Tender For Furniture Supply, Installation, Testing and Commissioning of Hospital and office furniture at dif ... in India

Work Detail

Supply, Installation, Testing and Commissioning of Hospital and office furniture at different Hospitals across Gujarat.- providing and supplying fully motorized bed should have 6 ± 1 function bed, 6 embedded control panel + 1 act panel intensive care unit bed with back rest up down, knee rest up-down, trendelenburg and reverse trendelenburg, hi-low position, lateral tilt controlled through electro mechanical actuators operated using soft touch control panel including 100 mm thick 40-density pu foam, 4-section, antibacterial rexine cover and fr grade .the embedded control panels are placed: 4 nos at the head boards mendatory and 2 nos at the leg boards or 2 nos outer side along with one remote at leg board side. nurse embedded panel should have features like backrest, leg-rest, high-low, tr/atr, auto cpr, single button cardiac chair position, shock position, auto-contour and locking features.patient embedded panel should have features like backrest, leg-rest, high-low.. the digital attendant control touch panel mounted on leg-board can be used to operate functions such as backrest, leg-rest, high-low, tr/atr, auto cpr, single button cardiac chair position, shock position,( optional - lateral tilt ), auto-contour , weight measurement, under bed light, out of bed alarm and locking features.the lateral tilt feature can only be operated when the sideboards are up / engagged to prevent patient fall, when the lateral tilt orientation is shifting from right to left/left to rght there should be a pause of 4 seconds and beep sound as a safety feature. base frame is made of 30mmx 60mm 2mm thick ms crca rectangular tube with the bed frame of 50x 25mm and 40 x20mm, 2mm thick ms crca rectangular tube.. the embedded control panel iccu bed has four section lying surface with abs vacuum formed with antimicrobial property which should be easily removable, washable to maintain hygiene with integrated mattress retainer.the bed has four numbers of pp moulded / alluminium / hdpe side boards with embedded control panels (2 nos for patient and 4 nos for attendant) and drop-down mechanism, completely collapsible , the side boards should be air mattress comaptible and height of the side boards should be more than 400 mm.there are 4 nos of bumpers given at the four corners made up of tpe ( thermo plastic elastomer) with excellent shock absorbing property.there are two nos of cpr lever, one at either side of the bed for quick release of the back rest during emergencis. in order to achieve the deep vein thrombosis (dvt) position, the lower leg rest portion of the bed frame has the provision of a ms zinc plated ratchet. the ratchet is adjustable in five different positions.technical details:· overall length: <2200mm· overall length (with extended): <2380mm· overall width :1010mm· height range: 500 mm to 860 mm without mattress.· trendelenburg: 0°-12° (+/-1°)·reverse trendelenburg: 0°-12° (+/-1°)· backrest angle (max.) : 0°-66° (+/-5°)· leg rest angle (max.): 0°-24°(+/-5°)· lateral tilt: 0-17° (+/-2°)· castor diameter: 125mm· under bedclearance: 150mm· safe working load (with accessories) : 250kg the bed shoud have single button auto contour, single button shock position and single button cardiac chair position on embedded panels. the bed has a double auto regression feature during backrest operation to minimize abdominal pressure of the patient.the head board and leg board are of with 3mm wall thickness. the head board, leg board and side boards has provision for colour stickers and made of moulded pp with antibacterial additives. both the head and leg board are removable without locking mechanism for ease of use during emergency. there are four nos of nylon moulded patient lifting pole holders and heavy duty saline stand holders provided at the four corners of the bed.the bed is provided with 125mm plastic injection moulded twin wheel castors with central and directional locking facility. the castors are provided with an auxiliary brake made of ms round tube. it has accessories like urine bag holders; ms chrome plated linen tray and provisions for bed extension up to 180mm.electrical details:. classification: class 1· electrical shock protection: type b· liquid ingress protection: actuators - ipx4 · control box - ipx6 washable:· battery (optional) – ipx6 · battery type (optional): lead acid battery, rechargeable, 1.2- hrs / 28.8wh. all the ms parts are treated with seven pre-treatment procedures with zinc phosphate and powder coated with antimicrobial and thermosetting epoxy polyester to control the bacterial growth.bed is provided with telescopic heavy-duty iv pole. this ss made iv pole is of ms frame and ss made saline stand which can be fitted on the bed.the bed has provision for patient retainers. ingress protection of bed should be ipx4. the bedshould have weight measurement system consisting of 4 numbers shear beam load cells and linak® scale system compatible with linak® open-bus platform. the weightmanagement system should have the following features:1) measuring range: 0 to a max 250 kgload on application (swl)2) safety key- magnetic safe key to activate act for weight management, trend/anti-trend, lateral tilt, cardiac chair position and out of bed alarm.3) accuracy adjustment: 100 or 500 gm of measured weight4) auto compensationfeature5) reset/zero adjustment (to omit weight of mattress) = 50 kg6) out of bed detection/alarm feature for patient leaving the bed.7) weight unit selection:kg/lbs.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.fully ± 5 percentage tolerance in length, width and height will be considered., supply, assembly and placement of motorised icu bed with remote control panels .the bed is compliant with iec 60601-2-52 standards and compliant with current protection level of class 1 and shock protection level of class b, including 100 mm thick 40-density pu foam, 4-section, antibacterial rexine cover and fr grade. all the electrical parts should have the liquid ingress protection as per ipx4. five electric operated features are backrest, leg rest , high-low, trendelenburg, reverse trendelenburg(only one handset will be provided).the bed is provided with 4 nos aluminium extrusion / hdpe /pp side boards with pp molded end caps with full coverage to bed. these side boards should be integrated with drop down mechanism for easy operation. pp moulded easily removable headboard and leg-board. head board and foot board should be with metal inserts to mount it on bed frame. removable pp head board and foot board should have cut out , for better gripping. bed with 3 or 4 nos removable pp / hdpe lying surface (pelvic, upper leg and lower leg rest).backrest is x-ray permeable with cassette holder made of compact laminate.bed frame should be made of ms erw tube of size 50mmx25mm of 2 mm thick supported with erw square tube with 25 mm x 25 mm and 1.2 mm thick. base frame made of ms erw tube of size 30mmx60mm of 2mm thick. base frame have ground clearance of greater than 150 mm to avoid any obstruction during bed movement. base frame have provision to mount oxygen cylinder cage as optional accessory. it should have angle and trendelenburg indicator guide.bed with 4 nos tpe (thermoplastic eleastomer) bumpers to absorb shock .bed with manual and automatic cpr lever, bed is with manual dvt position on ratchet.the bed has powder coated urine bag holder on both side of the bed for ease of accessibility. all metal components are pre-treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating.technical details:·overall length: 2241mm overall width: 1050mm height range: 350 mm to 700 mm without mattress.trendelenburg: 0°-12° (+/-1°) reverse trendelenburg: 0°-12° (+/-1°) backrest angle (max.) : 0°-65° (+/-5°) leg rest angle (max.):0°-30°(+/-5°) castor diameter: 125mm under bed clearance: 150mm safe working load (with accessories) : 200kgthe bed provided with 125mm plastic injection moulded twin wheel castors with diagonal locking facility. it has accessories like urine bag holders; electrical details:classification: class 1· electrical shock protection: type b liquid ingress protection: actuators - ipx4 control box - ipx6 washable: battery (optional) – ipx6 ( optional) batteries: lead acid battery, rechargeable, 1.2- hrs / 28.8wh.bed should have the liquid ingress protection as per ipx4.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.fully ± 5 percentage tolerance in length, width and height will be considered., providing and supplying fowler bed should have overall dimension: (l) 2138 x (w) 908 x (h) 559mmfunctions : two function bed with adjustable backrest 70deg and upper leg rest 24deg detectable head & foot bows or upper raised kneerest angle - 50degree and foot board : 25.4 mm dia 1.2 mm thick ss202 made tube with 18 mm thick plt board.bed frame : bed frame is made of ms erw rectangular section tube of size 30mmx60mm of 1.6mm thick. . it has provisionision 4 iv pole holders . it is strengthened by rectangular tube section of size 60mmx30 mm having 1.6 mm thicknessleg under structure : erw round tubes used with thickness of 1.2mm with section 31.75 mm dia.lying surface : lying surface made of ms erw of thickness of 1.0 mm thick . this lying surface have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. lower leg rest section is provisioned with ratchet for leg rest adjustment. mattress platform is strengthened by tubular frame of size 25.4mm dia x 1.2mm thickness. it is strengthened by trapezoidal contour ( rounded corner ) 16 nos, embossed cut out. all metal components are pre treated with zinc phosphating and then powder coated with epoxy polyester powder coating. mechanism: all functions are operated with lead screw mechanism, acme threaded en8 made 6mm pitch for easy in movement.castors : high endurance, metal castors of 125mm dia having provisionision for diagonal locking with stem dia 22mm should be provisioned for better stability.powder coating :anti rust, thermosetting epoxy polyester powder coating should be used. all powder coating is in ral white.maximum weight :maximum safe working load is 135 kg.handle , including collapsible side railing : all the functions are operated with the help of single ergonomically handle, which are made of metal inserted pp co polymer , its lever is snap locked / magnet locked when not in use. all the handles are provided with operating guidance stickers.welding : to ensure quid quality welding co2 argon process is adhered to.powder coating : all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .].packing : goods are supplied in knocked down construction to reduce carbon emission. in house test report : proof loading test , cycle tests , impact test, horizontal and vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying hospital locker. the bedside locker has single drawer and cabinet with lock and with plastic molded handle. there is space between plastic top and the cabinet to keep the general items for the frequent use. cabinet is provisionided with lock to keep the valuable items for the safety. overall dimensions should be 490mmw x 410mm d x 941mm h.corner tube made of erw round tube with section 25.4 mm dia of 1.2 mm thickness.cabinet made of crca sheet of 0.8 mm thick provided with lock.