|
Tariff - Whitewash Roller – 5 Pieces For 2,000 Tenge For The Amount Of 10,000 Tenge. Roller Width 250 Mm, Roller Diameter 60 Mm. Gost 10831–87., Tariff - Lime - 300 Kg At 200 Tenge Per Kg, In The Amount Of 60,000 Tenge. Bags Of 25 Kg. Gost 9179–2018. With Unloading., Tariff - For Grouting Tiles – 20 Kg For 2,300 Tenge, In The Amount Of 46,000 Tenge. St Rk En 13888-2017. With Unloading., Tariff - Tile Adhesive - 25 Kg Bag, 18 Bags Of 4,500 Tenge, Totaling 81,000 Tenge. Bags Of 25 Kg. St Rk 1168-2006. With Unloading., Tariff - Tile - 72 M2, 4,500 Tenge Each, For A Total Amount Of 324,000 Tenge. Gost 13996-2019 - Ceramic Tiles 60*60*1 Cm, Dimensions To Be Agreed With The Customer. With Unloading., Tariff - Cement Brand M 400, Gost 10178-85 In Waterproof Packaging (50 Kg Each) With Unloading - In The Amount Of 40 Bags Of 3,400 Tenge, For A Total Amount Of 136,000 Tenge, The Brand Should Be Agreed With The Customer;, Tariff - Thermal Insulation Material Based On Basalt Fiber (Minslab), Density 50 Kg/M³, Thickness 10 Cm, In The Amount Of 72 M2 For 12,000 Tenge For A Total Amount Of 864,000 Tenge. Made Of Basalt Fiber, Resistant To High Temperatures, Non-Flammable, Environmentally Friendly, Thick. Density - 50 Kg/M³, Meets The Requirements Of Gost 9573-2012. With Unloading., Tariff - Glue For Ceiling Fillets For Installation Of Ceiling Skirting Boards Indoors, In The Amount Of 10 Kg, Price Per 1 Kg 2,000 Tenge, For A Total Amount Of 20,000 Tenge. The Adhesive Is Designed For Reliable Fastening Of Ceiling Fillets Made Of Polystyrene Foam, Polystyrene Foam And Other Suitable Materials To Walls And Ceilings. Material: Ready-Made Adhesive Composition Or Assembly Adhesive Intended For Interior Finishing Work. Characteristics: High Adhesion To The Base, Ease Of Application, Quick Setting, Resistance To Cracking After Drying, Can Be Used On Concrete, Plastered And Other Suitable Surfaces. The Glue Must Be New, In Undamaged Original Packaging, And Comply With The Requirements Of Current Standards And Technical Specifications For This Type Of Product. With Unloading., Tariff - Fillet - 50 M, 1,200 Tenge Each, For A Total Amount Of 60,000 Tenge. Gost 8242-88, Material And Color To Be Agreed With The Customer. H (Height) - 80 Mm, W (Width) - 65 Mm, Length - 2000 Mm, Material High Density Polystyrene. Fillet For A Regular Ceiling. With Unloading., Tariff - Plasterboard Sheet For Interior Decoration, With A Total Area Of 72 M², In The Amount Of 36 Pieces, Size Of One Sheet - 1,200 × 2,000 Mm, Thickness - 12.5 Mm. The Approximate Price For 1 Sheet Is 4,000 Tenge, For A Total Amount Of 144,000 Tenge. Material: Gypsum Core, Lined On Both Sides With Special Cardboard. Characteristics: Designed For Covering Walls And Ceilings, Installing Partitions And Leveling Surfaces Indoors; It Has A Smooth Surface, Is Easy To Install And Process, And Is Suitable For Subsequent Puttying, Painting And Wallpapering. The Product Must Be New, Without Cracks, Chips, Deformations Or Damage To Edges, And Comply With The Requirements Of Current Standards And Technical Specifications For This Type Of Product. With Unloading., Tariff - Edged Lathing, Size 30×80×6000 Mm, 1St Grade, Volume 3.0816 M³. Intended For Use In Construction And Installation Work, Production Of Formwork, Decking And Other Construction Purposes. Complies With Gost Requirements. 214 Pieces, 6 M Each. With Unloading., Tariff - Beam, Size 40×150×6000 Mm, 1St Grade, Volume 2.736 M³. Intended For Use In Construction And Installation Work, Production Of Formwork, Decking And Other Construction Purposes. Complies With Gost Requirements. 76 Pieces, 6 M Each. With Unloading., Tariff - Protective Mask Respirator – 20 Pcs. The 3M 8122 Respirator Of Protection Class Ffp2 With An Exhalation Valve Is Designed To Protect The Respiratory System From Dust, Aerosols And Fog During Work. The Design Of The Respirator Is Cup-Shaped, Ensuring A Tight Fit To The Face. The Exhalation Valve Features 3M™ Cool Flow™ Technology, Which Helps Dissipate Heat And Moisture For Easier Breathing During Long Periods Of Use. The Filtration Efficiency Is Up To 12 Maximum Permissible Concentrations. The Respirator Is Equipped With An Adjustable Nose Clip, A Soft Seal In The Nose Area And A Hypoallergenic Inner Layer. The Color Of The Respirator Is White. Intended For One-Time Use. Operating Temperature Ranges From -30 °C To +70 °C. Usage Period: Up To 5 Work Shifts. The Respirator Is Intended For Use In Construction, Metallurgy, Woodworking, Agriculture, Manufacturing Plants And Other Workplaces