|
Tender for 01/Supply Installation And Commissioning Of Electric Incinerator For Large Animals , Niwai , Works , Supply Installation And Commissioning Of Electric Incinerator For Cows, Bulls And BuffaloS As Per Enclosed Specification. Burning Rate 800 To 1000 Kg/Hr. With Primary And Secondary Chamber, 02-Ton Capacity Hydraulic Lifter Crane To Lifting Animal From Vehicles Slings And Structural Support. Chimney Work 30 M Tall Bottom Dia. 1200 Mm And Tap Dia 450Mm Selfsupported M.S Fabricated Chimney Along With Its Platform, Ladder, Earthing, Foundation M25 Grade With Foundation Bolt Earthing Etc. Supply And Installation Of Vertical Scrubber Unit With Pump And Spray Nozzle Ss 304 Grade. , Technical Data Acquisition With Plc Control Showing Measure Of Unit Consumption , Duration Of Running Of Machine And No.Of Burning Dead Bodies With Date And Time. , Operation And Maintenance Works For 1 Year Of Above Work Ass Per Pmc Rule Like Min Wages Act, Pf,Esic,Bonus To Operator. ( One Operator And 2 Helper) , Works , Earth Work In Excavation In Foundation, Trenches Etc. Including Dressing Of Sides And Ramming Of Bottoms, Including Getting Out The Excavated Material, Refilling After Laying Pipe/ Foundation And Disposal Of Surplus Excavated Material At A Lead Upto 50M Suitable Site As Per Direction Of Engineer For Following Depths, Below Natural Ground / Road Top Level.In All Types Soils/ Saturated Soil Such As Moorum, Sand, Sandy Silt, Clay, Black Cotton Soil, Kankar, Etc.Depth Upto 1.5 M , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level : 1:4:8 (1 Cement : 4 Fine/ Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). , Random Rubble Masonry With Hard Stone In Foundation And Plinth :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Two Stories In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 , Reinforcement For Reinforced Cement Concrete Work At All Levels Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete. Thermo-Mechanically Treated Bars , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Upto Two Stories Excluding Cost Of Centring, Shuttering, Finishing And Reinforcement : Including Providing /Mixing Of Synthetic Fibers Compulsorily Complying With Is 16481:2022 Of 06 Mm/12 Mm Length To Be Mixed @ 0.25% By Weight Of Cement I.E. 125 Gms Per 50 Kg Cement Up To 900 Gms Per Cum Of Concrete/ Mortar. 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Steel Work Welded In Built Up Sections/ Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. , Supplying And Fixing Of Gi Chain Link Fencing Of Required Width In Mesh Including Strengthening With 2 Mm Dia Gi Wire/ G.I. Staples/ G.I.U-Nails/ Nuts Bolts With 2.4 M Angle Iron Posts 50 Mm X 50 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete 30Cmx30cmx60cm, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only Etc Complete As Required And As Per Direction Of Engineer-In-Charge. Mesh Size 50Mm X 50Mm Made Of Gi Wire 3.15Mm Dia , Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : New Work (Two Or More Coats) Including A Coat Of Approved Steel Primer But Excluding A Coat Of Mordant Solution. , Cement Plastering Including T&P, Scaffolding, Material And Complete Labour, Including Cost Of Water, Curing, Racking Of Joints Etc. With 12 Mm Cement Plaster Of Mix : Including Providing /Mixing Of Synthetic Fibers Compulsorily Complying With Is 16481:2022 Of 06 Mm/12 Mm Length To Be Mixed @ 0.25% By Weight Of Cement I.E. 125 Gms Per 50 Kg Cement Up To 900 Gms Per Cum Of Concrete/ Mortar 1:6 (1 Cement : 6 Fine/ Coarse Sand) , Cement Plastering Including T&P, Scaffolding, Material And Complete Labour, Including Cost Of Water, Curing, Racking Of Joints Etc. With 20 Mm Cement Plaster Of Mix : Including Providing /Mixing Of Synthetic Fibers Compulsorily Complying With Is 16481:2022 Of 06 Mm/12 Mm Length To Be Mixed @ 0.25% By Weight Of Cement I.E. 125 Gms Per 50 Kg Cement Up To 900 Gms Per Cum Of Concrete/ Mortar 1:4 (1 Cement : 4 Fine/ Coarse Sand) , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm). , Construction Of Embankment With Approved Material Obtained From Borrow Pit With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacting By Vibratory Roller 8-10 Tonne To Meet Requirement Of Table 300-2 Including Cost Of Compensation For Earth Taken From Private Land Complete As Per Mort&H Specification Clause 305. (Lead Taken Upto 5 Km) , Random Rubble Dry Stone Kharanja (Soling) Under Floor. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing Corrugated G.S. Sheet Roofing Including Vertical/ Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275Gm/M²
|