( 470 mm x 410 mm x 382 mm).top made of abs of 2.2 mm thick / stainless steel ss 304 1.2 mm thick. top has recessed and contoured shape for better aesthetic and usability.plastic molded knob is provisionided with matt finish and dome shaped for better grip.plastic molded castors with 50 mm dia placed in diagonal locking arrangement.ral white, plastic parts in grey.5 kg udl on both the tops and 10 kg in the cabinet.all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial protection against at least 2 commonly found bacteria in hospital environment [gram positive and gram negative].goods are supplied in knocked down construction to reduce carbon emission. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of iv pole of saline stand. overall dimension should be 250 mm pcd with height adjustable from 743 mm to 1150 mm. it is fully ss made used on bed with telescopic rod for height adjustment. the bottom adapted is 12 mm dia, fixed tube is 15.9 mm dia , 1.6 mm thick erw tube. telescopic rod is 12 mm dia erw tube. there are 2 nos 6 mm dia hooks to hand saline bags. maximum load bearing capacity is 2kg per hook.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., single step stool is to be made of erw square tube.textured and rubber mat is to be provided, of 20mm x 20mm size. tube 1.2 mm thick and mat3.0 mm thick size:485(l) x 335 (w) x 210 (h) step stool is to be made of ms square tubes, is to be strong and firm. top is to be made of textured rubber offering firm grip for climbing frame:it should be made up of ms 19mmx19mm section of thickness 1.2 mm. stool top:stool top should be made up of ms of thickness1.2mm. rubber mat:steps should be provided with rubber mat which is made of natural rubber of thickness 3.2mm. maximum weight:maximum safe work load should be 135 kg. welding:to ensure qood quality welding co2 argon process should be adhered to. powder coating:all metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyester powder coating .packing:goods should be supplied in knocked down construction to reduce carbon emission. in house test report proof:loading test , cycle tests , impact test. certifications:, providing and supplying of examination couch with full storage of examination couch with full storage- overall dimension 1975 mm (l) x 560 mm ( w) x 805 mm (h). examination couch with three drawers with three cabinets, inbuilt step stool and bp tray holder.the base frame should made of 30 mm x 30 mmx 1.6 thick erw tube including 75 mm thick 40-density pu foam, 4-section, antibacterial rexine cover and fr grade. the cabinets should made of 1 mm thick crca sheet with recessed plastic handles / inbuilt formed handle and with lock and plastic door latch. the hindges of the cabinet should be made of sheet metal and pin arrangement. the internal dimension of the two sidecabinets should be 422 mm (w) x 455 mm (d) x 540 mm (h). the internal dimension of the centarl cabinet should be 422 mm (w) x 455 mm (d) x 358 mm (h). the storage cabinet unit should be mount tubular base frame. the head rest should be adjustable on gas spring which should be actuated with c shaped handle lever . the drawers should made of 1 mm thick crca sheet with recessed plastic handles and work on double extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (w) x 427 mm (d) x 92 mm (h). the mattress platform should be 65 mm thick which is made of 12 mm thick ply and pu foam and covered with leatherite cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. there should be ss304 made tissue roll holder present on the lower side of the back rest. there should be 1 mm thick crca made step stool with leveler with double extension ball slide for smooth operation. there should be 1 mm thick crca made bp aparatus holder which should be adjustable in height on a ss made height adjustable rod. total load bearing capacity should be 135 kg. the examination couch should be provided with six numbers levelers made of metal and plastic for adjustment on the uneven floor or nylon bush at bottom of examination couch. all the metal parts should be pre treated and powder coated with epoxy polyester powder coating.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of examination couch with full storage of examination couch with full storage- o overall dimension of l 2065 x w 850 x h 850 mm including 75 mm thick 40-density pu foam, 4-section, antibacterial rexine cover and fr grade , including long perennial cut (presumably perineal cut-out) , including bp apparatus tray provided near headrest , including foot step heavy-duty, easily sliding, built-in foot step. the backrest has ratchet mechanism for tilting the backrest. leg frames and intermediate frames should be made of erw tubes having section of 30 x 30 square tubes with thickness of 1.6mm. nylon 6 leg shoes is given to avoid wear and tear. ms sheet metal lying surface of thickness 1.2mm is used. top sheet metal panel base frame of 25 x 25 erw square tubes of thickness 1.6mm is used. ratchet is made of ms strip with section 40 x 4 to provision the backrest tilt. the table is provided with leathrite calf rest which is adjusted on ss304 made lithotomy rod. the rod and the calf rest is ht adjustable and swivel to achieve desired position. the table is provided with ss bowl stand to collect fluids and discharge during procedure. table is pre-treated and powder coated with epoxy powder coating. safe working load is 135kg. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of round stool should have of round stool. overall dimension should be diagonal leg dia 538 mm h470 min-655max. top plate made of ss 304 made sheet with spin section of thickness 1mm and non corrosive. it has a diameter of 305mm, seat base made of ms ring and rectangular tube. en8 screw having dia of 22 mm is used for height adjustment of the seat base. the round hub made of ms erw tube having dia of 38mm and thickness 2 mm. the hub is welded with the legs and it accommodate and cover the lead screw mechanism. the under-structure consist of 4 legs made up of ms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg give a round and clean look. all the legs is provided with 4 nos of nylon-6 bush. all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . safe working load is 135kg .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., supplying and fixing s.s 304 laboratory stool for hospital used psp-1037-ss stool 14 square stainless steel 18 gauge contoured seat stainless steel base with heel rest for added comfort tubular legs fitted with rubber shoes pretreated and power coated. as directed by engineer in charge etccomplete, providing and supplying glass door storwel . and should be mandatorily submitted along with bid. glass door storwel should be mandatorily submitted along with bid shall have an overall size of 916mm(w)x486mm(d)x1980mm(h) with welded construction. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d grade high yield strength as per is:513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt . it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing, supplying, installing, testing and commissioning (sitc) of electrically operated labour delivery bed (ldr bed) : overall dimensions - length: 2200–2350 mm × width: 950–1050 mm , four-section or three-section platform with integrated perineal cut-out for mattress platform, electrically adjustable from 550 mm to 900 mm height adjustment, 0° to 70° electrically operated backrest adjustment, safe working load minimum 200 kg, patient weight capacity minimum 250 kg, trendelenburg : minimum 12°, reverse trendelenburg : minimum 12°. bed frame constructed from 60 × 30 mm, 18g tube main frame & telescopic leg section .entire frame pre-treated with seven-tank anti-rust process and epoxy powder-coated finish.mattress platform made from radiolucent abs/hdpe moulded platform or perforated crca steel sheet.smooth edges with easy-to-clean construction.four-section high-density pu foam mattress.low-voltage dc motors, hand-held remote controller, control box inbuilt battery backup for operation during power failure, 230 v ac, 50 hz power supply, including side rails swing-down type on both sides, head & foot boards detachable polymer moulded, corner protection 4 corner buffers, electrical safety compliant with iec 60601-1.four heavy-duty twin castors with 125-150 mm dia.non-corrosive swivelling castors with centre locking, including 100 mm thick 40-density pu foam, 4-section, antibacterial rexine cover and fr grade , including saline stand telescopic ss saline stand, including lithotomy crutches one pair ss lithotomy crutches with pads, including handgripspvc handgrips with ss pipe, waste collection removable ss waste collection tray, quick release for back section., ward care bed delux (plain bed) (i.c. 7500) (1900mml x 91ommw x 61ommh .) providing and supplying a ward care bed frame work of specially designed crc rectangular , heavy tube, main tube size 60 × 30 × 1.6 mm , machine pressed crc sheet top with proper support. ss head and foot bows with laminated panels. four side saline arrangement location l.eg fitted with shoes. pretreated and powder coated. selection as per engineer-in-charge etc. completed. ( as per photo attached), supplying of dust bin of approved brand sintex or equivalent (as per photographs) of 100 liter capacity, providing and supplying stretcher on trolley should have strecher on trolley with overall dimension should be 2005 mm (l) x 666 mm (w) x 827 mm (h). it should be removable stretcher on trolley mointed on castors. including ss iv pole, 50 mm thick mattress and arrangement for oxygen cylinder, ss side rail. the trolley should be made of 31.75 mm and 25.5 mm dia 1.2 mm thick and 1.6 mm thick erw tube. the casters should be 200 mm dia diagonal lockable castors. stretcher understructure should be made of 25.4 mm dia 1.6 mm thick erw tube and the top should be made of 1.2 mm thick crca sheet. the stretcher should have provision to mount iv pole at four corners. the product should be pre treated and powder coated with epoxy polyster powder coating.the maximum load bearing capacity should be 135 kg.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying foldable wheel chair should have foldable wheel chair with over all dimension should be (l) 790 x (w) 600 x (h) 870mm foldable frame structure should be made of section 22x1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.the rear wheel should be made of 24 inch solid mag wheels with alloy in the rim .integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish. the front wheel should be of 8 inch hub made of pa polymer and outer with solid rubber. pu molded arm rest and base should be made of abs for better arm support .there should be leatherite strap for calf rest and leatherite cushion for seat. the foot rest should be adjustable alluminimum die cast foot rest with updown and swivel type mechanism and push handles should be made of moulded rubber grip to push the wheelchair. hand brakes should be provided to lock the wheelchair at desired location. the finsih of chair should be antirust chrome .