|
Bids Are invited for Custom Bid For Services - Power Transformer Protection And Distribution Transformer Protection Work On Semi Turnkey Basis In Business Plan 2026 27 Under Edc Fatehabad Agra - Providing & Fixing Of Oti As Per Respo Norms. , Providing & Fixing Of Wti As Per Respo Norms. , Cartiage Of Following Material From Store Center Agra To Work Of Site Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work..(Distance 00-100Kms.) Required Material Viz. Earthing Complete By Ms Earthing Rod Of 20X2500mm & 06 Swg Earthing Wire (470 Nos.) 33 Kv La (18 No), Relay(12 No), 33 Kv Ct 400/200/1-1A (03 Nos.), Battery Set 12 Nos X 2Volts, 200 Ah (05 Nos.) And Other Line Material, If Required In Estimate/Package. , Installation Of Distribution T/F Neutral/Body Earthing With Ms Earthing Rod Of 20X2500mm & 06 Swg Earthing Wire Work Complete In All Respects As Per Respo Norms. , Installation Of 33 Kv La As Per Respo Norms And Direction By Supervising Engineer. , Installation Of Relay As Per Respo Norms And Direction By Concern Ae Meter. , Installation Of 33 Kv Ct As Per Respo Norms And Direction By Concern Ae Meter. , Installation Of Battery Set With Charger(12 Nosx2volts, 200 Ah) Complete In All Respects As Per Respo Norms , Repair/Construction Of Plinth For 250/400 Kva Transformer Of Size 6X6x4 Above The Ground Lable And 1 Feet Below The Ground With Dismantling/Removal Of Existing 250/400 Kva Transformer From The Existing Plinth, Safely Keeping The Transformer At A Suitable Lacation, Repairing And Strengthening Of Existing Transformer Plinth As Per Rsspo Norms. And Thereafter Re-Installing And Properly Fixing The 250/400 Kva Transformer On The Repaired Plinth, Complete In All Respects. The Contractor Shall Arrange And Provide All Required Materials For Plinth Repair. The First Class Brick Wall Work Shall Be 9 Thick In Ratio 1:4 [Cement And Sand]. The Hollow Portion Among The Wall Shall Be Filled Up With The Brick Ballast. On The Top Of The Wall Of Plinth There Shall Be Rcc Work In Ratio 1:3:6 [Cement, Sand And Grit Stone] By Using 12 Mm Dai Ms Bar At Distance Of 9. There Shall Be Plastering All Over The Plinth 12 Mm Thick In Ratio 1:4 [Cement And Sand] Above The Ground Level. Proper Watering And Curing Of The Plinth Shall Be Carried Out As Per Direction Of Supervising Engineer. Work Complete In All Respects Including The Cost Of Arrangement Of Labour,T&P, Carrier Etc. Required For Proper Completion Of Work. , Fencing Of 250/400 Kva T/Fs As Per Following Specification -Fabrication Of 65X65x6 Mm Size Ms Angle Frame Of Size 3000X2400mm With 450 Mm Long Angle For Grouting The Frame And Fixing Of 2X1.5, 10 Swg Welded Wire Mesh With Ms Strip Of 24X5mm Size All Round The Frame And Drilling 9 Mm Holes Insides Of Frames At As Distance Of 300Mm For Jointing Of Frame With The Help Of Bolts And Nuts Including Cost Of Material. The Width Of Panal May Vary As Per Site Conditions, Grouting And Fixing Of Angle Iron Frames In Ratio 1:2:4 (Cement, Coarse Sand And Stone Ballast ) In The Pocket Of 150X150x150mm All Round The Plinth And Bolting Of Frames With 25X8 Mm Size Bolts And Nuts, Making Main Gate In Front Of The Plinth Of Size 3000X2400 Mm By Making Two Leaves Of Size 3000X1200mm Size And Grouting The Same In Ratio And Method Mentioned At Item (B) Above Fixing With Hinges With Handlas For Locking System & Painting Of Entire Wire Mesh Angle Iron Etc. With Bus Gray Super Enamelled Paint In Two Coats On The Primer Two Coats Of Red Oxide. Work Complete In All Respects Including The Cost Of Arrangement Of Labour,T&P, Carrier Etc. Required For Proper Completion Of Work. , Neutral/Body Earthing Of 250/400 Kva Distribution Transformer By Maintenance Free Earthing Electrods (Chemical) By Digging Pits 6 Dia 3Mtr. Deep Including Inserting Pipe In Pipe Technology Concept Involve Two Mild Steel Pipes One Inserted Inside The Other Of Size ;- 1. Inner Pip Dia Meter 50 Mm. 2. Outer Pipe Dia Meter 100 Mm. Length Of The Both Pipe Shall Be 3000 Mm. The M.S.Pipe Shall Be Isi Mark Of Class B As Per Is 1239. Thickness Of The Pipe Shall Be 12 Swg. The Empty Space In The Pipe Shall Be Filled With The Specially Developed Crystalline Material Conductiv Mixture Such As Copper And Aluminimum Powder.Conductive Carbon And Bonding Material Etc. Mixed In Diffrent Proportions. Conductive Mixture Contents Shall Be 70% Carbon Powder & 30% Metal Powder Preferably Pure Copper Or Aluminum Material Along With The Required Quantity Of Bonding Materials. Granule Size Of The Carbon & Metal Powder Shall Be 100 Mesh. The Mixture If Forced (Pressurized) Inside The Earth Electrode In Empty Space Of Inner Pipe & In Empty Space Between The Inner & Outer Pipe Of The Earth Electrode, In Paste Form And After Soldification Of The Same The Bottom End Cap As Well As Top End Cap Is Provided. The Mixture Shall Be Pressed By Machine In The Pipe. Precaution Shall Be Taken Has To Have No Air Gap Inside The Pipe While Pressing. The Back Fill Compound (Earth Enhancment Material ) Shall Be Superior Conductive Material That Improves Earthing Effectiveness Especially In Areas Of Poor Conductivity Such As Rocky Ground, Sandy Soil & Areas Of Moisture Varation. It May Contain Conductive Cement (20%) Graphite Carbon Powder(50%), Hydrous Aluminum Siliacate (10%), Sodium Montmorillonite (20%) Etc. It Shall Be Placed Around Earth Electrode In The Earth Pit To Improve The Conductive Of Earth Electrode & Ground Contact Area. Mild Steel Electro Galavanized Flat 50X6 Mm Shall Welded To Earth Electrode Pips & Connected With Trasnformer Neutral And Body As Below With The Hlep Of Steel Nut & Bolt Or Through Welding As Per Requirment Of Site, To Gi Pipe And Filling Of Chemical Mixutre Around The Gi Pipe Upto 3 Mtr. Including Making Of Chamber & Connecting The Top Of The Inserted Pipe With Transformer Body & Neutral Through M.S.Flat 50X6mm With The Help Of Nut & Bolt Or Through Welding And Making A Main Hole Of Size 2×2 And Covering The Same By A Stone Pad For The Purpose Of Poring Water For Moisture. Work Complete In All Respects Including The Cost Of Arrangement Of Labour,T&P, Carrier Etc. Required For Proper Completion Of Work. , Dismentling, Removal Of Old & Used Scrap Material And Received Back To Ele. Store Center Tajgang Agra Including Loading, Unloading Both Ends (0-70Km) 33 Kv La(18 No), Relay (12 No), 33 Kv Ct(03 No), Battery Set (05 No) And Other.
|
