manual Mode; Neutral Mode; Automatic Mode. Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Table For 3D Printer, Rigid Working Platform Made Of Steel/Aluminum + Laminated Chipboard/Mdf Table Top 18–25 Mm Thick, Stable Metal Legs With Height Adjustment ≈700–950 Mm, Surface Dimensions ≈1200×600–1800×800 Mm (L×W), Load-Bearing Capacity ≥150 Kg, Anti-Vibration Design (Reinforced Ribs, Mounting Angles) To Minimize Vibrations From The Printer During Operation, Surface With A Protective Coating (Powder Painting/Laminate), Holes/Channels For Cable Management, Shelves/Drawers For Storing Filament And Tools, The Ability To Attach Accessories (Desk Lamp, Spool Holder, Organizers), Adjustable Supports/Levels For Level Installation On Uneven Surfaces, A Set Of Fasteners And Assembly Instructions. Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Third Hand, The Device Is A Holder-Stand For Soldering And Installation Work With A Weighted Metal Base For Stability. The Body Is Made Of Metal And Abs Plastic. The Design Is Equipped With A Glass Lens With A Diameter Of About 65–90 Mm With A Magnification Of ×2.5–×3, Some Models Additionally Provide Lenses Of ×7.5–×12.To Work In Low Light Conditions, Led Backlighting (2–5 Leds) Is Provided, Powered By 3 Aaa/Aa Batteries Or Via Usb/Adapter (Depending On The Model).The Device Is Also Equipped With Two Alligator Clips On Flexible Holders, A Holder For A Soldering Iron And The Ability To Adjust The Position Of The Lens And Clamps. The Kit May Include A Solder Stand, Packaging And Instructions.Quantity Requirements: 3 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Milling Machine, A Universal Vertical-Horizontal Turret Milling Machine Is Designed To Perform Various Milling Operations When Processing Metal Workpieces. The Work Table Has Dimensions Of Approximately 1270 × 254 Mm And Is Equipped With 3 T-Shaped Slots Approximately 16 Mm Wide With A Pitch Of Approximately 65 Mm, Which Ensures Convenient Fastening Of Workpieces And Equipment.Movements Along The Axes Are Approximately: X - 780–850 Mm, Y — 380–410 Mm, Z — 380–400 Mm. The Spindle Stroke (Quill) Is About 127 Mm. The Machine Can Be Equipped With A Spindle With An R8, Iso/Nt30 Or Iso/Nt40 Taper.The Spindle Speed Range Is Adjustable In Steps - From Approximately 60–70 To 4500–4600 Rpm. The Spindle Motor Power Is About 2.2–3.0 Kw. The Milling Head Can Rotate ±90° And Tilt ±45°, Which Expands Processing Capabilities.The Weight Of The Machine Is 1200–1500 Kg, Overall Dimensions Are Approximately 1700 × 1800 × 2300 Mm, Which Ensures The Stability And Accuracy Of The Equipment Quantity Requirements: 1 Sets. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026., Jigsaw Machine. The Drive Type Of The Machine Is Electric, Providing Reciprocating Motion Of The Saw Blade, Designed To Perform Precise Cuts Of Various Materials. The Stroke Of The Saw Is Approximately 10–20 Mm, Which Determines The Amplitude Of Its Movement Up And Down During Operation.The Maximum Cutting Height (Thickness Of The Material Being Processed) Is About 40–60 Mm, Depending On The Type Of Material And Blade Used. The Cutting Depth Is Determined By The Distance From The Saw To The Throat Of The Machine And Is Usually In The Range Of 250–500 Mm, Which Allows Processing Fairly Wide Workpieces.The Speed Of The Machine Is Adjustable In The Range From Approximately 400 To 1600 Double Strokes Per Minute, Which Makes It Possible To Select The Optimal Cutting Mode For Various Materials And Types Of Work.Quantity Requirements: 1 Set. Delivery Time: Within 30 Calendar Days From The Date Of Signing The Contract.Place Of Delivery: Almaty, Turksiybsky District, Krasnogorskaya Street 8. When Transferring To The Customer, Provide Invoices In 3 Copies Along With The Goods.Warranty For Supplied Goods Is 12 Months. In Case Of Breakdown Or Malfunction Of The Provided Product. The Supplier Undertakes To Replace Them With Similar And Serviceable Ones Within 15 Calendar Days. The Storage Period For The Goods Provided In Warehouses Should Not Exceed 12 Months. The Product Should Not Expire In 2026.

Contact Information