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying three-fold partition screen should have three-fold partition screen- overall dimension: l 2637 x w 640 x h 1720 mm. frame should be made of erw tube with movable plastic hinges. the fix frame should be made of 25.4 mm dia 1.2 mm thich erw tube, the movable frame shouuld be made of 19.05 mm dia 1.2 mm thich erw tube and the leg frame should be made of 30 mm suqare tube with 1.6 mm .thick. the fixed portion should be 1075 mm width and the movable portion should be 778 mm width. 50 mm dia wheel castors should be provided. all ms parts should be pre treated and powder coated with thermosetting epoxy polyester. green color casement fabric must be provided for modesty.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of oxygen cylinder trolleyshould have ms oxygen cylinder trolley suitable for b type oxygen cylinder. the overall dimension should be 410 mm (l) x 375 mm (w) x 1112 mm (h). the main frame should made of 25.4 mm dia 1.6 mm thick erw tube with 10 mm dia ms made locking rod to keep the cylinder position during transit.the trolley should be provided with 100 mm dia 25 mm thick pu wheel for longer durability. ldpe made leg bush should be provided on the legs. max load bearing capacity should be 50 kg.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of semi fowler bed should have fowler bed. overall dimension should be: (l) 2138 x (w) 908 x (h) 559mm.functions : two function bed with adjustable backrest 70deg and upper leg rest 24deg.head board and foot board : 25.4 mm dia 1.2 mm thick ss202 made tube with 18 mm thick plt board.bed frame : bed frame is made of ms erw rectangular section tube of size 30mmx60mm of 1.6mm thick. . it has provisionision 4 iv pole holders . it is strengthened by rectangular tube section of size 60mmx30 mm having 1.6 mm thickness leg under structure : erw round tubes used with thickness of 1.2mm with section 31.75 mm dia.lying surface : lying surface made of ms erw of thickness of 1.0 mm thick or removable type 4 sections hdpe decks is also considered. this lying surface have 4 sections for bed profiling i.e. back adjustment, fixed pelvic section, upper and lower leg adjustment. lower leg rest section is provisionided with ratchet for leg rest adjustment. mattress platform is strengthened by tubular frame of size 25.4mm dia x 1.2mm thickness. it is strengthened by trapezoidal contour ( rounded corner ) 16 nos, embossed cut out. all metal components are pre treated with zinc phosphating and then powder coated with epoxy polyester powder coating. mechanism all functions are operated with lead screw mechanism, acme threaded en8 made 6mm pitch for easy in movementcastors : high endurance, metal castors of 125mm dia having provisionision for diagonal locking with stem dia 22mm should be provisionided for better stability powder coating :anti rust, thermosetting epoxy polyester powder coating should be used. all powder coating is in ral white.maximum weight :maximum safe working load is 135 kg.handle : all the functions are operated with the help of single ergonomically handle, which are made of metal inserted pp co polymer , its lever is snap locked when not in use. all the handles are provided with operating guidance stickers.welding : to ensure quid quality welding co2 argon process is adhered to. powder coating : all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .].packing : goods are supplied in knocked down construction to reduce carbon emission. in house test report : proof loading test , cycle tests , impact test, horizontal and vertical load tests for side rails, salt spray test, castor break test, pull test for head and foot board.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of instrument trolley should have iso 13485:2016 certificate from nabcb certified agency, ce certificate from european notified body with 4 digit registration code, iso 9001:2015, iso 14001:2015 and iso 45001:2018 certified and should be mandatorily submitted along with bid. of instrument trolley- ss 304 sheet should be provided at top for the placement of the instruments being used and also for easy in portability. ss 304 sheet should be provided at the top as well as bottom shelf for keeping the instrument being used. horizontal bars should be welded with legs so as to provide protection at sides with supporting legs giving a sturdy look.castors of 125mm dia. should be used for easy in movement. overall dimension: 775mm x 531mm x 915mm h. maximum safe working load must be 40kg.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of medicine trolley should have medicine trolley-overall dimension: - 902(l) x 532(b) x 915(h) mm. top shelf and bottom shelf should be made of ss304 sheet with 1mm thickness and 1.2mm. rest of the components like supporting legs, horizontal bar handle should be made of ss 304 pipe having dia 31.8, 12.7 mm respectively. the castors of high quality plastic injected molded and anti static having the dia of 125mm should be used.handles made of ss 304 pipe having section of 16mm and thickness of 1.2mm should be used.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying soil linen trolly should have i soiled linen trolley with overall dimension should be 625 mm dia and 955 mm height. the base frame should be made of 25 mm dia and 10 mm dia 1.6 mm thick erw tube.it should be fitted on 50 mm dia castor.the bag should made of casement fabric which should be wasable. overall load bearing capacity should be 10 kg.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying mayo trolly should have mayo trolley-overall sizes of base rectangle 504mm x 655mm x adjustable from 814mm to 1340 mm. height adjustment will be achieved with screw knob mechanism. bottom frame should be made of 1.2mm thick ss 304 tube of dimension 38 x 38mm square tube. top frame should be of 1.2mm thick and 304 ss grade rectangular shape of dimension 30 x 30mm. fixed tube of 3 mm thickness square in shape of 38 x 38mm telescopic tube should be used of 2 mm thickness rectangular in shape of 30 x 30mm. locking knob should be used ergonomically designed made of ss screw and nylon knob. tray supporting frame should be of thickness of 1mm. castors must be injection molded type of 50mm dia having high endurance, anti-static properties. safe working load must be 20kgs.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., supplying and installing biomedical waste trolley of 60 liter capacity of best plastic and approved brand and selected colour etc.(as per photograph) sintex of equivalent.(set of 3 bucket), providing and supplying crib should have crib for infant should be made of wire mesh crib on ms trolley.dimension overall size should be 892 mm (l) x 536 mm (w) x 1008 mm (h).the crib is of 16 mm and 5 mm dia 1.6 mm thick erw tube. the mesh is designed to accommodate the baby to provide ventilation and visibility.the base frame is of 25.4 mm and 10 mm dia 1.6 mm thick erw tube with 125 mm individual locking castor.the maximum load bearing capacity is 20 kg.all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .all powder coated parts in ral white.maximum patient load is 20 kg.packing goods are supplied in knocked down construction to reduce carbon emission. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying paediatric sheet bed should have overall dimensions should be (l) 1572 mm x 839 mm (w) x 1218 mm (h) till the bed surface head and foot board are made of 15.8 and 31.75 mm dia 1.2 mm and 1.6 mm thick erw tube respectively.erw round and rectangular tubes are used with thickness of 1.6 mm. sleek base frame with large clear space and ground clearance with long base structure provides greater stability.erw round tubes should be used with thickness of 1.6mm with section 32mmlying surface is made of crca sheet with thickness of 1 mm and is powder coated with anti microbial and anti rust coating. it consists of embossed holes to give more stability and load bearing capacity.the bed is provisionided with drop down type full side rails which should made of 15.9 dia and 19 mm dia and 1.6 mm thick erw tube.nylon6 made leg shoe is provided for avoiding wear and tear maximum safe working load is 135 kg.mattress- optional all metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating .1. all powder coated parts in ral white.2. other plastic parts in pantone cool grey 8c.goods are supplied in knocked down construction to reduce carbon emission. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying mattress should have mattress with overall dimension should be (l)615mm*(w)315mm*(h)50mm mattress for crib on bed and crib on trolley , mattress made of 40 density pu foam. the mattress have high end heavy helium cover which is water resistant, x ray permeable, fire retardant.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying mattress should have mattress with overall dimension should be (l)1415 mm*(w)785 mm* 75 mm(h).mattress is with 40 density 75 mm thick single section pu foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour and x-ray permeable. the zip and stitches for the mattress cover is concealed. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., supplying and placing instrument trolley without bowl and bucket with overall dimension: 775mm x 531mm x 915mm h. ss 304 sheet is provided at top for the placement of the instruments being used and also for easy in portability. ss 304 sheet is provided at the top as well as bottom shelf for keeping the instrument being used. horizontal bars is welded with legs so as to provide protection at sides with supporting legs giving a sturdy look. castors of 125mm dia. are to be used for easy in movement. maximum safe working load is approxx 40kg., providing and supplying of emergency crash cart should have advanced emergency cart constructed of crca powder coated ms sheet of thickness 1.2mm. overall dimension of l 1037 w x 672 h x 1435 mm.should have 5 drawers with drawer configuration: 2 small (390(l)x600(w)x71(h)mm) + 2 medium (390(l)x600(w)x149(h)mm) + 1 large (390(l)x600(w)x227(h)mm). all drawers should be lockable through central locking. should have anti-tilt mechanism. should have minimum five drawer with adjustable acrylic separators. should have cam lock type central locking mechanism for drawers provided with 100 security seal tagsshould have following accesories items.defibrillator shelf with monitor straps, sharps container – 2qty. oxygen cylinder holder, cardiac chest board made of compact laminate, push/pull writing surface, utility tray, document holder, catheter holder., a waste bin discarding syringes and gloves.wire wounder and mounting screws for spike guard.cart should have abs vacuum formed top tray of thickness 3mm, aluminum push handle of dia. 25mm built into the end panel for smooth stable movement. pullout writing surface top. cart should be light, sturdy, scratch and dent resistant. should have 4 tpe corner bumpers for collision protection, single wheel front locking castors should have 125mm diameter to facilitate quiet and easy movement. abs grade made top sheet with 3mm thickness should be used. ms cylinder case should be used with 2 velcro straps to hold the cylinder with a foam padded base. ss 304 grade pipe of section 16mm and thickness of 1.6mm should be used to to mount iv rod. high endurance anti-static, aluminum handle pipe should have section of 25mm with length of 365mm and should have thickness of 1mm giving a glossy finish. metal parts should be pre treated and powder coated with epoxy polyster pwder coat. safe working load must be 55kgs.optional accessory: spike guard/extension board.