+91-9769152129

Tender For Steel Rate Contract - Qtr Iii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils in India

Tender Notice
TenderID	118399193
Tender Brief	Tender For Steel Rate Contract - Qtr Iii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils
Competition Type	ICB/NCB (Plz Refer Document)
Funded By	Self-Funded
Country	India
Tender Value	Plz Refer Document
Tender Value In USD	Plz Refer Document

Key Dates
Publish Date	21 Sep 2026
Last Date of Bid Submission	28 Sep 2026

CPVs
	42600000-Machine tools

Other Detail
View Original Tender Notice / Tender Document

Work Detail
Tender for Steel Rate Contract - Qtr Iii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X700 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 700 X Coil Form [T X W X L] [Mm] , Cr Coil 0.63X813 X Coil Form; Is 513 Dd; Tdc:Rta:408; 0.63 X 813 X Coil Form [T X W X L] [Mm] , Cr Coil 0.63X915 X Coil Form; Is 513 Dd; Tdc:Rta:408; 0.63 X 915 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Cr Coil 0.80X650 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 650 X Coil Form [T X W X L] [Mm] , Cold Rolled Coil 1.25 X 903 Is 513 Gr.Cr3 Tdc:Rte:257 Rev:04; 1.25 X 903 X Coil Form [T X W X L] [Mm] , Cr Sheet 1.6 Mm Is 513 Cr2 - Kld; 1.6 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 1.6 Mm Is 1079 Gr.Hr2 Sk/K; 1.6 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2 Mm Is 5986 Gr 205; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 1250 X 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr1 Sk/K; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr2 Sk/K; 2 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2.5 Mm Is 5986 Gr 205; 2.5 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2.5 Mm Is 1079 Gr.Hr2 Sk/K; 2.5 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , 3.0 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 3 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheet 3.15 Mm Is 5986 Gr 205; 3.15 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr1 Sk/K; 3.15 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr2 Sk/K; 3.15 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 4.0Mm Is 5986 Gr 205; 4 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 4 Mm Is 1079 Gr.Hr2 Sk/K; 4 X 900 = W = 1250 X L = 2500 [T X W X L] [Mm] , Pl 4 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 4 (T) X 900/ 1200/ 1235/ 1500 (W) X 2500 (L) [Mm]; 4 X 900/1200/1235/1500 X 2500 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 5 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 5 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Cq Pl 5 Mm Is 3502; 5 X 900 = W = 1250 X L = 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:386; 5 (T) X 1500 = W = 1800 (W) X (6300-12000) (L) [Mm]; 5 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 5 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 5 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 5 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 6 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Pl 6 Mm Is 2062 E 250 Gr A/Br/Sk/K; 6 X W = 1250 X L = 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr B0/K Tdc:301; 6 (T) X 1500 = W = 1800 (W) X (6300-12000) (L) [Mm]; 6 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 6 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Cq Pl 6 Mm Is 3502; 6 X 900 = W = 1250 X L = 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K ; Tdc:301 ; 6 (T) X 1500 = W = 1800 (W) X (6300-12000) (L) [Mm]; 6 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 (T) X 2000 (W) X (6300-12000) (L) Mm; 6 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 6 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 6 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 6 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 6 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 6 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 6 X 1200/1235/1500 X 6500 [T X W X L] [Mm] , Pl 7 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 7 X 1500 = W = 1800 X L = 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 8 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 8 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12, Width 2500 Mm, Length 9000 Mm; 8 X 2500 X 9000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 2900 X 10000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 8 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Cq Pl 8 Mm Is 3502; 8 X 900 = W =1250 X L = 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:301; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386,; 8 X 2500 X 12000 [T X W X L] [Mm] , Plate 8.00 Mm - Sa515gr70; 8 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 8 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 8 (T) X 1200/ 1235/ 1500 (W) X 7500 (L) [Mm]; 8 X 1200/1235/1500 X 7500 [T X W X L] [Mm] , Pl 8 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 8 (T) X 1200/ 1235/ 1500 (W) X 6500 (L) [Mm]; 8 X 1200/1235/1500 X 7500 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr Br/K Tdc:386; 10 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 10 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 10 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc 301 , Width 2000Mm, Length 12000 Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L); 10 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:301; 10 (T) X 2000 (W) X (6300-12000) (L); 10 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 10000Mm; 