|
Charger For Batteries Of Robotic Systems. Charger Skyrc D100neo. All Characteristics Must Be No Less Than: Dc Input Voltage - No Less Than 9–28 V; Ac Input Voltage - At Least 95–228 V; Maximum Power When Powered By Alternating Current - Not Less Than 95 W; Maximum Power When Powered By Direct Current - No Less Than 190 W; Power Of The Main Port - At Least 4 W; Maximum Power Of The Balanced Port Is No Less Than 23 W; Port Power With Support For Accelerated Charging - At Least 19 W; Voltage And Current Of The Accelerated Charging Mode - No Less Than 4–2.8 A, 8–1.9 A And 11–1.4 A; Fast Charging Mode Power - At Least 17 W; Voltage And Current Of The Power Supply Mode - No Less Than 4–2.8 A, 8–2.09 A And 11–1.58 A; Power Supply Mode - At Least 19 W. The Charger Is Designed For Charging Batteries And Is Equipped With Dc And Ac Inputs, As Well As Main And Balance Ports For Connecting Appropriate Battery Systems., Aluminum Structural Profile C-Shaped For Robotic Structures, 1 Hole, Length 48 Mm. 1120 U-Channel (1 Hole, 48Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: Product Weight - No Less Than 33 G; Length - From 45 To 50 Mm. The Design Includes An Aluminum Profile Element Designed For Creating And Connecting Parts Of Robotic Structures. The Product Is Made Of Aluminum And Has An Anodized Surface. The Profile Is Used As A Structural Element For The Formation Of Frame And Mechanical Units. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Wired Game Controller For Controlling Robotic Systems. Rev Usb Ps4 Comp Gamepad. All Specifications Must Be At Least: A Wired Game Controller Is Designed To Control Robotic Systems, Learning Platforms, And Other Equipment That Supports Wired User Input. The Device Features A Type-A Universal Serial Bus Interface, A Touchpad With Multi-Point Touch Support, And Two Additional Re-Mappable Buttons Located On The Back Of The Case. The Controller Is Equipped With A Vibration Feedback System, A Jack For Connecting Stereo Headphones With A Diameter Of At Least 3 Mm And A Programmable Led Indicator. The Connecting Cable Has A Length Of At Least 665 Mm., Aluminum Structural Profile C-Shaped Low Profile For Robotic Structures, 10 Holes, Length 264 Mm. 1121 Low-Side U-Channel (10 Hole, 264Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Structural Aluminum Profile Is Intended For Creating Load-Bearing, Connecting And Frame Elements Of Robotic Structures. The Product Is Made In The Form Of A Low-Profile C-Shaped Channel Made Of Aluminum. The Profile Has At Least 9 Mounting Holes. The Profile Surface Is Treated With Transparent Anodizing. The Mass Of The Product Is At Least 85 G. The Length Of The Structural Profile Ranges From 250 To 277 Mm. The Low-Profile Design Allows The Product To Be Used In Conditions Of Limited Installation Space. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Aluminum Structural Profile C-Shaped For Robotic Structures, 13 Holes, Length 336 Mm. 1120 U-Channel (13 Hole, 336Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Structural Aluminum Profile Is Intended For Creating Load-Bearing, Connecting And Frame Elements Of Robotic Structures. The Product Is Made In The Form Of A C-Shaped Channel And Is Made Of Aluminum. The Profile Has At Least 12 Mounting Holes. The Profile Surface Is Treated With Transparent Anodizing. The Mass Of The Product Is At Least 210 G. The Length Of The Structural Profile Ranges From 319 To 353 Mm. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Aluminum Structural Profile C-Shaped For Robotic Structures, 15 Holes, Length 384 Mm. 1120 U-Channel (15 Hole, 384Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Structural Aluminum Profile Is Intended For Creating Load-Bearing, Connecting And Frame Elements Of Robotic Structures. The Product Is Made In The Form Of A C-Shaped Channel And Is Made Of Aluminum. The Profile Has At Least 14 Mounting Holes. The Profile Surface Is Treated With Transparent Anodizing. The Mass Of The Product Is At Least 240 G. The Length Of The Structural Profile Ranges From 364 To 403 Mm. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Silicone Wheel With High Friction Coefficient For Drive Mechanisms, Diameter 32 Mm. Gripforce Gecko Wheel (32Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Wheel Is Intended For Use In Drive And Contact Mechanisms Of Robotic Structures Where Increased Traction With The Surface Is Required. The Product Has A Diameter Of 30 To 33.6 Mm And Is Made Of Silicone Rubber With An Internal Plastic Base. The Mass Of The Wheel Is At Least 7 G. The Hardness Of The Working Material Is At Least 14 Units On The Shore A Scale. The Design Is Intended For Use In Mechanisms For Capturing, Feeding, Transporting And Moving Objects., Set Of Toothed Belts And Pulleys For Robotic Mechanisms, Toothed Profile Pitch 5 Mm. 5Mm Pitch Htd Timing Belt & Pulley Starter Pack. All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Kit Is Designed To Transmit Rotational Motion And Torque Between The Shafts Of Robotic Mechanisms Using Toothed Belts And Pulleys. The Set Includes Timing Belts Of Various Lengths, Several Timing Pulley Options, Guides And Tension Pulleys, Connecting Elements And Fastening Components. The Pitch Of The Timing Profile Of Belts And Compatible Pulleys Is From 4.75 To 5.25 Mm. The Kit Also Includes Two Hubs Designed To Connect