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., flip chart stand - size (600 mm x 1200 mm) providing and installing in position approved brand magnetic matt finish resin coated ceramic white board with g.i. sheet backing filled with honey combing material and arrangement for flip chart and arrangement for fixing on wall., white board (2500mm x 1000mm)(display board for writing / projections) providing and installing magnetic matt finish resin coated ceramic white board of approved make with g.i. sheet backing filled with honey combing material and proper arrangement for hanging an wall with full length tray at bottom for duster and maker person.hooks to be provided on top for hanging., providing and supplying of storwel with greenguard, indoor advantage gold, greenpro etc. and should be mandatorily submitted along with bid.storwel plain shall have an overall size of 916mm(w)x486mm(d)x1981mm(h) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d grade high yield strength as per is:513. the storwel plain should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying green certified with valid certifications like greenguard, indoor advantage gold etc. and should be mandatorily submitted along with bid.product size - 375(w) x 470(d) x 1950*(h) *height including leveler * height of leveler is 50mm and adjustment possible is 15mm.construction and material - aesthetically appealing completely knock down construction.the add-on units are stack widthwise to form a row of lockers. (note- single main unit should not be offered. minimum 1main + 1addon to be offered, maximum 1main + 4addon to be offered) legs fitted with screw type leveler. made from combination of top panel(0.5mm crca), side panel(0.5mm crca), bottom panel(0.5mm crca), back panel(0.5mm crca), top bottom stiffener(1.2mm crca) and end cover(0.5mm crca). ** - crca d grade as per is-513 - crca d grade as per is-513 doors (without envelope slot) - made from 0.6mm thick crca (d grade, is-513) soft closing hinge. door size - for 6 door locker - 373(w) x 18(t) x 314(h)cam lock - oval knob that functions as a handle - click action mechanism - key removal in locked and unlocked position - zinc alloy die cast housing shelving - 5 shelves for 6 door locker with and without envelope slot finish - epoxy polyester powder coated to the thickness of 50 microns (+/-10 micron).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., supplying of dust bin of approved brand sintex or equivalent (as per photographs) of 240 liter capacity, providing and supplying over bed table should have iso 13485:2016 certificate from nabcb certified agency, ce certificate from european notified body with 4 digit registration code, iso 9001:2015, iso 14001:2015 and iso 45001:2018 certified. and should be mandatorily submitted along with bid. of over bed table with height adjustale feature.overall dimension should be (l)896 mm x ( w)395 mm x (h) adjustable from 800 mm to 1083 mm .table top height can be adjusted with the help of operating lever which activates the gas spring. base frame is made of erw round tube with 50.8 mm dia and 1.6 mm thickness.housing is made of aluminium extruded inner and outer tubes.handle for gas spring made of ms sheet metal of section 74 mm x 115 mm with 3 mm thick handle with crca material making strong lever and have provision of wider area for grip.gas spring of length 835 mm and stroke of 293 mm. smooth functioning gas spring with adjustable height and consistent motion during operation.effort level to push downward equal 14.5(-2kg)at room temp 29°c. plain top made of membrane pressed mdf with section 395 mm x 896 mm of 18 mm thickness. membrane pressed mdf board of frosty white shade on top surface and with edge lipping.top: mdf top with membrane press , should give anti scratch property with good surface finish. castors: high endurance anti-static,plastic injection molded castors are provided of ø50mm.all metal parts should be pre treated and powder coated with epoxy polyster..max safe working load: 20 kg udl. goods are supplied in knocked down construction to reduce carbon emission. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., back rack of size 2400 x 450 x 690 mm.back rack of length as per design, and 450 depth and 750 height. the storage unit should be of knock-down type. the back rack should have provision for storage, and be opened by swing curvica doors. the side drops should be from 19 mm thick ply with wooden lipping. the top should be from curvica 25 mm thick mdf. which is post formed. in absence of post formed edges, wooden edging may be accepted at the discretion of consultant. back rack should have 125mm high drawers and rest as shutters shown in the drawing and may varied in design at the time of execution. the back rack should be on lockable pvc castors of approximately 70 mm. doors should be lockable with 2 keys for each lock. side table should be provided s.s. legs, s.s. handles of 75mm as shown in the drawing and approved make by engineer of architect. the contractor should make one moke up unit for approval of the architect and concern authority and approve the back rack as per photo attached., side table of size 750 x 450 x 750 mm.the storage unit should be of knock-down type. the side table should have provision for storage, and be opened by swing doors. the side drops should be from 19 mm thick ply with 5 – 6 /19mm wooden lipping. the top should be from 37.5 mm thick mdf or ply. which is postformed. in absence of postformed edges, wooden edging may be accepted at the discretion of consultant.side table should have 125mm high drawers and rest as shutters shown in the drawing and may varie in design aat the time of execution.the side table should be on lockable pvc castors o approximately 70 mm. doors should be lockable with 2 keys for each lock. 750 x 450 x 750. as per detailed drg. as per photoattached., providing and supplying single bed with overall size:width - 2050.0 mm depth - 973.0 mm height - 720.0 mm.material:headboard panels are made of 18 mm thick prelaminated particle board. all the exposed edges are edge banded with 2 mm thick pvc edge banding.bed leg frame structure consist of metal frames made of m.s. 50 x 25 mm box section in 1.2 thickness internal pipes made of 19 x 19 mm box section in 0.9 mm thickness. headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. mattress holding bkt is made of 0.6 mm crca sheet mattress frame sheetmetal top is made of 1 mm crca sheet.hardware:the high quality hardware used. construction:knock down construction.packets: 1 packet. finish:18 mm thick prelaminated particle board is in 4501, make — godrej (shirval).bed leg frame structure are powder coated in shade : matt taupe white. ref no. 9001904to thickness of 50 microns (+-10). mattress frame structure are powder coated in shade : epp fr tex. milky white 20k, ref no. 9003456 to thickness of 50 microns (+-10). rest all metals are powder coated in shade : s/g charbrown. ref no. 9000605 to thickness of 50 microns (+-10).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying side table with overall size :depth — 461.0 mm width — 460.0 mm height — 510.0 mm material:body panels of bed side table are made of 18 mm thick prelaminated particle board 1s:12823 class e1 (as per en13986) .all the exposed edges are edge banded with 0.8 mm thick pvc edge banding glued with hot melt eva glue.drawer front are made of 18 mm thick prelaminated particle board 1s:12823 class e1 (as per en13986). hardware:the high quality hardware used like roller slides, hinges , minifix, dowels is of make hettich.construction:knock down construction.packets :1 packet.finish :.18 mm thick prelaminatedparticle board 1s:12823 class e1 (as per en13986) is in imperial oak shade.lipping shade is 299p make rehau.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying storage with product size - 2 doors (lh and rh) for 1200w for 1200w storage-each door width 598w construction and material - made from 0.6mm thick crca (d grade, is-513) soft closing hinge handle - asthetically appealing handle made of aluminum cam lock - -3 way locking provision.- click action mechanism. - key removable in locked and unlocked positions. - zinc alloy die cast housing.shelving - it is a 12 bend panel made of 0.7mm thick crca (d grade, is-513) each shelf has max load capacity of - 80kg udl for 1200w unit 5 nos. of fixed shelves for 2325(h) a4 size box file (85wx340hx285d) can be stored vertically on all loading levels (refer sheet 4 of 17) number of files that can be stored in one shelf is as follows:1200 w equal 13 no of filesfinish - epoxy polyester powder coated to the thickness of 50 microns (+/-10 micron).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying study table with overall size:width - 900 mm depth - 600 mm height - 750 mmmaterial:top panel is made of 18 mm thick prelaminated particle board all the exposed edges are edge banded with 2 mm thick pvc edge banding.structure consist of metal frames made of m.s. 25 mm square pipes in 0.9 mm thickness. drawer assembly consists of drawer front made of 0.6mm crca sheet, drawer tray of 0.8mm crca sheet.hardware :the high quality hardware used .construction:knock down construction.packets:3 packets.finish:18 mm thick prelaminated particle board is in 4501,make — godrej (shirval).side frame structure and back frame structure are powder coated in shade : matt taupe white. ref no. 9001904 to thickness of 50 microns (+-10).rest all metals are powder coated in shade : s/gcharbrown. ref no. 9000605 to thickness of 50 microns (+-10).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cafe table ,canteen table of the following specifications. 4 seater pu coated size shall be 1135 width mm x 1175 depth mm x 750 height mm . top shall be 25 mm thick base material shall be 25 mm mdf board . on top pu painting of minimum 2h hardness with 75 percent glass as per color chart .combination color graphics on the centre . brown laminate on bottom specially profiled edges for comfort . the understructure shall be having bend pipe structure of ms powder coated . pipe dia 38 mm , 2 mm thick and it shall be fitted with top by ss machine screws . legs shall be of ms powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . glide shall be of plastic fixed at the understructure to prevent the damage of table top during stacking .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cafe chair.the seat and back should be made up of injection moulded indoor grade polypropylene compound seat size : 52.5 cm. (w) x 53.2 cm. (d) back size : 51.6 cm. (w) x 40.5 cm. (h).the powder coated ( dft 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the shoes should be made of indoor grade polypropylene compound and snap fitted with tubular frame. overall dimensions of chair-seat height - 45.0 cm.height - 84.5cm. width-52.5 cm and depth-55.8 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying storwel with storwel plain with gordian lock shall have an overall size of 916mm(w)x486mm(d)x1981mm(h) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d grade high yield strength as per is:513. the storwel plain should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying minor storwel .storwel minor plain shall have an overall size of 765mm(w)x440mm(d)x1270mm(h) with welded construction. it should have the shelf thickness of 0.7mm, back thickness of 0.8mm and all other components shall be 0.9mm thick. these components are made of crca ‘dgrade high yield strength as per is:513. the storwel minor should have a three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting (3 nos.) which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying glass door storwel . glass door storwel shall have an overall size of 916mm(w)x486mm(d)x1980mm(h) with welded construction. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d grade high yield strength as per is:513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt . it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing office modular system * providing and fixing 52.4mm thick 1200 mm high panels along spine in wish system. with combination of metal raceway at bottom, two intermediate fabric blocks, top tile - fabric tackable, white board. providing powder coated legs. * providing 22.8 mm thick panel with bottom metal screen, intermediate fabric screens and top screen in fabric magnetic finish. pentagonal worksurface - 1500 w1 x 1500 w2 x 600 d - providing 25 mm thick prelaminated pentagonal worktop with pvc lipping, metal kbpt and cpu trolley, * providing and placing 52.4mm thick 1200 mm high panels along spine in wish system. with combination of metal raceway at bottom, two intermediate fabric blocks, top tile - fabric tackable, white board. providing powder coated legs. * providing 22.8 mm thick panel with bottom metal screen, intermediate fabric screens and top screen in fabric magnetic finish. workstation of size 1200 x 600., * providing and placing 52.4mm thick 1200 mm high panels along spine in wish system. with combination of metal raceway at bottom, two intermediate fabric blocks, top tile - fabric tackable, white board. providing powder coated legs. * providing 22.8 mm thick panel with bottom metal screen, intermediate fabric screens and top screen in fabric magnetic finish. workstation of size 1500 x 600., providing and supplying pedestal 390x435x646h.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge. pedestal – 3 drawer (2box + 1 file) metal finish top supporting pedestal with central locking arrangement of size 390x435x646h in mm., providing and supplying main table with eru ..supplying and placing in position main table with eru of the following specifications. its size shall be 1650 width x 700 depth x 743 height (main desk) 1000 width x 450depth x 743 height (eru).top shall be of 18 mm thickness made of plt board with 2 mm edge banding. wenge and savannah maple plt board shall be used. the understructure shall be in pre-laminated panels made with plt boards . 2- drawerand 3 - drawer storage units with different combinations to support tops made with 18 mm plt boards of different colours.modesty and back panels made with 18 mm plt boards. the pedestals / storages shall be fitted with necessary locks. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing compactors storage units shall be two bay single static (ss), single last (sl) and twin mobile storage system (2 body back to back) with five loading levels formed by 4 nos. adjustable shelves. the unit should have load bearing capacity is 40 kg uniformly distributed per shelf (multiply by no of bays) for different type of configuration. the main body construction should be made out of 0.8 mm thick crca steel confirming to is 513 gr d. the height of the storage system shall be approx. 2080 mm from the ground including rail. each body block (ss/sl/ttm) building should consist of 1 main unit and then add-on units (1 no of bays 2) b) storage units shall be fixed or movable and shall be bolted to the undercarriage which shall roll on to the channels which are firmly embedded to the ground. c) the configuration of storage system shall consist of single or double fixed or movable and twin mobile blocks as per the drawing. d) a shelf shall be made of 0.80 mm thick crca steel conforming to is 513 gr d. shelves are mounted on support brackets and shelf level can be adjusted at approx. 25.4 pitches. each shelf should be able to bear 80 kg udl. e) the finish of the bodies including shelves should be given anti corrosive surface treatment and should be powder coated with epoxy polyester powder. 8-step treatment consisting of hot water rinse, knock of degrease, degrease, cold water rinse, phosphate, cold water rinse, and passivising and dry off over treatment shall be done. final finish should consist of epoxy polyester powder coating of approved color and shade with a dry film thickness of minimum 40 microns. f) an undercarriage should be a welded frame made of hr sheet 3.15 mm thick conforming to is 10748 and suitably fabricated to take the loads based on various configurations. the undercarriage should be well finished with epoxy polyester powder coat of approved color and shade with a dry films thickness of minimum 40 microns. g) a centralized locking system is to be provided on the side/back of the last units so that it gets locked on all channels when all the units are brought together. end stoppers are to be provided at the end of channels to prevent derailment. h) all fasteners shall be galvanized/zinc plated. i) guide channels should be of 2 mm thick hr sheet and 25 mm square bright bars properly installed. k) provision for label holders on each unit is to be made. j) hinge door should be made of 0.8 thick crca steel confirming to is : 513 grade. it should have recessed die cast handle cum lock giving 3 way locking through a lever and shooting bolts. (a) single static 2 bay push pull type 1830 w x 381 d x 1980+100 h in mm, (b) twin mobile 2 bay push pull type 1830 w x 762 d x 1980+100 h in mm, (c)single last 2 bay push pull type 1830 w x 381 d x 1980+100 h in mm, (d)channel of 3 ft, (e)channel of 6 ft, (f) channel of 9 ft, providing and fixing compactors storage units shall be two bay single static (ss), single last (sl) and twin mobile storage system (2 body back to back) with five loading levels formed by 4 nos. adjustable shelves. the unit should have load bearing capacity is 40 kg uniformly distributed per shelf (multiply by no of bays) for different type of configuration. the main body construction should be made out of 0.8 mm thick crca steel confirming to is 513 gr d. the height of the storage system shall be approx. 2080 mm from the ground including rail. each body block (ss/sl/ttm) building should consist of 1 main unit and then add-on units (1 no of bays 2) b) storage units shall be fixed or movable and shall be bolted to the undercarriage which shall roll on to the channels which are firmly embedded to the ground. c) the configuration of storage system shall consist of single or double fixed or movable and twin mobile blocks as per the drawing. d) a shelf shall be made of 0.80 mm thick crca steel conforming to is 513 gr d. shelves are mounted on support brackets and shelf level can be adjusted at approx. 25.4 pitches. each shelf should be able to bear 80 kg udl. e) the finish of the bodies including shelves should be given anti corrosive surface treatment and should be powder coated with epoxy polyester powder. 8-step treatment consisting of hot water rinse, knock of degrease, degrease, cold water rinse, phosphate, cold water rinse, and passivising and dry off over treatment shall be done. final finish should consist of epoxy polyester powder coating of approved color and shade with a dry film thickness of minimum 40 microns. f) an undercarriage should be a welded frame made of hr sheet 3.15 mm thick conforming to is 10748 and suitably fabricated to take the loads based on, (b) twin mobile 3 bay drive type 2745 w x 762 d x 1980+100 h in mm, (c)single last 3 bay drive type 2745 w x 381 d x 1980+100 h in mm, (d)channel of 3 ft, (e) channel of 6 ft, (f) channel of 9 ft, providing and placing slotted angle rack : 1300 w x 500 d x 1895 h mm. to be provided with 5 shelves. blotless rack made of crca steel., providing and supplying main table with eru and pedestal of the following specifications. 2350x2350x750 primary work surface made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top soft closing access flap with in-build power box are provided on work surface for wire management.secondary work surface made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top.modesty panel made of 25mm thick mdf one side pre-laminate board confirming to is-14587:1998 with 0.4mm pvc membrane pressed on to top.under structure made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.integrated pedestal made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.drawer fronts made of 25mm thick mdf one side pre-laminate board confirming tois-14587:1998 with 0.4mm pvc membrane pressed on to top pedestal construction is box-box-file type which uses powder coated 400 mm long metal panel drawer slides. drawer extension is 325 mm.drawers have a soft closing and anti slam mechanism.handles are provided for ease of opening.pedestals are provided with lock for security.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying leatherette chair with high back chair. seat/back assembly : the cushioned seat should be made of injection molded plastic outer and inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25 percent compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather.seat size : 47.6 cm. (w) x 49.2 cm. (d)back size : 47.5 cm. (w) x 77 cm. (d)armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features:• 360° revolving type.• front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.• tilt tension adjustment can be operated in seating position.• 5-position tilt limiter giving option of variable tilt angle to the chair.• seat/back tilting ratio of 1: 2• the mechanism housing should be made up of hpdc aluminium black powder coated.seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm.adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.)twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. overall dimensions of chair-seat height -44.5 to 54.5 cm.height -114.0-131.5 cm.width and depth of chair as measured from base - width-76.1 cm and depth-76.1 cmthe rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying leatherette chair office chair.seat/back assembly: the seat and back should be made from seasoned wood and plywood. the same should be upholstered with black synthetic leather and polyurethane foam.back size: 46.0cm. (w) x 27.0cm. (h) seat size: 46.0cm. (w) x 40.0cm. (d).armrest tube: the armrest tube should be made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and powder coated (dft 40-60 microns).understructure assembly: the understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. m.s. e.r.w. tube and powder coated (dft 40-60 microns).overall dimensions of chair-seat height - 48.0 cm.height - 87.5cm.width and depth of chair as measured from base - width-58.0 cm and depth-56.5 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying main table with eru. main table with eru of the following specifications. its size shall be 1650 width x 700 depth x 743 height (main desk) 1000 width x 450depth x 743 height (eru).top shall be of 18 mm thickness made of plt board with 2 mm edge banding. wenge and savannah maple plt board shall be used. the understructure shall be in pre-laminated panels made with plt boards . 