Tender For Proposed Interior Furnishing And Electrical Works At Bank Of India Madhavaram Premises At 284/337 ... in India

Work Detail

Tender For Proposed Interior Furnishing And Electrical Works At Bank Of India Madhavaram Premises At 284/337, Bazaar Street, Madhavaram, Chennai – 600 060. 1 False Ceiling (Gypsum Board) Providing & Fixing In Position False Ceiling In Gypboard 12Mm Thick For Horizontals & Verticals Fixed Over G.I. Framework As Specified By India Gypsum Co. Ltd. Including Finishing With White Plastic Emulsion Paint Etc. Complete In All Respects (Note:Only The Plan Area Will Be Measured For Payment. No Extra Payment Will Be Made For Cutouts, Grooves Mouldings Etc.) 408.3 1 Sft 0 2 Modular False Ceiling - Armstrong / Equivalent Make Providing And Fixing Armstrong (Fine Fissured Micro Look With Tagular Edge Using 15Mm Grid Sections) False Ceiling Of Size 24”X24” At 86 Levels From Ffl. Rate Shall Be Inclusive Of Providing The Total System With Installation Etc.. The Contractor Has To Maintain All Tiles In Good Order And Replace The Defected Tiles (At His Own Cost) Before Handing Over The Site For Branch Operations (Till Inauguration). 436 1Sft 0 3 Front Office Counter: Providing And Fixing In Position Front Office Counter 2’-6” Wide Comprising Of The Following Complete In All Respects; 1. Working Top Made With 25Mm Thick Mr Grade Plywood Finished With 1Mm Thick Laminate. Outside Edge Of The Working Top Shall Be Provided With ½” X 1” T.W. Beading Patti With Melamine Finish. 2. Vertical Facia (Apron) Made With Mr Grade Plywood Finished With 1Mm Thick Laminate With 1Mm Thick Groove At The Joint Of Laminates Of Two Different Shades. 3. Vertical Drop (Horizontal Band) Shall Be Provided On The Facia Below The Working Top Made With Mr Grade Plywood Finished With 1Mm Thick Laminate With Provision For Concealed Light, 1Mm Thick Groove Shall Be Provided At The Joint Of Two Different Shades Of Laminate. 4. Glazed Partitions Above Working Top To Be Provided With 12Mm Thick Clear Glass Cut To The Standard Shape Fixed To Partition As Per Fixing Details And To Boxing With Concealed S.S. Finished ‘D’ Brackets As Shown In The Drawings. The Exposed Edges Of The Glass Shall Be Finished In Mirror Polish. 5. 3’ -10” High Boxing (10” X 10”) Made With Mr Grade Plywood Finished With 1Mm Thick Laminate Including Providing And Fixing 6Mm Thick Square Frosted Glass At A Height 3’ -2” Above Finished Floor Level. 6. 1’ -9” High Boxing (5”X5”) Made With 12Mm Thick Mr Grade Plywood Finished With 1Mm Thick Laminate. 7. Vertical Supports Made With Mr Grade Plywood Finished With White Enamel Paint. 8. Telescopic Cpu Stand / Ready Made Keyboard Tray Shall Be Provided Of Approved Model And Make. 9. Footrest Made With T.W. Member Of Size 4” X 1 ½” Finished With French Polish. 10. Drawer Units As Per Drawing Shall Be Provided With Multipurpose Godrej Locks In Each Drawer. Facia Of Drawer Unit Shall Be Finished With 1Mm Thick Laminate And All Other Sides Shall Be Finished With White Enamel Paint. The Drawers Will Be Provided With Handles (Stanless Steel Finish) And Channels As Per Approval Of The Project Consultant / Bank. 11. Boxing As Per Drawing Made With Mr Grade Plywood Finished With Synthetic Enamel Paint Shall Be Provided Below The Table Top For Electrical Conducting And At The Bottom For The Lan Cabling / Telephone Wire Conducting. The Item To Include All Necessary Hardware And Fittings In Stainless Steel Finish, Lipping To All Edges And Making Provision Only For Electrical Fitting Behind The Front. Vertical Drop And Also In The 10”X 10” Boxing As Shown In The Drawing. Necessary Beadings With Melamine Polish For Fixing The Glass Are To Be Provided. Fixing The Glass Are To Be Provided. Etc.

Contact Information