Tenders Are Invited For Reconstruction Of Rooms In The Railway Station Building In Brusy, Including Landscap ... in Poland

Work Detail

1. The Subject Of The Order Is The Implementation Of Construction Works Consisting In The Reconstruction Of Rooms In The Building Of The Railway Station In Brusy Along With The Development Of The Area And The Necessary Infrastructure For Passenger Service As Part Of The Task Expansion Of The Integrated Stop In Brusy Co-Financed Under The European Funds For Pomerania 2021-2027 Program, Priority 3. European Funds For A Mobile Pomerania, Measure 3.1. Urban Mobility Of A Regional Program Co-Financed By The European Regional Development Fund. 2. The Subject Of The Order Includes: 1) Development Of The Area Around The Railway Station And Expansion Of The Parking Lot At Ul. Nadcem, Including: A) Demolition Of Three Railway Buildings, B) Construction Of An Internal Road, Pedestrian Paths, Exits, Parking Spaces For Buses, Bus Platforms, Parking Spaces For Passenger Cars, Correction Of The Curve Of The Road Ul. Nad Dworcem Next To The Expanded Parking Lot, C) Construction Of A Storm Sewage System Draining The Area With Drainage Of Rainwater To The Existing Rain Collector In Ul. Nad Dworcem And Ul. Młyńska, D) Inclusion Of The Designed Rainwater Sewage Network In Existing Concrete Wells: - Reveal And Inventory The Results; Supervision Before Commencing The Works. Make A Hole In The Chamber Wall Only By Drilling With A Diamond Drill Bit With A Diameter Adapted To The Tight Passage Used. Chipping Out The Chamber Wall Is Not Allowed. Place A System Tight Passage For Concrete Chambers In The Hole (Sleeve/Insert With An Elastomer Seal), Matched To The External Diameter Of The Pipe. Fill The Space Around The Sleeve With Low-Shrinkage Mortar (Assembly), From The Inside, Make It Tight And Smooth. Make The Inlet Elevation In Accordance With The Longitudinal Profile; The Bottom Of The Inlet Pipe Cannot Be Below The Bottom Of The Base. If The Difference In The Elevations Of The Inlet And The Bottom Of The Base Exceeds 0.5 M, Make A Cascade Connection (External Cascade Of A Pipe With The Diameter Of The Conduit, Elbow At The Base, Concreting). Re-Profile The Base Of The Existing Well. (Rebuild/Form With Waterproof Mortar) To Ensure A Smooth Connection Of Flow Directions Without Backflow And Deposition Of Contaminants. After Completing The Connection, Carry Out A Tightness Test According To Pn-En 1610 And Cctv Inspection Of The Connected Section Together With The Connection Node; Restore Protective Coatings In The Place Of Interference. Carry Out The Works While Ensuring The Continuity Of Rainwater Collection From The Existing Catchment Area (If Necessary). Temporary Pumping), In Compliance With Occupational Health And Safety Regulations Regarding Work In Confined Spaces. E) Construction Of New Lighting, F) Removal Of Interference With The Existing Enea Energy Network, G) Removal Of Interference With The Existing Pkp Lighting Network, H) Reconstruction Of The Telecommunications Infrastructure Of Orange Polska S.A., Telsat, Pkp Plk S.A. Which Interferes With The Ex

Contact Information