2- drawerand 3 - drawer storage units with different combinations to support tops made with 18 mm plt boards of different colours.modesty and back panels made with 18 mm plt boards. the pedestals / storages shall be fitted with necessary locks. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cushion back high back chair. seat/back assembly:-the seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measured. upholstered with fabric and moulded polyurethane foam together with moulded seat and back covers. the back foam shall be designed with contoured lumbar support for extra comfort. back size -50.0 cm (w) x 72.0 cm (h) . seat size-50.0 cm (w) x 46.5cm. (d). high resilience(hr) polyurethane foam: the hr polyurethane foam should be moulded with density 45±2kg/m3-and hardness load 16 ±2 kgf for 25 percent compressionseat/back covers:the seat cover shall be injection moulded in black co-polymer polypropylene and back cover should be vacuum formed from abs sheets.armrests: the one-piece armrests shall be made of black integral skin polyurethane with 50-70 shore a hardness and reinforced with m.s. insert. the armrests shall be scratch and weather resistant tant. the armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick hr steel. center tilt mechanism:the center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, upright position locking, tilt tension adjustment.pneumatic height adjustment:the pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. telescopic bellow assembly: the bellow shall be 3 piece telescopic type and injection moulded in black polypropylene. pedestal assembly: the pedestal shall be injection moulded in black 33 percent glass-filled nylon-66 and fitted with 5 nos. twin wheel castors. thepedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors) twin wheel castors;the twin wheel castors shall be injection moulded in black nylon.overall dimensions of chair-seat height - min 44.2 to max 54.2cm.height - min103.3 to max 115.3cm.width and depth of chair as measured from pedestal - width-76.3 cm and depth-76.3 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cushion two seater sofa. side frame assembly: the side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. it should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated (dft 40-60microns). the ends should be fitted with abs moulded end caps.tie member: it should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. the tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( dft 40-60 microns ). the seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk 5.5 ±0.1cm long ms. std. angles welded to mount the seat and back.seatrest assembly:the seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 25 ± 2 kgf for 25 percent compression of the foam. the complete moulded seat rest assembly should be covered with a replaceable fabric upholstery coverseat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t)backrest assembly:the backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 14 ± 2 kgf for 25 percent compression of the foam. the complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover.back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t).adj. glides: the adj. glide should be injection moulded in black nylon and fitted to the front end of side frame assembly along with abs moulded adj. glide base to take cshould be or unleveled floor surface.overall dimensions of chair-seat height - 43.5 cm.height - 78.5cm.width and depth of chair as - width-113.0cm and depth-70.0 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cushion three seater sofa. side frame assembly: the side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. it should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated (dft 40-60microns). the ends should be fitted with abs moulded end caps.tie member: it should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. the tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( dft 40-60 microns ). the seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk 5.5 ±0.1cm long ms. std. angles welded to mount the seat and back.seatrest assembly:the seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 25 ± 2 kgf for 25 percent compression of the foam. the complete moulded seat rest assembly should be covered with a replaceable fabric upholstery coverseat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t)backrest assembly:the backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 14 ± 2 kgf for 25 percent compression of the foam. the complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover.back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t).adj. glides: the adj. glide should be injection moulded in black nylon and fitted to the front end of side frame assembly along with abs moulded adj. glide base to take cshould be or unleveled floor surface.overall dimensions of chair-seat height - 43.5 cm.height - 78.5cm.width and depth of chair as - width-164.0cm and depth-70.0 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cusion one seater sofa. side frame assembly: the side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. it should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. tube and powder coated ( dft 40-60 microns ). the ends should be fitted with abs moulded end caps.tie member: it should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. the tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( dft 40-60 microns ). the seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk 5.5 ±0.1cm long ms. std. angles welded to mount the seat and back.seatrest assembly:the seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 25 ± 2 kgf for 25 percent compression of the foam. the complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover seat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t).backrest assembly:the backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with high resilience (hr) polyurethane foam having density equal 45 +1- 2 kg/m3 with hardness load 14 ± 2 kgf for 25 percent compression of the foam. the complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover.back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t).adj. glides: the adj. glide should be injection moulded in black nylon and fitted to the front end of side frame assembly along with abs moulded adj. glide base to take cshould be or unleveled floor surface.overall dimensions of chair-seat height -43.5 cm.height - 78.5cm.width and depth of chair as - width-60.5cm and depth-70.0 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying public seating. seat shell : the seat is made from high density self-skin polyurethane foam reinforced with 1.2 mm m.s. perforated sheet insert. the polyurethane foam having density of min. 350 kg/m3 with a shore a hardness of 60±10.seat size : 52.0 cm (w) x 50.5 cm (d)back shell : the back is made from high density self-skin polyurethane foam reinforced with 1.2 mm m.s. perforated sheet insert.the polyurethane foam having density of min. 350 kg/m3 with a shore a hardness of 60±10.back size : 52.0 cm (w) x 53.5 cm (h)cross beam : cross beam made up of diamond shaped double wall extrusion of aluminum 6063-t6 alloy with coated of 50 micron epoxy polyester coating and fitted with polypropylene copolymer engineering plastic end caps.cross beam size : 11.3 cm (w) x 9.4 cm (h) x 0.4 cm (thickness).leg : legs are made up of high pressure aluminum adc12 die cast coated with 50 micron epoxy polyester coating, leg are fitted with soft grip pvc level adjusting shoes.armrest : armrest are made up of high pressure aluminum adc12 die cast coated with 50 micron epoxy polyester coating.seat support bracket assembly : seat support bracket assembly made up of argon shield welding of hot rolled steel (is: 2062) 0.3cm thickness. this welded structure is coated with 50 micron epoxy polyester coating.cl ing bracket : cl ing bracket are made up of hot rolled steel (is: 2062) 0.3cm thickness coated with 50 micron epoxy polyester coating.overall dimensions of chair-seat height - 42.5 cm.height - 87.0 cm.width-165.5cm and depth-66.5 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and installation and placing 2 seater sofa having size: 1200 mm(length) x 882 mm(heigth) x 390 mm(floor to seat heigth) x 450 mm ( depth of seat) x 525 mm ( width of seat) x 26 mm ( thickness of seat) having main frame hexagonal mil steel and armrest and legs frame support shall be of high pressure aluminium die cast and finishshed with poder coating of minimum 60 micron and having cdg bifma 5.1 qc certified as per technical specification and directed by engineer in charge., providing and placing the side table glass should be 60 cm(w) x 60(d) x 35.1cm(h), 12+/-0.33 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for fixing with understructure.the side table understructure is a welded assembly made in ss202 grade having dia 12+/-0.04 as per is:1762, providing and supplying green certified center table should be mandatorily submitted along with bid. of coffee table. center table glass: it is 10 ±0.3 mm thick black tinted toughened glass uv glued with bushes made in ss 202 grade for focing with understructure. center table understructure: it is a welded assembly made in ss202 gradedia. 12±0.04 as per is:1762.width of table equal 112.0 cm, depth equal60.0 cm, height equal34.9 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing cupboard :- providing and fixing with appropriate arrangements, steel framing with steel shutters of 18 gauge having out to out dimensions of 3.1m x 1.95m having three double door shutter of size 0.9mx1.95m each in existing internal partitions of masonry wall, the shelves all made of 18 gauge steel. the item of work encompasses fabrication of framework out of folded steel profiles with over all depth of 10cms and 4cms thickness and three full height shutters of 0.9m width , made out by bending the steel on vertical edges to form 25 mm thickness at edge of the shutters. the top and bottom edges of the shutters shall be formed by fixing steel angle profiles made out of 18 gauge steel with necessary holes to house the tower bolts of locking system on top and bottom edges. the shutters thus formed shall be fixed to the framing with pivot mechanism. the shutters shall be strengthened by providing 18 gauge bent steel profile vertically in the centre to act as beam and full height double door shutters shall carry three shelf in each shutter of 0.6m depth as per instruction of engineer in charge. the full height shutters shall be lockable by 10 mm diameter ms tower bolt rod anchored in top and bottom edges of the frame by the lock lever movement. all shutters to be fixed with approved design aluminium handles of 135mm size and all the steel surfaces shall be spray painted in approved shade and finished to the satisfaction of and as directed by the engineer-in-charge. unit of measurement:the work shall be measured from out to out periphery of elevation vertically and horizontally and in a unit of sq.mtrs. the rate quoted shall be including shelves, fastener, hardware including required all accessories and arrangement, providing and placing white board (2500mm x 1000mm) (display board for writing / projections) providing and installing magnetic matt finish resin coated ceramic white board of approved make with g. i. sheet backing filled with honey combing material and proper arrangement for hanging an wall with full length tray at bottom for duster and marker person. hooks to be provided on top for hanging charts, maps etc. (please refer annexure for approvedmake / manufacturer), providing and placing notice board having 9mm soft board as a core materail 1mm laminate sheet as back materail and surface of 1.mm felt cloths, having profile of heavy alumnuim fluted anodized profile 10 to 12 micron of 18 to 25 thick board c channel and corner is made uo of molded virgin abs grey colour hanging vertical and horizontal hanginh facilty as per selected colour and size including all necesaary fixture , faster, fitting, labour material machinary etc complete as selected and directed by engineer insharge. approved make: scholar/pearl/alkonsign/elora -notice board size 900mm x 1200mm overall size:1200x900, supplying and placing slotted shoe rack : 900 w x 300 d x750 h mm. to be provided with 4 shelves with ss 304 grade supporting legs, horizontal bar is made of ss 304 pipe having dia 31.8, 25 mm respectively., providing, supplying, fabricating and fixing hospital cubicle track system comprising high-grade aluminium alloy box-section track of approx. 