10 X 2500 X 10000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Cq Pl 10 Mm Is 3502; 10 X 900 = W =1250 X L = 6300 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 (T) X 2000 (W) X (6300-12000) (L) Mm; 10 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br./K; Tdc:386 + Normalizing Rolling; 10 (T) X 2500 (W) X 12500 (L) [Mm]; 10 X 2500 X 12500 [T X W X L] [Mm] , Pl 10 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 10 X 2500 X 6500 [T X W X L] [Mm]; 10 X 2500 X 6500 [T X W X L] [Mm] , Plate 10.0 Mm - Sa515gr70; 10 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 10 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 10 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 10 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 10 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 10 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 10 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr Br/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm; 12 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 12 X W= 2500 X 1000 = L = 12500 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 12 X 2500 X 12000 [T X W X L] [Mm] , Pi 12 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 12 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 (T) X 2000 (W) X (6300-12000) (L) Mm; 12 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br./K; Tdc:386 + Normalizing Rolling; 12 (T) X 2500 (W) X 10000 (L) [Mm]; 12 X 2500 X 10000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr B0/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 12Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure- 1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 12 X 3000 X 8000 L 12000 [T X W X L] [Mm] , Plate 12.0 Mm - Sa515gr70; 12 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 12 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 12 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 12 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 12 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 12 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 12.7 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [Mm] , Pl 14 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 14 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 14 X 2500 X 6500 [T X W X L] [Mm] , Plt Bq 14 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) +Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 14 X 2000 X 8000 [T X W X L] [Mm]; 14 X 2000 X 8000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 16 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 X 1500 = W = 1800 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 16 X 2500 X 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:301; 16 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 16 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 16 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 16 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr Br/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 16 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250 Gr Br_Tdc:6:386 Rev 03; 16 X 3400 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K; Tdc:386 + Normalising + Ust As Per Astm A578 Level B, 16 (T) X 2500 (W) X 12500 (L) [Mm]; 16 X 2500 X 12500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr B0/K Tdc:386; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70- Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 16 X 2000= W =2500 X 8000 = L =12500 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 5700 [T X W X L] [Mm]; 16 X 2500 X 5700 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 7500 [T X W X L] [Mm] , Pl 16 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 16 X 2500 X 6300 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2000 X 10000 [T X W X L] [Mm; 16 X 2000 X 10000 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2500 X (6300 = L = 10000) [T X W X L] [Mm]; 16 X 2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 16 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 16 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 16 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 16 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 16 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 16 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 18 Mm Is2062 E350 Gr Br/K Tdc:301; 18 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 18 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 20 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Plate-20 Is2062 E250br Tdc:301 Rev 12; 20 X 2500 X 7925 [T X W X L] [Mm] , Pi 20 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 20 X W= 2500 X L = 12000 [T X W X L] [Mm] , Plate 20.0 Mm; Is2062e350 Gr B0; Tdc:6:386:Rev:03: 20 X 2500 X (10000-12000) (T X W X L) Mm; 20 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 20 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 20 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:301; 20 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 20 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr. Br; Tdc 301; 20 (T) X 2500 (W) X 11425 (L) [Mm]; 20 X 2500 X 11425 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr Br/K Tdc:301; 20 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 20 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 (T) X 2000 (W) X (6300-12000) (L) Mm; 20 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 (T) X 2500 (W) X (6300-12000) (L) Mm; 20 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 X 2500 X 7100 [T X W X L] [Mm]; 20 X 2500 X 7100 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K; Tdc:386 + Normalising + Ust As Per Astm A578 Level B, 20 (T) X 2500 (W) X 12500 (L) [Mm]; 20 X 2500 X 12500 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0/K Tdc:386; 20 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 20 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0; Tdc:386; 20 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 20 X 2200 X (10000-12000) [T X W X L] [Mm] , Plate 20.0 Mm - Sa515gr70; 20 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 20 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 20 X 2500 X 6300 [T X W X L] [Mm] , Pl 20 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 20 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 20 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 20 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 20 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 20 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 22 Mm A515 Grade-70; Aa10404; 22 X 3000 X 10000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:386; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 25 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 25 X 2000 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 25 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 25 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 25 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:301 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K; Tdc 301 + Ust As Per Astm A435, 25 (T) X 2500 (W) X 12500 (L) [Mm]; 25 X 2500 X 12500 [T X W X L] [Mm] , Pl.25 X 2500 X 12000 Is 2062 E250 Gr. Br. Tdc 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) Mm; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr B0/K Tdc:386; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Plate 25.0 Mm - Sa515gr70; 25 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 25 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Charpy-V-Test (Longitudinal / Transverse Sample) Shall Be Performed Getting Values Of Kv 27 J At -20°C Or Kv 34 J At 0°C Or Kv 40 J At 20°C .; 25 X 3100 X 6700 [T X W X L] [Mm] , Plt Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 2500 X 13000 [T X W X L] [Mm]; 25 X 2500 X 13000 [T X W X L] [Mm] , Pl Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 2500 X 10000 [T X W X L] [Mm]; 25 X 2500 X 10000 [T X W X L] [Mm] , Pl 25 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 25 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 25 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 25 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 25 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 25 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 28 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 28 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 28 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0; Tdc:386; 28 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 28 X 2200 X (10000-12000) [T X W X L] [Mm] , Plt Bq 28 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 28 X 2500 X 13000 [T X W X L] [Mm]; 28 X 2500 X 13000 [T X W X L] [Mm] , Pl 30 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;30 Mm X 1500 Mm X 8000 Mm : T X W X L (Mm); 30 X 1500 X 8000 [T X W X L] [Mm] , Pi 30 Mm Is2062 E250 Gr Br Tdc:6:386 Rev 03; 30 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Plate 30.0 Mm - Sa515gr70; 30 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 30 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 30 X 4000 X 6750 [T X W X L] [Mm] , Pl 30 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 30 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 30 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc:6:386 Rev 03; 32 X 2000 = W = 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435,Width 2500 Mm, Length 12500 Mm; 32 X W = 2500 X L = 12500 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 32 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 32 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr. Br/K Tdc 301; 32 (T) X 2500 (W) X 7500 (L) [Mm]; 32 X 2500 X 7500 [T X W X L] [Mm] , Plate 32.0 Mm - Sa515gr70; 32 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 32 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 32 X 2500 X 6300 = L = 10500 [T X W X L] [Mm] , Pl Bq 32Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 32 X 2500 X 10000 [T X W X L] [Mm]; 32 X 2500 X 10000 [T X W X L] [Mm] , Pl 32 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 32 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 32 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 32 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 32 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 32 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Pi 34 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 34 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 34 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 34 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 35 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;35 Mm X 1500 Mm X 8000 Mm : T X W X L (Mm); 35 X 1500 X 8000 [T X W X L] [Mm] , Plate 35.0 Mm - Sa515gr70; 35 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435, Width 2500Mm, Length 12500Mm; 36 X W=2500 X L =12500 [T X W X L] [Mm] , Pi 36 