Request For Quotation 01. Materials And Equipment. (Div. 363) (Z. 390) in Kazakhstan

Work Detail

Iae. Steel Clamp Clamp. The Clamp Is A Steel Structure Of Two Half-Rings Connected By Screws. Rubber Gasket. Clamp Diameter: 88 To 94 Mm. Clamp Material: Galvanized Steel. Fastening: Welded Nut With M8/M10 Thread. The Clamp Is Complete With A Pin-Screw And Dowel. Gost 28191-90. Certificate., Iae. Functional, Technical, Quality And Performance Characteristics. Ball Valve, Steel, Size Up To 50 Mm. Type: Coupling (Threaded). Control Type: Manual. Valve Function: Three-Way. Nominal Diameter (Dn/Dn): 10 Mm. Thread (Inches): 3/8. Operating Pressure: Up To 6.3 Mpa (63 Bar). Body Material: Stainless Steel. Seal: Ptfe. Certificate., Iae. The Drive Is Pneumatic, Multi-Turn. Double-Acting Piston Pneumatic Actuator With Rack And Pinion Mechanism, Designed For Automatic Control Of Shut-Off Valves (Ball Valves, Butterfly Valves). Cylinder Diameter 75 Mm. Rotation Angle 0° - 90°±5°. Operating Pressure From 2 To 8 Bar (Max. 10 Bar). Air Connection: G1/4 Inch. Temperature Range: From Minus 20 To Plus 80. Working Medium: Purified Compressed Air Or Inert Gas. Housing Material: Anodized Aluminum Alloy (Often With A Polyester Coating). Gost 34287-2017. Operating Manual/Instructions. Certificate., Iae. Pneumatic Vibrator, Ball Vibrator Is Used To Eliminate Compactions And Sticking Of Bulk Materials In Bunkers And Transportation Systems. Functional Technical, Quality, Operational Characteristics. Housing: Aluminum With A Hard Anodized Finish To Resist Corrosion. Air Supply Pressure 0.2 Mpa. Noise Level: From 57 To 62 Dba. Temperature Range: From Plus 100°C To 120°C. Connection: Thread G1/8. Oscillation Frequency From 5000 To 5100 Rpm. Driving Force 34 N. Air Flow From 0.5 To 0.8 L/Min. Certificate., Iae. Steel Clamp Clamp. Clamp Diameter: From 60 To 65Mm. Material: Galvanized Steel. Construction: Steel Wire And Tie Bolt. Clamp Type: Stationary. Gost 28191-89. Certificate., Iae.Technical Pressure Gauge. Device Type: Pressure Gauge For Precise Measurements. Upper Limit 2.5 Mpa. Case Diameter: 160 Mm. Accuracy Class: 0.6 (Permissible Error ±0.015 Mpa). Measuring Range: From 0 To 2.5 Mpa. Fitting Thread: M20x1.5. Connection Location: Radial (Bottom). Degree Of Protection: Ip40. Verification No Earlier Than 2025. The Product Must Have A Certificate Of Approval Of The Si Type, A Passport And Be Included In The Register Of The Ssi Of The Republic Of Kazakhstan. Gost 2405-88. Certificate ., Iae. Technical Pressure Gauge. Device Type: Pressure Gauge For Precise Measurements. Measuring Range: 0 To 0.6 Mpa. Accuracy Class: 0.6 (Permissible Error 0.6% Of Scale). Case Diameter: 160 Mm. Connecting Thread: M20x1.5. Connection Location: Radial (Bottom). Vibration Resistance At An Amplitude Of 0.1 Mm (From 5 To 25 Hz). Degree Of Protection: At Least Ip40. Verification No Earlier Than 2025. The Product Must Have A Certificate Of Approval Of The Si Type, A Passport And Be Included In The Register Of The Ssi Of The Republic Of Kazakhstan. Gost 2405-88. Certificate ., Iae. Steel Ball Valve, Nominal Pressure 0-420 Mpa, Diameter 10-1400 Mm, Pneumatic/Hydraulic. Ball Valve With Double Acting Pneumatic Actuator. The Kit Includes A Rotary Pneumatic Actuator, An Electric Pneumatic Positioner (Distributor) And Limit Switches For Position Signaling. Conventional Diameter (Dn): 50 Mm (2 Inches). Design Type: Ball. Flow Direction: Three-Way. Type Of Design: Mayevsky 4. Thread Diameter, Inches: 2. Operating Pressure From 4 Mpa To 6.3 Mpa. Drive Type: Rotary Pneumatic, Double Acting (Air-To-Air). The Kit Includes: 1) Full Bore Ball Valve, Stainless Steel Material; 2) Pneumatic Actuator: Rotary. 3) Pneumatic Distributor: Electromagnetic 220V; 4) Limit Switch: Limit Switch Block (Mechanical Or Inductive). Connection: Gost 34293-2017., Iae. Steel Clamp Clamp. Clamp Diameter: 50 To 55 Mm. Material: Galvanized Steel. Construction: Steel Wire And Tie Bolt. Clamp Type: Stationary. Gost 28191-89. Certificate., Iae. Filter Cloth, Cotton. Composition: 100% Cotton. Density Not Less Than 400G/M2. Roll Width Is At Least 2 M. Material Thickness Is From 5 To 50 Mm. Gost 332-91. Certificate., Iae. Steel Clamp Clamp. Clamp Diameter: 140 To 150 Mm. Material: Stainless Steel. Fastening Material: Stainless Steel. Metric Thread Size M16. Mounting Plate: With Screw Clamp. Purpose: Holder Of An Insulated Lightning Rod. Thread M16×50. Gost 28191-89. Certificate.

Contact Information