Tenders Are Invited For Purchase Of A Complete System Of Inflatable Energy-Absorbing Bands in Poland

Work Detail

The Subject Of The Order Is The Purchase Of A Complete System Of Inflatable Energy-Absorbing Bands For The Stadium. Alfred Smoczyk In Leszno In Accordance With The Requirements Specified In The Description Of The Subject Matter Of The Order (Opz) Constituting Annex No. 1A To The Swz. Description Of The Subject Of The Order: 2.1.The Pneumatic Band Must Consist Of Identical Segments With The Following Dimensions: - Height (Measured From The Elevation Of The Speedway Track Surface To The Upper Edge Of The Pneumatic Band): From 1.2 M To 1.4 M - Width: From 0.80 M To 1.0 M - Length: From 3.0 M To 5.5 M2.2.The Set Must Consist Of All The Necessary Elements Constituting A Complete System: - Complete Length Of The Pneumatic Band - 298.2 M - Standard Elements Of The Pneumatic Band - Quantity Adjusted According To The Above. Length Of The Pneumatic Barrier And Length Of The Track - Elements Of The Pneumatic Barrier, Entrance Gate - 2 Pcs. - Elements Of The Pneumatic Barrier, Entry And Exit Triangles - 6 Pcs. - Power Supply Electric Blower - 5 Pcs. - Set Of Elements For Assembly (Hooks, Fastenings, Etc.) - 1 Set - Cover Covering The Pneumatic Barrier Along The Entire Length And Width Of The Barrier (Training And Protection Against Bad Weather Conditions), Width: 2.75 M - 1 Set - Spare Elements Of The Pneumatic Band Intended For Replacing Damaged Modules Mounted On Curved Sections Of The Speedway Track, With Dimensions Consistent With The Standard Elements (Spare Equipment Must Be Compatible And Have Parameters Enabling Proper Operation Of The Pneumatic Band) - 4 Pcs. 2.3.The Pneumatic Band Must Be From Current Production No Older Than 2026.2.4.The Apd A Plus+ Type Pneumatic Band Must Have Fim (International Motorcycle Federation) Type A+ Approval For A Minimum Period Of 5 Years From The Date Of Receipt Of The Subject Of The Order.2.5.The Pneumatic Band Must Comply With The Rules And Regulations Of The Fim (Standards For Tracks For Track Racing - Strc), Pzm (Track Regulations For Motorcycle Speedway Competitions).2.6.The Pneumatic Band Must Be Approved For Use During The Speedway Grand Prix, Speedway World Cup, Speedway Of Nations And Speedway European Championship. 2.7.The Pneumatic Band Must Enable The Attachment Of Advertising Banners (At Least 0.95 M High) With Velcro On Its Entire Surface From The Speedway Track Side - Applies To Each Delivered Element.2.8.The Overlap Connecting The Elements Of The Pneumatic Band Must Be At Least 20 Cm Wide And Have At Least 20 Cm Of Velcro Along The Entire Height Of The Element.2.9.The Pneumatic Band Must Be Made Of Fire-Resistant Pvc Material With A Combination Of Two Colors: Yellow And Blue (It Cannot Be Painted Material).2.10.All Materials Constituting Apd Must Be Fire Resistant.2.11.The Kickboard Of A Pneumatic Band Must Be At Least 40 Cm High And Made Of Rubber Material (Certified By The Manufacturer) With The Following Minimum Properties: - Thickness: Min. 3.0 +/- 0.2 Mm- Hardness: Min. 85 +/- 5 Sha- Tensile Stre

Contact Information