|
Supply Of procurement of cast steel bolster for vadlapudi project. , centre pivot horizontal liner of lwlh25 bogie as per drg.no. wd-13012-s/05 (sheet 02 of 02),alt.3, item no.-03 specification: as per drg. no. wd-13012-s/05 (sheet 02 of 02),alt.3,item no.- 03 surface.) [ warranty period: 30 months after the date of delivery ] ] , silico-manganese steel liner for brake beam of casnub 22 hs/nl bogie. spec. no.wd- 17-casnub-22hs-bogie-92 rev.3, with 6 amendments: (last amendment no. 6 issued in july20.),wd- 21-casnub-22nlb bogie-93 rev.2 with 6 amendments: (last amend. no. 6 issued in july20) as per d rg. no.rdsos wd-89033-s/1 alt.25 or latest, item no. 08, spec: wd-17-casnub-22hs-bogie-92 rev.3 and wd-21-casnub-22nlb bogie-93 rev.2 with 6 amendments: last july 20. [ warranty period: 30 months after the date of delivery ] ] , nlb/hs pedestal jaw liner size 03 x 30 x 67 mm as per fig. 33 of rdsos casnub bogie manual no. g.95 [rev. 1] amendment no. 5 of jun- 2003 material and specification as per fig. 33v [ w arranty period: 30 months after the date of delivery ] ] , liners 3 x 24 x 105 mm conforming to specn. is:3885 part-1 gr.iv to scr drg no.scr/ c&w/sk-1042, item-2, alt-3 [ warranty period: 30 months after the date of delivery ] ] , liner 5 x 24 x 105 mm conforming to specn. is:3885 part-i gr.iv. to scr drg no : scr/c&w/sk - 1042, item - 1, alt : 3 [ warranty period: 30 months after the date of delivery ] ] , liner 2.5x 23 x 244 mm conforming to specn. is:3885 part-1 gr.iv to drg no.scr/c&w /sk-1042, item-17, alt-2. accepted [ warranty period: 30 months after the date of delivery ] ] , inside column liner size 03 x 10 x 240 mm. as per fig. 25 of rdso casnub bogie manu al no. g-95 [rev. 1 of mar 1997] amendment no. 5 of june 2003. material and specification as per fig. 25 [ warranty period: 30 months after the date of delivery ] ] , outside column liner size 02x25x240 mm. as per rdsos casnub bogie manual no g.95 [rev. 1] fig. 25. amendment no. 5 or latest. material and specification as per dra wing. this item is restricted for procurement from rdso approved sources only.[item is reserve for rdso approved source only rdso item id -3100432 only.] [ warranty period: 3 0 months after the date of delivery ] ] , vertical wear liner for centre pivot bottom to rdso drg. no. wd-97049-s-3, alt.-11, ite m 4 and other technical requirements conforming to rdso specification no.wd-17-casnub-22-hs bogi e 1992, rev.4 of september 2024. rdso item id: 3100432 [ warranty period: 30 months after the d ate of delivery ] ] , land surface liner for bolster to rdsos drg. no. wd-89067-s-4, alt.no.13, item-3 and material to is: 3885-1992 part-i with amendment 1 and 2, grade-iv, 380-420 bhn & other technical re quirements conforming to rdso specn. no. wd-21-casnub-22 nlb-93, rev-2 of july-2002, read wit h all amendments, latest amendment no.6 of july-2020. [ warranty period: 30 months after the date of delivery ] ] , top side bearer liner to rdso drg no. wd-80007-s-08, alt-8, item 4. material a s per is:3885 pt.1 gr.4 (hardness 380-420 bhn) [ warranty period: 30 months after the date of delivery ] ] , pedestal crown roof liner, size: length 145 mm ,width 125mm, thickness 5mm for 22 nlb,hs bogies to fig. no. 28 as per rdso technical pamphlet no. g-95, (rev. 1) of march 1997 with amendment slip no. 5 of june 2003, material: silico-mn-steel, is:3885 pt.-i, gr.-lv. [ warranty period : 30 months after the date of delivery ] ] , kit for casnub bogie liners, consisting of 2 items. [1] side frame friction lin er, to rdso drg. no. sk-69594 alt-36. item no. 7, quantity 1 no/set. [2] bolster liner, to r dso drg. no. sk-77578 alt-5, item no. 2, quantity 04 nos/set [ warranty period: 30 months af ter the date of delivery ] ] , horizontal wear liner for centre pivot bottom to rdsos drg. no.wd- 97049-s-3, alt-11, item-3 and other technical requirements conforming to rdso specification no.wd-17-casnub-22-hs b ogie -1992, rev.4 [ warranty period: 30 months after the date of delivery ] ]
|
