Corrigendum - Quotation Are Invited For Supply & Installation Of Steel Structure Shed in United Arab Emirates

Work Detail

Quotation are invited for Supply & Installation of Steel Structure Shed at-Mushrif. SPECIFICATIONS AND SCOPE#PROVISION OF PROTECTIVE CANOPY AND STRUCTURAL SUPPORT ENHANCEMENT ATMUSHRIF - TRAINING CENTER SUPPLY AND IN STALLATION OF STEEL STRUCTUREOPEN SHED WITH ROOF SANDWICH PANEL: SIZE:19M X 8M X 6M HEIGHTSCOPE OF WORKS:DESIGN, FABRICATION AND INS TALLATION.FOUNDATION, MEP, FIREFIGHTING.MATERIALS USED:·#UB 406MM X 140MM X 46KG STRUT·#UB 305MM X 102MM X 33KGRAFTER·#UB 457MM X 15 2MM X 60KG COLUMN·#UB 152MM X 89MM X 16KG HAUNCH·#MS PLATE 20MM THK BASE PLATE·#MS PLATE 16MM THK CONNECTION PLATE·#L BOLT M20 X 600 MM ANCHOR BOLT·#M20X50MM - 8.8 GRD - HDG CONNECTION BOLT·#M16X50MM - 8.8 GRD - HDG CONNECTION BOLT·#MS ROUND BAR DIA 25MM BRACING·#G I THREADED BAR 20 MM 8.8 GRADE SAG ROD·#Z250X25 PURLIN·#100MM PIR 1MM ALU TOP& BOTTOM ROOF SANDWICH PANELGENERAL WORK:THE CONTRACTOR SHALL ALLOW FOR THE REMOVAL OF ALL RUBBLE AND DEBRIS...ETC FROM SITE PRIOR COMMENCEMENT OF EXCAVATION.SHORING WORK:ALLOW FOR DESIGN , SUPPLY AND INSTALLATION THE REQUIRED SHORING SYSTEM ASREQUIRED BY.DM,RTA OTHER AUTHORITIES INCLUDING GUNITE CONCRETEFOAM/SOLID BLO CK AS REQUIRED ON SITE SUBJECT TO ENGINEER APPROVAL.EXCAVATION AND EARTH WORK:ALLOW FOR EXCAVATING THE SITE TO REQUIRED DEPTH OF FOO TING AS SHOWN INTHE DRAWINGDISPOSAL:ALLOW FOR REMOVE SURPLUS EXCAVATED MATERIAL FROM SITE TO APPROVEDDUMPING AREA.FILLING:ALLOW FOR SUPPLY AND BACK FILL OF APPROVED MATERIAL IN LAYERS NOTEXCEEDING 250MM EACH, LEVELED, WATERED AND COMPACTED TO MINIM 95% M>DDAND SOI L IMPROVEMENT(IF REQUIRED) AS PER SOIL REPORT.COMPACTION:ALLOW FOR COMPACTION BELOW THE NATURAL FOUNDATION ALL IN ACCORDANCE WITHTHE SPECIFICATION AND DRAWING.ANTI-TERMITE TREATMENT:THE PEST CONTROL TREATMENT WITH 20 YEARS WARRANTY, THE APPLY HORIZONTALAND VERTICA L SURFACE.CONCRETE WORKS SUB-STRUCTURE:SUPPLY AND CAST APPLY PLAIN IN SITU CONCRETE WITH COMPRESSIVE STRENGTHOF 180KG/CM2 INCLUDING FROM WORK ,1000 GAUGE POLYTHENE SHEET#ETC., PCCGRADE C15/10 AND RCC GARDE C40COLUMNS & BEAMS SUPPLY AND FIX HIGH YIELD STEEL REINFOR CEMENTCHARACTERISTICS STRENGTH 4600KG/CM2MESH A-252 FOR SLAB ON GRADE.PAINT:ALL STEEL WORK TO BE CORROSION # PROTECTED WITH THE FOLL OWING PAINTSYSTEM:A. SAND BLAST STEEL SURFACE TO SA 2 ½ ROUGHNESS.B. APPLY ONE COAT OF ZINC SILICATE PRIMER TO 60 DFT.C. APPLY TWO I NTERMEDIATE COATS OF HB EPOXY 75 DFTEACH.D. APPLY ONE TOPCOAT OF HW POLYURETHENE TO 50 DFT.E. TOTAL PAINT SYSTEM THICKNESS # 260M D FT.TEMS & CONDITION:1.PAYMENT: 100% COMPLETE WORK2.WORK DURATION :60DAYS3. ALL AUTHORITY APPROVAL FEES AND NOC #S FROM CONTRACTOR SI DE.PAINTS AND COATINGS (ALSAFAAT/LEED)FOR ALL BUILDINGS, INCLUDING NEW APPLICATIONS IN EXISTING BUILDINGS, ALLPAINTS AND COATINGS US ED IN THE BUILDING SHOULD NOT EXCEED THE ALLOWEDLIMITS FOR VOLATILE ORGANIC COMPOUND (VOC) SPECIFIED BY DUBAIMUNICIPALITY. THE PAINT S AND COATINGS MUST BE ACCREDITED / CERTIFIEDFROM DUBAI CENTRAL LABORATORY OR ANY OTHER LABORATORY, APPROVED BY DUBAIMUNICIPALITY. F OR MORE DETAILS REFER TO PART H OF DUBAI BUILDING CODE(H.4.10.3 INDOOR AIR QUALITY). Qty: 1 DESIGN, FABRICATION, SUPPLY AND INSTALLATION OF STEEL STRUCTURE OPENSHED WITH ROOF SANDWICH PANEL INCLUDING CIVIL WORKS REFER LAYOUT &SPECIFICATION. (19MTRX8MTR) Qty: 156 100 THICK OF RCC POWERFLOATED FLOORING WITH EPOXY PAITING FINI. THEREADY MIX CONCRETE USING CEMENT NOT LASS THAN 370KG/M3 TWO LAYER OF BRCMESH A-252.IN ABOVE THE INTERLOCK WITH EPOXY PAINT FINISH, AS PERDRAWING AND SPECIFICATION TO THE DEWA ENGINEER SATISFACTION. Qty: 156 Supply & Installation of steel structure shed at-Mushrif. Contact: Mr.Manikandan/ 0509667812 Payment Terms: 5% retention. Site Visit Date: 23.09.2026 STANDARD TERMS & CONDITIONS 1) Prices should be DDP delivery duty paid at DEWA stores. 2) Quotation to be submitted only in local currency U.A.E Dirhams 3) DEWA Standard payment terms is 30 days credit from the date of acceptance of material 4) No DEWA staff or his or her relatives up to third degree should have ownership or partnership in your company, and your participation in DEWA tenders / RFQs should not constitute a Conflict or perceived Conflict of Interest. Supplier Registration: https://srm.dewa.gov.ae/irj/portal/anonymous/regis Tender Link : https://srm.dewa.gov.ae/sap/opu/odata/sap/ZSRM_RFX_REG_BID_SRV/AttachmentSet(2332602336)/$value

Contact Information