|
Tender for Supply Of Various Consumables For Coal Mill (Hp-1103) To Rgtpp, Khedar, Hisar , Seal Wear Of Coal Mill Journal Assembly Shaft, Od-470 Mm, Id-390 Mm, Width- 102 Mm, Moc-Ss304 , Journal Housing Seal Cover For Journal Assembly Of Coal Mills Moc:Is1020 Cast Steel/En24 , Roller Retainer Ring For Coal Mills Moc: 16Mn , Journal Housing Guard/Liner Lower, Moc- Ss-304 , Roller Liner Device With Liners For Coal Mill, Base Plate: Ms , Liner: Ni Hard , Mill Bowl Hub Clamping Ring Moc- 16 Mn (1 Set=4 Nos.) , Shroud Plate1360x120x10 (1 Set= 8 Nos.) , Air Restriction Ring Large Size (Length Approx. 1800Mm, Width 60Mm, Thickness 28Mm) (1 Set= 8 Nos.) , Air Restriction Ring Small Size (Length Approx. 1800Mm, Width 35Mm, Thickness 28Mm) (1 Set= 8 No.) , Mill Body Deflector Support Plate Ms, 1 Set= 3 Nos. , Separator Body Liner-I, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Ii, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Iii, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Iv, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-V, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Vi, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Vii, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Viii, Moc: Ni Hard Along With Their Weld Plug , Separator Body Liner-Ix, Moc: Ni Hard Along With Their Weld Plug , Complete Set Of Skrit Assembly With Both Lower And Upper Skirt K3741 13.0 , Lower Skirt For Coal Mill Hp-1103 (Moc:Carbon Steel) 1 Set= 4 Nos. , Bottom Mill Side Liners 1M X 1M X 12Mm, Moc: Ms ( 1 Set = 03 No.) , Scrapper With Liner Plate Long, Moc:Is 1030, Gr-Ii, (Cast Steel) Moc Of Linear Iss 276 Astm Grade-3 , Scrapper With Liner Plate, Short, Moc:Is 1030, Gr-Ii, (Cast Steel)Moc Of Linear Iss 276 Astm Grade-3 , Complete Set Of Ventury Of Coal Mills Hp-1103 , Set Of Classifier Blades Or Vane Of Deflector Door Moc- High Alloying Wear Resistance Material Hardness:- 55-62 Hrc With 4 Set Of Ss Nut , 28 Mill Discharge Valve (Mdv) Without Power Cylinder For Coal Mills Hp-1103 , Erw Straight Pc Pipe With Id- 684 Mm, Od-710Mm, Grade-Api 5L , Wearable Adjustable Shrink (Adjustable Orifice) For Coal Mill Hp-1103, Coal Pipeod-710Mm, Model-Smk Type-B , L-150 Coupling With Rubber Spider , Priming Valve For Lop Of Coal Mills , Seals Of Hot Shut Off Gate- L2000 Mm, Width 115Mm, Thickness-1.5Mm, Moc-Ss-304 , Seals Of Hot Shut Off Gate-L1800mm, Width 115Mm, Thickness-1.5Mm, Moc-Ss-304 , Aluminium Cover For Hot Air Diaphragram, Moc : Ai Sheet, 2 Mm Od: 950 Mm , Coal Mill Coupling Complete K3741.18.0 , Hexagonal Steel Set (Mill Coupling) Ss -304 , Taper Bolt With Washer & Nut , Moc: Medium Carbon Steel, En8 , Seal Air Assembly For Gear Box For Coal Mill , Feeder Outlet Hopper Of Rc Feeder , Feeder Outlet Gate Without Actuator , Drive Sproket Shaft For Feeder Outlet Gate , Gear For Feeder Outlet Gate , Coc Chain Set ( 72 Chain Links & 10 Chain Scrappers), Moc: Ms , Idler Roller For Rc Feeder Model:Cs2036, 1 Set=12 Nos. , Weighing Roller For Rc Feeder And Coal Mill Gt1631107 , Tension Roller For Rc Feeder And Coal Mill Gt1653407 , Eccentric Bearing Housing For Rc Feeder And Coal Mill , Take Up Pulley For Rc Feeder, Model: Cs 2024, Cs2036gt1650307 , Bushing For Rc Feeder And Coal Millgt1651807 , Take Up Pulley Shaft For Rc Feeder , Pyrite Chute/ Tramp Iron Spoute For Coal Mill Before Pv1, Moc- Ms, Thickness 16 Mm , Collar For Ventury Outlet Of Coal Mill Hp 1103, Moc: Carbon Steel , Flange For Hot Air Diaphragm , Wear Resistant Weld Overlay Plate With Carbide Layer Of 6 Mm For Coal Mill, Carbide Layer On Inner Side Of Curved Portion Dimensions-Height:1500Mm, Width-1000Mm, Thickness-10Mm (1 Set= 6 Nos.) , Vane Wheel Segment For Coal Mill (Hp-1103) (1 Set = 08 No.) , Ventury Vane For Coal Mill, Hardness= 60-62 Hrc , Hard Thickness=15Mm (1 Set=4 Nos.) , Trunion Bushing Journal K3741.14.4.0 , 600 Mw
|