With High Levels Of Dust., Tariff - Boot Oven, Per 1000 Sq.M. With Solid Fuel, Quantity 1 Pc. The “Boot” Stove Is Designed For Heating Rooms Up To 1000 M². The Rated Thermal Power Is 100 Kw. The Boiler Is A Classic Type, Runs On Solid Fuel. Firewood, Sawdust, Oats, Hard And Brown Coal, Coke And Bark Can Be Used As Fuel. Automatic Fuel Supply Is Not Provided. The Furnace Is Equipped With Four Heat Exchangers Made Of Steel. There Are 4 Rotations Inside The Oven To Improve Heat Transfer Efficiency. The Furnace Body Is Made Of Metal 6 Mm Thick. The Mass Of The Oven Is 425 Kg. The Chimney Is Made Of A Pipe With A Diameter Of 219 Mm. Exhaust Gases Are Removed Through A Chimney. The Stove Is Installed On The Floor. Overall Dimensions: Height - 1600 Mm, Width - 520 Mm, Depth - 1060 Mm. Country Of Origin: Kazakhstan. Condition Is New., Tariff - Metal Corner 50×50×3 Mm – 200 M, Made Of Carbon Steel, Thickness – 3 Mm, Shelf Width – 50×50 Mm, Length – 6 Meters. The Metal Corner Is Intended For Construction And Installation Work, Manufacturing, Fastening And Strengthening Of Metal And Other Structures. The Surface Of The Product Must Be Smooth, Without Mechanical Damage And Signs Of Corrosion., Tariff - Sand Block Skts-1 – 1,500 Pcs., Gray Color, Hollow Concrete Wall Block. Block Dimensions: Length – 390 Mm, Width – 190 Mm, Height – 190 Mm. The Weight Of One Block Is Approximately 18 Kg., Tariff - External Doors – 3 Pieces, 200,000 Tenge Each, For A Total Amount Of 600,000 Tenge. Complete Set. Gost 31173-2016, Dimensions 2X1 M. Steel Door Block With Closed Frame Gost 31173-2003 Insulated, Single-Floor (External 2X1 - 3) With Installation In Talgar. Installation Time Should Be Agreed With The Customer., Tariff - Plastic Window Blocks In The Amount Of 4.5 M², Price Per 1 M² 65,000 Tenge, For A Total Amount Of 292,500 Tenge, Determined Based On The Results Of Accurate Measurements Of Actual Openings, With A Total Area Of 4.5 M², With Delivery, Manufacturing, Delivery And Installation. Window Blocks Must Be Made Of Pvc Profiles Intended For Use In The Conditions Of The Republic Of Kazakhstan. The Design Is Tilt-And-Turn And/Or Solid In Accordance With The Actual Dimensions And Purpose Of The Premises. Window Units Must Be Equipped With Double-Layer Glass, Appropriate Fittings, Seals And All Necessary Components For Full Operation. The Double-Glazed Window Must Provide The Necessary Heat And Sound Insulation. The Exact Dimensions Of Window Openings Are Determined By The Contractor Directly On Site Before The Manufacture Of Window Structures. The Contractor Is Obliged To Independently Carry Out Control Measurements Of Each Window Opening, Taking Into Account The Width, Height, Diagonals, Condition Of The Slopes And Features Of Existing Structures. Manufacturing Windows Without Prior Actual Measurements Is Not Allowed. Installation Includes Installing Window Blocks In Place, Leveling And Securely Fastening Structures, Sealing Assembly Joints With Foam And Sealing Materials, Manufacturing And Installing Window Sills, Installing Sills, Adjusting Fittings, Removing Protective Film And Construction Debris After Completion Of Work. Window Sills Must Be Made Of Moisture-Resistant Material, Correspond To The Actual Dimensions Of The Window Openings, Be Securely Fastened And Provide A Tight Connection To The Window Structure. Window Structures Must Be New, Free From Mechanical Damage, Cracks And Defects, Ensure Tight Closing Of The Sashes, Heat And Sound Insulation, As Well As Protection From Precipitation. The Color, Number Of Window Units, Sashes Configuration And The Presence/Number Of Vents Are Agreed Upon With The Customer Directly When Taking Measurements On Site., Tariff - Led Lamp For The Office To Illuminate Work Areas, In The Amount Of 8 Pcs., Approximate Price For 1 Pc. — 7,000 Tenge, For A Total Amount Of 56,000 Tenge. The Lamp Is Designed For Organizing High-Quality And Uniform Lighting Of Classrooms And Office Premises. Material And Characteristics: Led Light Source (Led), Supply Voltage 220 V, Color Temperature 4000–6500 K, Metal And/Or Durable Plastic Housing, Diffuser For Uniform Distribution Of Light Flux, Energy Efficiency, Long Service Life And No Visible Flicker. The Lamp Must Be New, In Original Packaging And Comply With The Requirements Of Current Standards And Technical Specifications For This Type Of Product. With Unloading. The Type And Dimensions Should Be Agreed With The Customer., Tariff - Emulsion – 100 Kg For The Amount Of 100,000 Tenge. Bucket 25 Kg. Gost 28196–89. With Unloading.
|