20 × 25 × 1.7 mm, white epoxy powder-coated 50–60 micron, bendable up to 250–300 mm radius at 90°, with spans up to 3 m between supports, complete with aluminium wall brackets, bridge cl s, adjustable aluminium roof suspension, ss curtain-removal/end-retainer points and pvc wheel-type runners with ss 304 hooks. providing and fixing hospital-grade inherently flame-retardant, permanently antimicrobial and stain-resistant curtain fabric with 18–24 flame-resistant nylon mesh, complying with applicable nfpa 701, bs 5867 and en 13773 requirements, complete with all accessories, hardware, supports, fixing, installation and testing as directed by engineer-in-charge., providing and placing of manual roller blinds having aluminum roller tube along with fabric pasted on it with glue having control unit for manual operations and bottom bar aluminum powder coated for weight purpose, including fabric, fitting and accessories of approved make and colour etc. complete.vista/hunterdouglas or equivalent. fabric to be approved by architect, providing and placing of dust bin of approved brand sintex or equivalent (as per photographs)of 5 liter capacity, providing and placing of chart holder for holding the chart which can be hanged on the side of beds. material:- crca 0.6mm thickness powder coating:all metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyester powder coating, providing and supplying cafe chair with desklet.the seat and back should be made up of injection moulded indoor grade polypropylene compound seat size : 52.5 cm. (w) x 53.2 cm. (d) back size : 51.6 cm. (w) x 40.5 cm. (h).the powder coated ( dft 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm mserw tube. the shoes should be made of indoor grade polypropylene compound and snap fitted with tubular frame. the armrest should be made of indoor grade polypropylene compound and assembled over the tubular frame. the l shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. desklet should have back and front adjustment of 4.4+-0.5cm. the paper tray should be made of 0.4mm thick ms rod which is spot welded to form a mesh like structure.overall dimensions of chair-seat height - 45.0 cm. height - 84.5cm.width-57.5 cm and depth-67.8 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing ebco make key board tray, size : 705 x 284 providing and fixing key board pull out tray made out of high quality foil pressed on pre-laminated mdf with side mouse pad tray having height adjustment on mounting brackets with smooth sliding operation and with removable drawer with latches having load carrying capacity of 12.00 kg incl. all necessary fixtures, fasteneres , labour and material as diretced by engineer-in- charge.ebco make key board tray (705 x 284 mm size), providing and placing ebco make cpu trolley providing and fixing telescopic cpu stand made from m.s slim stores cpu under the table with soft anti vibration pads and adjustment width of 45mm to 100 mm having height adjustment from 310mm to 530 mm and safe load carrying capacity of 20.00 kg finished with powder coating of 50 micron thickness incl. all necessary fixtures , fasteneres , labour and material as diretced by engineer-in- charge.ebco make cpu trolley, providing and placing ebco make foot rest, size : 450 x 350 providing and arranging foot rest made up of high impact polystyrene having over all size 450 mm x 350 mm with tilts of 0o to 20o for angular movement and non slippary platform surface including all materials and labour etc. complete as per drawing / photographs and instruction of engineer-in charge.ebco make footrest: size 450mm x 350mm ebco make footrest: size 450mm x 350mm, providing and placing photo with frame, size : 600 x 400 providing and fixing photo frame made of teakwood border patti of size 25x25 with melamine polish finish with 3 mm glass and inside the picture on photo paper with high resolution picture quality and sticked on mdf as selected by engineer-in-charge including all necessary fixture, fasteners,labour , material etc comp., providing and placing ajanta make : wall clock provinding and fixing ajanta make wall clock of the desired shape and design as selected by engineer in charge ajanta wall clock, providing and placing acrylic worktop providing and arranging arylic work top with 10mm clear imported acrylic sheet with two brass rods with height adjustable of overall size 580 mm x 400 mm etc complete as diretced by engineer incharge.approved make: scholar/pearl/alkonsign/elora acrylic worktop, providing and placing partitions are generally structured by aluminum extruded sections.all panels are in standard size and ready to assemble condition.all exterior metal surfaces are powder coated finish .12 mm thk. pre laminated or laminated panel on both the side of the partition. it has provision for all utility management and to mount worktops, etc., all joineries are free from nailing, screwing and adhesives. .all components are removable without any damage and designed to reconstruct, reorient or reconfiguration layout very easily.entire systems are free from maintenance like refinishing anti pest treatments or refitting, lifetime.it has inherent sound and thermal insulation properties. all panels are twin layered and very proper sealing in joint are provided to ensure these properties. system is designed in such a manner that resizing of structure and related mountings can be carried out at site easily, if required. it is eco-friendly in true sense. partition skeleton main vertical section : aluminum extruded section having overall size of 73 mm x 29 mm having wall thk. 1.50 mm with provision to connect to outer vertical closing section at all side. main horizontal section : aluminum extruded section having overall size 73 mm x 29 mm having wall thk. 1.50 mm with provision to connect with each other at side to supporting panels of 12 mm thk. on the both sides of partition. electric trench box section : aluminum extruded section having over all size 60 mm x 80 mm having wall thk. 1.40 mm with snap fitting arrangment. connecting pole section : aluminum extruded section having overall size 99.60 x 99.60 box section having wall thk. 1.40 mm and provision to connect with all type of connections. ( i.e. l , t and plus connectivity ). verticle and horizontal covring seal section : aluminum extruded section having over all size 32.20 x 8.40 mm having wall thk. 1.20 and provision to cover all open sides with snap fitting. double glass section : aluminum extruded section having over all size 56.0 mm x 9.70 mm having wall thk. 1.20 mm and provision to hold 5 mm thk. glass with cushioned rubber for every side of glass on both the sides of the panel. solid filler panels: solid panel made out of 12.00 mm thk. laminated / pre laminated board of particle or mdf or ply on both side of the partition. glass filler panels : having 5 mm thk. clear toughened glass on both sides of the partition., providing and placing kitchen platform providing and fixing kitchen storage made of 18mm thick bwr plywood with 1mm thick laminate finish.drawers and shutter made of 18mm thick bwr plywood with 1m thick laminate finish.drawer run on telescopiec chennal and shutter hanging on auto hinges with all necessary hardware included.kitchen under storage, providing and placing acrylic name board : 12 x 5 providing and fixing sign board made of acrylic sheet and fixing on door wall in first or second alphabet as instructed in radium material .including all materials and labour etc.complete as per detail drawing and instruction of engineer-in charge., providing and placing alkosign make : key cabinet 40 keys providing and fixing steel back key cabinet for 40 keys having overall size of 520mm (w) x 50mm (d) of 500mm (h) of 13mm anodised aluminum single and double frames. back steel sheet is grey colour powder coated with 40 nos punched holes for key chain with steel wire rings numbered 1 to 40 having corners of abs in grey colour. cabinet should with 1 no of lock with 2 nos of keys and top cover in 3 mm thick acrylic sheet including all neceassary fixture, faster, fittings, labours material machniary etc complete as selected and directed by engineer incharge approved make: scholar/pearl/alkonsign/elora key cabinet: size : 520mm x 500 mm, providing and supplying dispaly racke with overall dimensions of all steel periodical display rack shall be 900mm(w)x450mm(d)x1830mm(h). rigid knockdown construction ,panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing single side book rack - 900x315x1850 material – 0.7mm thick (+/-0.07mm) crca for top,side and shelf.finish epoxy powder coated to the thickness of 50 micron, providing and supplying storage with overall dimensions of store up 600 w main bond wht shall be 600 mm w x 326 mm d x 785 mm h . the construction shall be aesthetically appealing completely knock down construction made from 0.6 mm thk. crca as per is - 513 . horizontal stiffener shall be made from 1.2 mm thk. crca as per is - 513 . the doors shall be made from 18 mm thk. interior grade pre-laminated board as per is - 12823 or 18 mm thk . plain particle board as per is -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per is - 2046 on either side . all edges shall be duly sealed with 2 mm thk. pvc edge banding . two door with single lock on rh door . locking shall be 10 lever cam lock lever at the bottom of the door .shelving shall be heightwise adjustable shelf 1 no. uniformly distributed load capacity of 25 kg udl .the finish shall be epoxy powder coated to the thickness of 50 microns .overall dimensions of store up 600 w wdn door hl pine shall be 298 mm w x 18 mm d x 783 mm h rh side door with lock.298 mm w x 18 mm d x 783 mm h lh side door w/o lock . the doors shall be made from 18 mm thk. interior grade pre-laminated board as per is - 12823 or 18 mm thk . plain particle board as per is -3087 with 0.6 thk. with 0.6 mm thk. decorative laminate and 0.6 mm thk. backing laminate as per is - 2046 on either side . all edges shall be duly sealed with 2 mm thk. pvc edge banding . it shall have two door with single lock on rh door . the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying eco wooden storage range comprises of a range of low height to medium heightwooden hdu and sdu as per attasched dmx drg.body : body is made from 18mm plb with all the edges sealed with 0.8 mm thick pvc edgeband. the back panel is 9mm white plt. the entire construction is ready to assemble unit and is assembled with suitable kd fittings.the shelves and separator panels ( if available ) is made from 18 mm white plt and edges are sealed with 0.8 mm edge band. the bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. doors : door panels ae made from 18 mm plb with 2 mm edge band on alledges ad a flush plastic handle is fitted vertically at the center of the door. the hinge door has suitable hinges and hdu is fitted with an adjustable fitting for height adjustment. the sdu runs in a pvc track mounted on the top and bottom panel of the body. hdu has a three point lock and sdu has a push type lock.all the storages are fitted with a 6 mm leveler at bottom for leveling.