Supply Of Complete probing solution compatible with the existing CNC machine setup. in India

Work Detail

Supply Of complete probing solution compatible with the existing cnc machine setup. , supply, installation, integration, and functional testing of a complete probing solution compa ible with the existing cnc machine setup. the scope includes: (1) probe kit (including probe, transmitter wi th batteries). (2) receiver unit. (3) connecting cables and essential accessories. (4) all required probing sof tware/programming cycles. (5) modifications to existing nc/plc programs to accommodate the probing sys tem if required. (6) functional testing and training. technical specifications:- (1) transmission technology = 2.4 ghz wireless with interference-resistant spread spectrum technology (fhss or dsss). (2) communic ation range (probe to receiver) = minimum 15 meters. (3) applications supported = part detection (includi ng axle length), centering and alignment detection etc. (4) input signal range = 13.5v to 30v dc. (5) outp ut signal specification = 4v to 30v dc, 40 ma. (6) repeatability = not more than 1.0 micro meters (2s); be tter repeatability preferred. (7) trigger/measurement force (xy plane) = not more than 0.75 to 2.0 n. (8) m inimum distance between units = minimum 0.5 meter between adjacent transmitters/receivers. (9) stylus overtravel limits xy plane: minimum + or - 12 degree ; z-axis: minimum 4 mm. (10) activation method = m -code controlled and programmable by other standard methods. (11) environmental protection (ip rating) = minimum ipx8 for both probe and receiver shall be supported with manufacturers or from nabl/ilac or equivalent accredited lab. (12) software interface / configuration = integrated software cycles or digital rec eiver setup with display and remote controller. (13) status indications = visual or digital display of: error si gnals, probe pulse, battery status, signal strength etc. general requirements:- (1) the system should be c ompatible with major cnc controllers and open for integration. (2) setup, calibration, and testing must be d one at the site by the supplier. (3) all associated documentation (user manuals, circuit diagrams, paramete r lists) must be provided. (4) training to the cnc operators and maintenance personnel is to be included. ( 5) manufacturers test certificate (mtc) for the product shall be submitted along with the supply. in additio n, the manufacturer shall submit an ipx8 test report / certificate of confirmation specifically confirming co mpliance of the supplied product with the ipx8 rating. (6) oem or oem authorized dealers only shall quote & shall submit oem authorization letter/authorized dealer ship certificate (in case of dealer)/ oem declarati on along with the offer. (7) data sheet of the product quoted shall be submitted along with the offer. [ war ranty period: 12 months after the date of delivery ] ]

Contact Information