|
Bids Are invited for Custom Bid For Services - ---- - Manufacturing, Supply And Stacking Of Machine Crushed Track Ballast Conforming To Rdso Specification (Irs-Ge-1) With Latest Correction Slips At Railway Depot Or Nominated Location (When Distance Of Nearest Quarry Is More Than 100 Km And Up To 150 Km) , Supply And Laying Of Coarse Sand Including Consolidation With All Labour, Lead, Lift, Tools, Plants, Crossing Of Tracks As Per Drawing And Technical Specification As Directed By The Engineer In Charge In Case Loose Slush Is Encountered At Site Of Foundation Before Casting The Foundation Or Laying The Filtering Media , Supplying & Stacking Of Stone Boulders Weighing Not Less Than 35Kg Each At Specified Bridge Locations , Supplying And Fixing Hsfg Bolts Of Any Dia And Any Length With Suitable Nuts Including Dti Washers Conforming To Irs-B1-2001 For Bridges And Steel Structures With Contractors Labour, Tools And Plants And Lead And Lift Etc., Complete , Metallizing Of Steel Work Of Girders With Sprayed Aluminum After Surface Preparation By Sand/Grit Blasting, Followed By One Coat Of Etch Primer (Is: 5666) & One Coats Of Zinc Chrome Primer (Is: 104) And Two Coats Of Aluminum Paint (Is: 2339) With All Labor, T&P And Material As A Complete Job Duly Conforming To All Relevant Specifications And Process Given Under Clause 39 Of Irs-B1-2001.Note: Nominal Thickness Of Sprayed Aluminum Coating Shall Be 150 Microns. Dft Of Zinc Chrome Primer Shall Be 25-30 Microns And Dft Of Each Coat Of Aluminum Paint Shall Be 12-14 Microns. , Providing And Fixing Various Size Hts Holding Down Bolts Conforming To Relevant Codes/Specification In Concrete Column Or In Other Structures With Proper Nuts, Bolts, Washers/Plates, Grouting Of Holes With Cement Or Epoxy Concrete With All Material, Labour, T&P With Epoxy Concrete Grouting As A Complete Job , Supplying, Fabricating And Fixing Access Ladders, Inspection Platforms, Trolley Refuges Etc., On Bridges With Structural Steel Conforming To Is: 2062 Including Welding / Bolting, Priming Painting With One Coat Of Ready Mixed Paint Of Zinc Chromate (Is: 104) With Dft Of 25-30 Microns Followed By One Coat Of Zinc Chrome Red Oxide (Is: 2074) With Dft Of 25 Microns With All Material, Labor, T&P As A Complete Job.Note: Painting Shall Be Paid Separately Under Item No. 40 As Mentioned Below. , Surface Preparation Of Steel Work Of Bridge Triangulated Girders By Cleaning With Scrappers And/Or Wire Brushes To Remove All Rust And Loose Or Perished Paint To Prepare Perfectly Clean & Dry Bare Metal Surface Free From All Dirt/Foreign Material & Ready For Initial Coat Of Paint. Rate Includes Cost Of Labour, Consumables, Brushes, Misc. Tools And Plants, Ladders, Scaffoldings, Jhoola, Hanging Scaffolding, Staging Etc. For Existing Steel Girders. , Erc , Metal Liner , Gfn Liner , Plate Screw , Fish Plate-1 Mtr. , Joggled Fish Plate , Nut Bolt For Washer For Fish Plate , Nut Bolt With Washer For Heel Block , Nut Bolt With Washer For Heel Block , Nut Bolt With Washer For Heel Block , Nut Bolt With Washer For Heel Block , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Nut Bolt With Washer , Hook Bolt For Channel Bridge , Erc J Clip , Stretcher Bar , Material Trolley , Rail Dolley , Dip Lorry , Replacing Existing Glued Joint Rail With Cut Rails Or With Glued Joint Rail Or Insertion Of Glued Joint By Cutting Existing Track Under Traffic Condition By Cutting Rails, Refixing With All Rail Sleeper Fastenings And Providing Required Gaps For Carrying Out Welding As An Alternative To Drilling Holes Or Joining Rails With Fishplates Duly Drilling Holes As Required Including Stacking Of Released Material And As Directed By Engineer In-Charge , Supply And Fixing Of 10Mm Thick Grooved Rubber Pads As Per Drg. No. Rdso/T-5199 & Rdsos Spec. No. Irs-T-47-2006 (Prov.) From Rdso Approved Sources With All Contractors Lead, Lift, Labor, Tools, Plant And Transportation Etc. Complete As Instructed By Engineer In-Chargenote: One Set Consists Of Two Nos. , Manufacture & Supply Of Elastomeric Pads 25Mm/30Mm Thick As Per Rdso Drawing No. B/1636/I/R2 To Suit Insulated Steel Channel Sleepers From Rdso Approved Sources With All Contractors Material, Lead, Lift, Labour, Tools, Plant And Transportation Etc. Complete And As Instructed By Engineer In-Charge. Note: One Set Constitutes Two Nos. , Supply And Fixing Of A Set Of 02 Nos Of Elastomeric Pads 25Mm / 30Mm Thick And 04 Nos Of Grooved Rubber Pads As Per Rdso Drawing No. B/1636/5 For Insulated H Beam Sleepers From Rdso Approved Sources With All Contractors Material, Lead, Lift, Labor, Tools, Plant And Transportation Etc. Complete As Per Approved Drawings And As Instructed By Engineer In-Charge.Note: One Set Consists Of 2 Nos. Elastomeric Pad 25Mm/30Mm And 4 Nos. Grooved Rubber Pad. , Supply And Fixing Of Galvanized Ms Inner And Outer Clips For Steel Channel Sleeper (Rdso Drg. No. T-6150 & T-6151) From Rdso Approved Sourcesnote: One Set Consists Of Two Inner & Two Outer Clips. , Supply & Fixing Of Galvanized Steel Fittings Of Insulated Galvanized Steel Channel Sleeper For 60 Kg Running Rails & 52 Kg Guard Rail As Per Rdso Drawing No. Rdso/T-5155 To 5164 With Up- To- Date Correction Slips And Specifications From Rdso Approved Sources With All Contractors Lead, Lift, Labor, Tools, Plant, Transportation Etc. Complete And Instructions Of Engineer In-Charge , With One Coat Ready Mix Zinc Chromate Conforming To Is:104 With Dft Of 25-30 Microns Followed By One Coat Of Zinc Chrome Red Oxide Conforming To Is:2074 With Dft Of 25 Microns.
|