The Corresponding Pulleys To The Profiled Drive Shafts., Aluminum Robotics Spacer Kit, 56 Mm, 4 Pcs. 1516 Standoff (56Mm) - 4 Pack. All Characteristics Must Be No Less Than, And Dimensional Parameters Must Be Within The Specified Limits: The Kit Is Intended For Creating Spacer, Connecting And Load-Bearing Elements In The Designs Of Robotic Systems. It Consists Of Four Aluminum Spacers Designed To Connect Structural Components And Form A Fixed Distance Between Them. The Weight Of One Rack Is At Least 6 G, Length - From 53 To 59 Mm. The Racks Have An Internal M4 Thread With A Pitch Of 0.66 To 0.74 Mm And A Multifaceted Section With A Spanner Size Of 6.6 To 7.4 Mm. Spacer Posts Are Designed To Form Rigid Connections Between Individual Structural Elements And Install Components At A Given Distance From Each Other. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Battery Health Analyzer For Robotic Systems, 12 V. 12V Battery Health Analyzer. All Characteristics Must Be At Least: The Analyzer Is Designed To Monitor The Condition And Check The Parameters Of Batteries Used In Robotic Systems. The Device Is Designed To Work With Nickel-Metal Hydride Batteries With A Nominal Voltage Of At Least 11 V And An Electrical Capacity Of At Least 2850 Mah. To Connect The Battery, There Is One Input Connector Of The Appropriate Power Type. The Analyzer Weighs No Less Than 19 G. The Compact Design Allows The Analyzer To Be Used Directly For Maintenance Of Battery Systems., Flange Ball Bearing Set For Robotic Structures, Inner Diameter 5 Mm, 2 Pcs. 5Mm Id Flanged Ball Bearing - 2 Pack. All Characteristics Must Be No Less Than, And Dimensional Parameters Must Be Within The Specified Limits: The Set Includes Two Flanged Ball Bearings. The Inner Diameter Of Each Bearing Is From 4 To 5.3 Mm, The Outer Diameter Is From 13 To 14.7 Mm, And The Thickness Is From 4 To 5.3 Mm. The Flange Design Ensures Convenient Positioning Of The Bearing In The Seat. The Ball Mechanism Reduces Rotational Resistance. The Bearings Are Intended For Use In Mechanical Components Of Robotic Structures Where Precise And Smooth Rotation Is Required., Ball Bearing Set For Robotic Structures, Inner Diameter 8 Mm, 2 Pcs. 1611 Series Ball Bearing (8Mm Id) - 2 Pack. All Characteristics Must Be No Less Than, And Dimensional Parameters Must Be Within The Specified Limits: The Set Includes Two Ball Bearings Designed To Ensure Smooth And Stable Rotation Of Shafts And Moving Elements Of Robotic Structures. Each Bearing Is Made Of High Carbon Steel And Has An Internal Mounting Hole With A Diameter Of 7 To 8.4 Mm. The Mass Of Each Bearing Is At Least 2 G. Ball Bearings Are Designed For Use In Various Mechanisms Of Robotic Systems, Including Drive, Rotation And Connecting Units. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Aluminum Structural Profile C-Shaped Low Profile For Robotic Structures, 9 Holes, Length 240 Mm. 1121 Low-Side U-Channel (9 Hole, 240Mm). All Characteristics Must Be No Less, And The Dimensional Parameters Must Be Within The Specified Limits: The Structural Aluminum Profile Is Intended For Creating Load-Bearing, Connecting And Frame Elements Of Robotic Structures. The Product Is Made In The Form Of A Low-Profile C-Shaped Channel. The Profile Has At Least 9 Mounting Holes. The Surface Of The Product Is Treated With Transparent Anodizing. The Mass Of The Product Is At Least 77 G. The Length Of The Structural Profile Ranges From 228 To 252 Mm. The Low Profile Design Allows The Product To Be Used In Confined Spaces. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Aluminum Structural Profile C-Shaped For Robotic Structures, 9 Holes, Length 240 Mm. 1120 U-Channel (9 Hole, 240Mm). All Characteristics Must Be No Less Than, And The Dimensional Parameters Must Be Within The Specified Limits: The Structural Aluminum Profile Is Intended For Creating Frames, Load-Bearing Elements, Connecting Units And Other Parts Of Robotic Structures. The Product Is Made Of Aluminum Alloy And Has A C-Shape. The Profile Has At Least 9 Mounting Holes Located Along The Working Part. The Surface Of The Product Has A Transparent Anodized Coating. The Mass Of The Product Is At Least 151 G. The Length Of The Structural Profile Is From 228 To 252 Mm. The Connecting Dimensions Of The Product Ensure Mechanical Compatibility With The Structural Set Of Position 3 Without Additional Processing., Set Of Fasteners With A Semicircular Head For Structural Elements Of Robotic Systems, M4 Thread. M4 Button Head Screw Assortment Pack. All Characteristics Must Be No Less Than, And Dimensional Parameters Must Be Within The Specified Limits: The Kit Is Designed For Fastening And Connecting Structural Elements Of Robotic Systems And Includes A Set Of Fasteners With Metric Threads, A Semicircular Low-Profile Head And An Internal Hex Drive. The Total Number Of Fasteners In The Set Is At Least 570 Pcs. Includes Screws With M4 Threads And Pitches From 0.66 To 0.74 Mm, As Well As Corresponding Hex Nuts, Self-Locking Nuts, Lock Washers And Flat Washers. The Screws Are Available In Several Lengths: No Less Than 5 Mm, No Less Than 7 Mm, No Less Than 9 Mm, No Less Than 11 Mm, No Less Than 15 Mm And No Less Than 52 Mm. All Screws Have A Protective Zinc Coating. The Outer Diameter Of Flat Washers Is At Least 7 Mm. The Internal Hex Drive Is At Least 2.3Mm In Size.
|
