|
The Rear Brake Pads On The 2015 Hyundai Grandeur (5Th Generation, Hg Body) Have Standard Dimensions And Characteristics For A Disc Brake System. Width: About 140.5 Mm, Height: About 60.3 Mm, Thickness: About 16.9 - 17 Mm Brake System Type: Sumitomo / Mando (Depending On Version And Market), Wear Warning Indicator: Mechanical (Creaky) Or A Seat For An Electronic Sensor (Depending On The Specific Configuration). Original Number (Oem): A Catalog Number Like 58101... Is Often Used (It Is Recommended To Check By Vin Code). If The Product Does Not Match The Original, The Product Is Returned To The Supplier Within 10 Days Tariff, Steering Rack Boot On The Steering Rack On The Left And Right Sides (Usually The Same Or Symmetrical). Material: Elastic Wear-Resistant Thermoplastic Or Rubber, Resistant To Temperature Changes And Road Chemicals. Design: Corrugated Cover With Seats For Small (On The Steering Rod Side) And Large (On The Rack Body Side) Diameters, Fixed With Clamps. Approximate Dimensions (Universal For Analogs): Length (Height): Approx. 180–185 Mm. Small Hole Diameter: Approx. 11-13Mm, Large Hole Diameter: Approx. 45–54 Mm (Depending On Manufacturer). Pascal (Article I60501pc) Is A Boot Kit With Height Dimensions Of 183 Mm. If The Product Does Not Match The Original, The Product Is Returned To The Supplier Within 10 Days Tariff, The Front Brake Pads On The 2015 Hyundai Grandeur (5Th Generation, Hg Body) Have Standard Dimensions And Characteristics For A Disc Brake System. Width: About 140.5 Mm, Height: About 60.3 Mm, Thickness: About 16.9 – 17 Mm Brake System Type: Sumitomo / Mando (Depending On Version And Market), Wear Warning Indicator: Mechanical (Creaky) Or A Seat For An Electronic Sensor (Depending On The Specific Configuration). Original Number (Oem): A Catalog Number Like 58101... Is Often Used (It Is Recommended To Check By Vin Code). If The Product Does Not Match The Original, The Product Is Returned To The Supplier Within 10 Days Tariff, Front Brake Discs, Type: Ventilated, Outer Diameter: 300 Mm Or 320 Mm (Depending On The Modification And Size Of The Brake System), Thickness (Nominal): 28 Mm / 30 Mm, Number Of Mounting Holes: 5, Drilling (Pcd / Hole Pattern Diameter): 5X114.3 Tariff, Front Upper Ball Joint For Hyundai Grandeur V Generation (Hg Body, 2011–2016 Model Year, Including 2015 Restyling) Is Supplied As A Separate Structural Element (Not Tightly Pressed Into The Lever). It Is Attached To The Lower Wishbone Using Bolts. Installation Side: Front Axle, Top (Left And Right Sides Are The Same). Pin Cone Size (Diameter): 18 Mm. Thread On Pin: M12 X 1.25. Mounting Type To Arm: 2 Bolts (In Some Catalogs, 3 Holes May Be Specified Based On The Central Hole/Pin). Distance Between Mounting Holes: 90 Mm. Diameter Mounting Bolts: 12 Mm (Holes In Lugs ~12.1–12.2 Mm). Average Part Weight: About 850 – 870 Grams. 54530-3S100 (Basic Original Hyundai/Kia Article) Tariff, Ignition System With Individual Coils For Each Spark Plug (Coil-On-Plug), Where The Coil Is Placed Directly On The Spark Plug, Power Type: 12 V (On-Board Network), Operating Voltage At The Output (Secondary Winding): Up To 25,000 - 35,000 V, Number Of Contacts (Pins) In The Connector: Usually 2 Or 3 Contacts (Depending On Engine Type - 2.4 L, Quantity Included: According To The Number Of Cylinders (4 Pieces For A 2.4 L Engine, Original Articles (Oem): For 2.4 L Engines: 27300-3F100 Tariff, Front Stabilizer Strut, Purpose: Front Suspension (Original Part Numbers (Oem): Depends On The Configuration, Popular Analogues From The Reliable South Korean Manufacturer Ctr Have Part Numbers Cl0296 / Pl0296. Design: Metal Rod With Two Hinge Pins (Ball Joints) At The Edges With Threaded Connections And Anthers. Tariff, The Cooling Radiator On The 2015 Hyundai Grandeur (Hg Generation) Should Have An Aluminum Structure With Soldered Fins And Plastic Tanks; Its Dimensions Depend On The Type Of Gearbox And Configuration. Material: Aluminum (Heat Exchange Part), Plastic (Tanks). Design: Tubular-Band (Brazed Fins). Core (Network) Length: Approx. 635–636 Mm. Core (Net) Width: Approx. 478 Mm. Thickness (Depth) Of The Network: From 16 Mm (For Standard Versions) To 26 Mm (Depending On The Presence Of Automatic Transmission And Climate Control). Diameter Of Pipes (Inlet/Outlet): 35 Mm / 35 Mm. According To The Engine Size - Most Often 2.4 Liter Engines Were Installed On The 2015 Model. The Presence Of A Built-In Oil Heat Exchanger Is Agreed With The Customer. Rate, Steering Tips For Hyundai Grandeur 2015 (Hg Generation, Restyling/Pre-Restyling With Power Steering): Thread Size (On The Thrust Side): M10 X P1.25 Mm (Options With External Thread M10x1.25 Are Also Available). Counter Thread / Pin Size (If Equipped): M16 X 1.5 (For Power Steering). Cone Size: Approx. 13.35 Mm. Installation Side: Left And Right Are Different (Paired Articles). Design: The Pin Is Protected By A Dense Rubber Boot, The Body Is Made Of High-Strength Steel Alloy. Before Purchasing, Be Sure To Check The Article By Vin Code Tariff, Front Lower Ball Joint For Hyundai Grandeur V Generation (Hg Body, 2011–2016 Model Year, Including 2015 Restyling) Is Supplied As A Separate Structural Element (Not Tightly Pressed Into The Lever). It Is Attached To The Lower Wishbone Using Bolts. Installation Side: Front Axle, Bottom (Left And Right Sides Are The Same). Pin Cone Size (Diameter): 18 Mm. Thread On Pin: M12 X 1.25. Mounting Type To Arm: 2 Bolts (In Some Catalogs, 3 Holes May Be Specified Taking Into Account The Central Hole/Pin). Distance Between Mounting Holes: 90 Mm. Diameter Mounting Bolts: 12 Mm (Holes In Lugs ~12.1–12.2 Mm). Average Part Weight: About 850 – 870 Grams. 54530-3S100 (Basic Original Hyundai/Kia Article) If The Product Does Not Match The Original, The Product Is Returned To The Supplier Within 10 Days Tariff, Rear Suspension Silent Blocks Inner Diameter: Usually 14 Mm (For Arm Mounting Bolts). Outer Diameter: Varies On Average From 40 To 45 Mm (Depending On The Installation Location). Part Weight: From 180 To 310 Grams. Material: Wear-Resistant Rubber Or Polyurethane. The 2015 Grander Rear Suspension Uses Several Types Of Silent Blocks (For Trailing, Transverse And Camber Arms). Popular Manufacturers And Catalog Numbers:Mobis If The Product Does Not Match The Original, The Product Is Returned To The Supplier Within 10 Days Tariff
|
