Request For Quotation Purchasing Household Goods. in Kazakhstan

Work Detail

Needle For Stitching Documents. A4 Format. The Texture Is Glossy. Material Steel.Gypsy Needles For Manual Stitching Allow You To Hem Documents With Almost Any Type Of Twine. They Have A Length Of 80 Mm. Diameter - 1.8 Mm. The Set Includes 3 Pieces, Supplied In A Blister With A Euro Pendant. Made From Non-Rusting Steel., The Fittings For A Toilet With A Side Connection Are A Set Of Internal Mechanisms Of A Flush Cistern, In Which Water Is Drawn In Through A Hole In The Side Wall (On The Right Or Left).Purpose And Composition• Main Task: Filling The Tank With Water To The Required Level And Quickly Flushing The Water Into The Toilet Bowl.• Fill Valve (Float): Responsible For Supplying And Shutting Off Water From The Side, Connected To A Flexible Water Supply Line.• Flush (Discharge) Mechanism: Opens The Flush Hole When You Press A Button Or Lift The Stem.• Fastening Kit: Gasket Between The Tank And The Toilet Shelf, As Well As Coupling Bolts.Main Features• Connection Method: The Water Hose Is Connected To The Side Of The Tank (Thread Is Usually 1/2 Or 3/4). • Control Types: There Are Push-Button (Single-Mode Or Dual-Mode With Water Saving) And Rod (Pull-Up).• Noise Characteristics: The Operation Of The Side Fill Is Usually Louder Than The Bottom One, Since Water Is Drawn From Above By An Open Stream (Although Many Models Are Equipped With A Mini-Muffler Hose).• Affordability: This Type Of Design Is Often Found In Inexpensive And Classic Toilet Models; It Is Easy To Install And Configure Yourself. Before Delivery, Agree With The Customer., Lock With Handle For Interior Doors. Main Specification Parameters• Type Of Design: Push (On A Rosette Or On A Strip), Rotary (Knobs/Knobs), Stationary (Brackets, Handrails) Or Mortise For Sliding Doors.• Material Of Manufacture: Zam (Alloy Of Zinc, Aluminum And Copper), Brass, Stainless Steel (For Example, Aisi316), Aluminum.• Finish/Color: Electroplated Multi-Layer Coating (Matte Chrome, Gold, Bronze) To Protect Against Corrosion And Wear.• Purpose: For Interior Doors (Load Up To 40 Kg).• Dimensions And Fit Parameters:O Lever/Handle Length (Usually 120–150 Mm).O Diameter Or Size Of Rosette/Plate (50–55 Mm).O The Cross-Section Of The Connecting Square (Usually 8×8 Mm For Interior Ones, Selected For The Lock).• Contents: Pair Of Handles (On Both Sides Of The Door), Connecting Square, Tightening Screws, Goujons (Fixing Screws), Hex Key.• Regulatory Framework: Compliance With Quality Standards (For Example, The Basic Requirements Of Gost For Fittings)., Awl For Documentscharacteristicshandle Material Wooddimensions: Total Length Of The Awl 12.5 Cm, Handle Length 7 Cm, Tip Length 5.5 Cm, Handle Width (Widest Part) - 2 Cm.

Contact Information