Tenders Are Invited For Contracting For The Construction Of A New Well For The Supply Of Drinking Water In T ... in Spain

Work Detail

Contracting For The Construction Of A New Well For The Supply Of Drinking Water In The Center Of Alàs.The Drilling Is Planned To Be Done With A Rotopercussion System At A Depth Of 120 Meters:- First 10 Meters Drilling With A Diameter Of 312Mm And Dacer Tubing With A Diameter Of 260Mm And A Thickness Of 6Mm.- Next 110 Meters Drilling With A Diameter Of 250Mm With A Dacer Tubing With A Diameter Of 210Mm And A Thickness Of 5Mm (The Last 18 Meters Will Be With Grooved Pipe For Water Filtration). A 15 M Gravity Ring Foundation Will Be Made. It Is Also Planned To Clean The Well With Compressed Air. The Next Step Will Be Drilling The Well For 24 Hours, For This It Will Use A Team With The Capacity To Drive 10 M3/Ha 120 M, With Flow And Level Control. It Is Also Expected To Control The Recovery Of The Well And Execute The Corresponding Final Report. Once The Well Has Been Measured And Having Verified That The Volume Obtained Is Sufficient For The Demand For Volume, A Complete Analysis Of Extracted Water Will Be Carried Out, According To The Specifications Of Rd 3/2023, Of January 10, Which Establishes The Technical And Sanitary Criteria For The Quality Of Drinking Water, Its Control And Supply. A Box With Internal Dimensions Of 1M Will Be Placed At The Top Of The Well X2m, Elevated From The Land 1M, Which Will Also House The Electric Panel Of The Pump And The Remote Control Box. This Casket Will Be Placed On A Reinforced Concrete Slab Of 3M X 2M And 0.25M Thick. A Well Protection Perimeter Of 8.4 X 7.4 M Is Foreseen.

Contact Information