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 36 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 36 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 36 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 36 Mm (Sa387 Gr22 Class 2 - Non Ibr); Tdc: Aa10648; 36 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 9000/ 10000 (L) [Mm]; 36 X 1200/1235/1500/2000/2500 X 6000/9000/10000 [T X W X L] [Mm] , Plate 38 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 38 X 2500 X (10000-12000) (T X W X L) Mm; 38 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 40 X W=3200 X L=6300 [T X W X L] [Mm] , Pi 40 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr Br/K Tdc 301 Rev12 + Ust As Per Standard En 10160, Class S2/E2, Width 3200 Mm, Length 8000 Mm; 40 X 3200 X 8000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;40 Mm X 2500 Mm X 7500 Mm : T X W X L (Mm); 40 X 2500 X 7500 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 40 X 2500 X 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [Mm] , Plate 40.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K; Tdc 301 Rev 12 + Ust As Per Astm A435, 40 (T) X 3200 (W) X 6300 (L) [Mm]; 40 X 3200 X 6300 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E250grbr; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Plt Bq 40 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 40 X 2500 X 9000 [T X W X L] [Mm]; 40 X 2500 X 9000 [T X W X L] [Mm] , Plate 40.0 Mm - A515gr70 + Ibr Requirement; 40 X 1000-2500 X 5000 = L = 10000 [T X W X L] [Mm] , Pl 40 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 40 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 40 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 42 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;42 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 42 X 1800 X 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 45 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br.K Tdc 301 Rev 12;45 X 2500 X 6300-12000; ( T X W X L) Mm; 45 X 2500 X 6300 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;45 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 45 X 1800 X 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 45 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 45 X W= 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 45 X 2500 X 12000 [T X W X L] [Mm] , Plate 45.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 45 X 2500 X (10000-12000) (T X W X L) Mm; 45 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E350 Gr B0; Tdc:386; 45 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 45 X 2000 X 10000 = L = 12000 [T X W X L] [Mm] , Plate 45.0 Mm - Sa515gr70; 45 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 45 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 45 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 45 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 48 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;48 Mm 1800 Mm 10500 Mm : T X W X L (Mm); 48 X 1800 X 10500 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 50 X W= 2500 X 10000 = L = 12500 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 50 X W = 3200 X L = 7000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;50 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 50 X 1800 X 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0; Tdc:386; 50 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 50 X 2000 X 10000 = L = 12000 [T X W X L] [Mm] , Plate 50.0 Mm - Sa515gr70; 50 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 50 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 50 X 2500 X 6300 [T X W X L] [Mm] , Pl 50 Mm (Sa387 Gr12 Class 2 - Non Ibr); Tdc: Aa10647; 50 (T) X 1200/ 1235/ 1500/ 2000/ 2500 (W) X 6000/ 7500/ 9000/ 10000 (L) [Mm]; 50 X 1200/1235/1500/2000/2500 X 6000/7500/9000/10000 [T X W X L] [Mm] , Pl 52 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;52 Mm X 1800 Mm X 12000 Mm : T X W X L (Mm); 52 X 1800 X 12000 [T X W X L] [Mm] , Plate 55.0 Mm - Sa515gr70; 55 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 56 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 56 X 2500 X 12000 [T X W X L] [Mm] , Pi 56 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 56 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 56 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 56 X 2500 X 12000 [T X W X L] [Mm] , Plate 56 Mm; Is2062 E250gr Br; Tdc::301:Rev:12: 56 X 2500 X (10000-12000) (T X W X L) Mm; 56 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Plate 56 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 56 X 2500 X (10000-12000) (T X W X L) Mm; 56 X 2500 X 10000 = L = 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E350 Gr B0; Tdc:386; 56 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 56 X 2200 X (10000-12000) [T X W X L] [Mm] , Pl 56 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 56 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 56 X 2500 X 6500 [T X W X L] [Mm] , Pi 60 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 60 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Plate 60.0 Mm - Sa515gr70; 60 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 63 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 63 X W=2500 X L =8000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;63 Mm X 2500 Mm X 9500 Mm : T X W X L (Mm); 63 X 2500 X 9500 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 63 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 63 X 2500 