|
Tender for Procurement Of Different Alloy Ci Pipe Bends And Fittings Of U#3,4,5&6 Under Ahm-Ktps. , Combine Tube,8 Inch With 5 Inch Throat For Bottom Ash Hopper Pt.01,High Chrome Class-Iii,Bhn 550(Min) Additional Data: Required For U#3,4,5,6 Bottom Ash System , Bend,250 Nb 60Deg,Alloy Ci Bhn-450 Drg No.Dcm-061-503/2 Additional Data: With Ends Bevelled Required For U#4,5,6 Dry Ash System , Elbow,250 Nb 30Deg For Ash Conveying Line Drg No.Dcm-061-501/2 Additional Data: Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3 Bottom Ash System & U#4,5,6 Dry Ash System , Bend,300Nb 90Deg For Dry Ash Sy Matl,Drg No-526-40/416-01 Additional Data: Bend Radius:-900Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Dry Ash System And U#3 Slurry Lines. , Elbow,Alloy Ci,90Deg,350Nb,450Bhn For Fa Dry Conveying Linemoc- Ni-Chrome-Alloy Cast Iron, Min Hardness 450 Bhn Additional Data: Bend Radius:-1035Mmrequired For U#3,4,5,6 Dry Ash System And U#3Slurry Lines. , Elbow,400 Nbx90 Deg For Ash Disposal Pipe Additional Data:Bend Radius:-1200Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Slurry Lines , Elbow,Semi Sweep,8 Inch # Aloy Ci/Durite Bhn-450# For Air Separator Inlet/Outlet Additional Data:Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Wet Ash System , Elbow,250 Nbx45 Deg,Durite Fittings # Additional Data: Bend Radius:-750Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Bottom & Fly Ash System , Elbow,90 Deg,200Nb Indure Elbow,90 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,90 Deg,250Nb Indure Elbow,90 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Elbow,45 Deg,200Nb Indure Elbow,45 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,45 Deg,250Nb Indure Elbow,45 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Reducer,Size:250-200 Nb, For Ahp Ci Line Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450;Bhn,Drawing No:-I-5034-M-Ga-077Sheet 1 Of 1 Additional Data:Overall Length:-762Mm D1=232Mm,D2=274Mm Required For U#3 Fly Ash System , Reducer,Ci,Hydraulic Ejector Bottom Ash System Additional Data: Overall Length=500Mm D1=222Mm,D2=274Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5&6 Bottom Ash System , Bend,200Nb 45Deg For Dry Ash Sy Matl Additional Data:Bend Radius:-600Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Fly Ash System , Ci 3-Way Conn,250Nb special For Fly Ash Vacuum Line Additional Data: Overall Length=700Mm All Ends Are Bevelled Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Fly Ash System , Bolt Hx-Hd Hi Tensile M8x60 Pt ( Gr 10.9 )Lateral,250 X 250 X 250Nb 45° Y Additional Data: Overall Length=1000Mm Required For U#3,4,5&6 Fly Ash System
|