X 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr B0; Tdc:386; 63 (T) X 2200 (W) X (10000-12000) (L) [Mm]; 63 X 2200 X (10000-12000) [T X W X L] [Mm] , Pl 63 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) Are In Mm]; 63 X 3600 X 7800 [T X W X L] [Mm] , Pl 63 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 63 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 63 X 2500 X 6500 [T X W X L] [Mm] , Plate 63.0 Mm - Sa515gr70; 63 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12;Tdc:301 Rev 12; 63 X 2500 X [6300-12000] (T X W X L) Mm; 63 X 2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 70 Mm Is 2062 E 250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 70 X W=2500 X L =8000 [T X W X L] [Mm] , Pl 70 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;70 Mm X 2000 Mm X 8500 Mm : T X W X L (Mm); 70 X 2000 X 8500 [T X W X L] [Mm] , Pl 70 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 70 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 70 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 70 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Plate 70.0 Mm - Sa515gr70; 70 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 75 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 75 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pi 75 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 75 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;80 Mm X 2500 Mm X 7000 Mm : T X W X L (Mm; 80 X 2500 X 7000 [T X W X L] [Mm] , Pl 80 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 80 X 2000= W = 2500 X 6000 = L = 12000 [T X W X L] [Mm] , Pl 80 Is 2062 E250gr-Br/K, Tdc:301, 80 X 2500 X 7650 [T X W X L] [Mm]; 80 X 2500 X 7650 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435; 80 (T) X 2500 (W) X 10000 (L) [Mm]; 80 X 2500 X 10000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 80 X 2850 X 10700 [T X W X L] [Mm]; 80 X 2850 X 10700 [T X W X L] [Mm] , Pl 80 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 80 X 2500 X 8000 = L = 10000 [T X W X L] [Mm] , Pl 80 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 80 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 80 X 2500 X 6500 [T X W X L] [Mm] , Plate 80.0 Mm - Sa515gr70; 80 X 2000-2500 X 6300 = L = 10000 [T X W X L] [Mm] , Pl 85 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 85 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 90 Mm Is 2062 E 250 Gr Br/K; Tdc:301; 90 X 3000 X 6300 = L = 12600 [T X W X L] [Mm] , Pl 90 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 90 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 90 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 90 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 90 X 2500 X 6500 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E 250 Gr Br; 100 X 3000 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E250 Gr Br; 100 X 2500 X 6000 L 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;100 Mm X 2500 Mm X 12000 Mm : T X W X L (Mm); 100 X 2500 X 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B + Through Thickness Tension Testing To Quality Class Z25 (As Per En10164); 100 (T) X 2500 (W) X 11000 (L) [Mm]; 100 X 2500 X 11000 [T X W X L] [Mm] , Pi 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X W= 4400 X L= 4600 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 100 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X 2500 X 6000 [T X W X L] [Mm]; 100 X 2500 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) Are In Mm]; 100 X 2200 X 4800 [T X W X L] [Mm] , Pl 100 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1); 100 X 2200 X 10000 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 250 Gr A/Br/Sk/K; 110 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 110 X 2000= W = 2500 X 6000 = L = 12000 [T X W X L] [Mm] , Pl 110 Mm Is2062 E350 Gr Br/K Tdc:301; 110 (T) X 2850 (W) X (6300-12000) (L) [Mm]; 110 X 2850 X 6300 = L = 12600 [T X W X L] [Mm] , Pl 110 Mm Is2062 E250 Gr Br./K Tdc:386; 110 (T) X 2500 (W) X 10000 (L) [Mm]; 110 X 2500 X 10000 [T X W X L] [Mm] , Pl 110 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 1650 ; L= 8000;[Thickness, Length (L) & Width (W) Are In Mm]; 110 X 1650 X 8000 [T X W X L] [Mm] , Pl 110 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 110 X 2000= W =2500 X 6000 = L = 8000 [T X W X L] [Mm] , Pl 115 Mm Is 2062 E 250 Gr A/Br/Sk/K; 115 X 2000 = W = 2500 X 8000 = L = 12000 [T X W X L] [Mm] , Pl 115 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 115 X W = 2500 X L = 10000 [T X W X L] [Mm] , Pl 120 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 120 X 2000= W = 2500 X 6000 = L = 12000 [T X W X L] [Mm] , Pl 120 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 10000;[Thickness, Length (L) & Width (W) Are In Mm]; 120 X 2500 X 10000 [T X W X L] [Mm] , Pl 130 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;130 Mm X 2500 Mm X 6000 Mm : T X W X L (Mm); 130 X 2500 X 6000 [T X W X L] [Mm] , Pl 130 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [Mm] , Pl 140 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) Are In Mm; 140 X 2000 X 10500 [T X W X L] [Mm] , Pl 190 Mm Is2062 E350 Gr C Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A435, 190 Mm X 2250 Mm X 6300 Mm T X W X L (Mm); 190 X 2250 X 6300 [T X W X L] [Mm]

Contact Information
Contact Person	NC Sharma
Address	NA

View Notice Now...

Fill Detail for Getting Instant Access

Tell us about your Product / Services,
We will Find Tenders for you