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying king bed with overall size :length - 2053.0 mm width - 1875.0 mm height - 1134.0 mm.material:bed structure consist of metal frames made of m.s. 25 mm square pipes in 1.2 mm thickness and m.s. channels in 1.0 mm thickness.partition panels and plinths are made of 25 mm thick prelaminated particle board.head board and tail board are made of 25 mm thick p.v.c. membrane pressed mdf.side board , mattress panels and drawer panels of bed are made of 18 mm thick prelaminated particle board with all the exposed edges edge banded with 2 mm thick pvc edge banding.construction :knock down construction.packets :1 bed in 6 packets.finish :pvc membrane pressed mdf of head board and tail board is in darkchocolate finish18 mm thick prelaminated particle board is in colarain shade. metal frames are powder coated in shade matt black to the thickness of 50 microns(+-10).the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying bed side table .overall size :width : 61cm depth : 45.5cm height : 50.35cm material :top panel of 25 mm and drawer fronts of 18 mm pvc membrane pressed mdf.body and drawer panels are made of 18 mm thick prelaminated particle board .all the exposed edges are edge banded with 2 mm thick pvc edge banding.hardware :the high quality hardware used like roller slides , hinges , minifix, dowels is of make hettich.packets : 1 packet.finish :.18 mm thick prelaminated particle board is in wenge realistic pore. 18 mm and 25 mm pvc membrane pressed mdf is in colarain.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying wardrobe with overall size:width : 88.1cm depth : 54.8cm height : 191cm.material:3 body panels are made of 18 mm thick prelaminatedparticle board 1s:12823 class e1 (as per en13986). all the exposed edges are edge banded with 0.8 mm thick pvc edge banding glued with hot melt eva glue .door are made of 18 mm thick prelaminated particle board is:12823 class e1 (as per en13986) with all the exposed edges are edge banded with 0.8 mm thick pvc edge band glued with hot melt eva glue.drawer components are made of 18 mm thick prelaminatedparticle board 1s:12823 class e1 (as per en13986) .all the exposed edges are edge banded with 0.8 mm thick pvc edge banding glued with hot melt eva glue.body back and drawer bottom are made of 9 mm thick prelaminated particle board is: 12823 class e1 (as per en13986). hardware:the high quality hardware used like roller slides, hinges , minifix, wooden dowels is of make hettich.. lock used for middle door is 3 way lock. lock used for right hand door and drawer is cam lockconstruction :knock down construction. packets : 4 packet.finish :18 mm thick prelaminatedparticle board 1s:12823 class e1 (as per en13986) is in imperial oak shade.lipping shade is 299p make rehau.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying dresser with overall size:width - 900.0 mm depth -600mm height - 201.3 mm.material:body panels are made of 18 mm thick prelaminated particle board all the exposed edges are edge banded with 2 mm thick pvc edge bandin g.mirror door and drower fronts are made of 18 mm thick is made of prelaminated particle board.body back is made of 18 mm thick prelaminated particle board.hardware:the high quality hardware used like hinges, wooden dowels is of make hettich.construction:knock downconstruction.packets:dresser —3 packets finish:18 mm thick prelaminated particle board is in 4504 colarain shade.. only drw front is of 18 mm pvc membrane pressed mdf is in wenge realistic pore 180/01—1539 finish.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing single bed mattress ,pillow,bedsheet with pillow cover ,with 12mm thick prelam mdf back- 900x1950x100mm - goldline plus pu form 40 density 300 gsm cottan satin quilt cover.mattress back putti made of 12mm thick prelam mdf bothside white finish.kurlon dew pillow 600x400 fill: polyester fibre quality of shell fabric: 110 gsm cotton satin patti outer shell layer: cotton fill weight (in gms): 650.bedsheet with pillow 100 percent cotton of bombay dyeing or eq., providing and placing double bed mattress ,two pillow,bedsheet with pillow cover - 1800x1950x150mm - goldline plus pu form 40 density 300 gsm cottan satin quilt cover.mattress back putti made of 12mm thick prelam mdf bothside white finish.kurlon dew pillow 600x400 fill: polyester fibre quality of shell fabric: 110 gsm cotton satin patti outer shell layer: cotton fill weight (in gms): 650.bedsheet with pillow 100 percent cotton of bombay dyeing or eq., supplying and placing of mattress size 2200l x 840w x 100h foam density : 40 +- 2 kg/m3 hardness in kg : 45+-2 as per is:7888 for 25 percent compression stitched upholstery cover material helium heavy a/f f/r sm colour – navy blue, (350 gsm,0.45 thk) with fire retardant and antimicrobial properties. bed matt 100mm thick.., providing and fixing 3 seater pero cross beam made of black powder coated regular ms erw tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-0.014 cm size. legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.seat and back shell to be peforated made from cold rolled m.s. sheet (din 1623 part 1 st -12 grade), 0.14 +/- 0.013 cm thickness. the side bar is made of chrome plate solid steel 3.0 cm +/- 0.03cm x1.2 cm +/- 0.03 cm with fluting and plastic inserts. the shell to be assembled on the cross beam with help of m8 bolts., providing and supplying office table of the following specifications. its size shall be 1200 width x 600 depth x 740 height . the top shall be made from 25 mm thick pre- laminated board . all the edges are sealed with 2 mm thick pvc edge band all around . side panels shall be made from 25 mm thick pre- laminated paticle board . all the edges are sealed with 2 mm thick pvc edge band on the user side and 0.8 mm on the top and bottom side .the side panels have 2 glide screws each for levelling of the desk. modesty panel shall be made from 18 mm thick pre- laminated particle board . all the edges are sealed with 0.8 mm thick pvc edge band all around. freestanding pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm pvc edge band on all the exposed surfaces as per requirement . the drawers are provided with suitable slides for smooth operation . all the pedestal drawers are centrally locked with a single key .drawer slides are of hettich.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying office table of the following specifications its size shall be 1500 width x 750 depth x 740 height . the top shall be made from 25 mm thick pre- laminated board . all the edges are sealed with 2 mm thick pvc edge band all around . side panels shall be made from 25 mm thick pre- laminated paticle board . all the edges are sealed with 2 mm thick pvc edge band on the user side and 0.8 mm on the top and bottom side .the side panels have 2 glide screws each for levelling of the desk. modesty panel shall be made from 18 mm thick pre- laminated particle board . all the edges are sealed with 0.8 mm thick pvc edge band all around. freestanding pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm pvc edge band on all the exposed surfaces as per requirement . the drawers are provided with suitable slides for smooth operation . all the pedestal drawers are centrally locked with a single key .drawer slides are of hettich.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., supplying and stacking of tubular section cardiac table with stainless steel grade 304 of frame of work mounted on four 50 mm castors.etc.(as per photograph), supplying and stacking of tubular section of stainless steel storage rack of size 1200mm(width) x 600mm (depth) and 1800mm height frame of 304 grade steel.etc., providing and placing inquiry counter with worksurface of size w - 3665 x d 1060 x h 750 worksurface and 1350 counter made of - decorative laminate particle board 25mm thick. inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm. rubberized cork – 18mm thick. should have glass frosted of10mm thick diamond cut finishing on edges. inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm *note: angle sustained within arc surface is 60 deg.understructure should have modesty panel ms perforated sheet below worksurface : 0.8 mm (thick) x 665.0mm (height) x 1345.0 mm (flat length) above worksurface : 0.8mm (thick) x 260 mm (height) x 1345.0 mm (flat length). legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm., providing and supplying reception table. reception table of the following specifications. work surface - made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.access flap along with a gromett is provided on work surface for wire management.wire management - power box made with 0.8 mm thick crca (is: 513), with switch plate (8+3 module cut out provision for anchor roma) which is fixed with worktop along the width at access flap position.modesty panel and side skirting - made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.understructure - made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.top shelf - made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.hinge door + drawer unit - made of 18mm thick pre-laminated twin board of e1-p2 grade and approved shade confirming to is-12823:1990, edge banded with matching 2 mm thick pvc lipping.**drawer bottom is made of 5.5thk mdf whiteboard handle is provided for ease of opening.hdu and drawer is provided with cam lock for security.essential accessories - wire riser made of 0.8mm crca (is-513) is provided for proper wire management.organizer plate made of 1.2mm crca (is-513) is provided for magnetic sticky notes.bag hanger hook made of 1.2mm crca (is-513) is provided for bag hanging.length - 2400mmdepth - 1770,870mm.height - 1080mm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying green certified study bench with valid certifications like greenguard gold of 3s fronttype classroom desk.its size shall be 2044 width mm x 698.5 depth mm x 890 height mm. the understructure shall be made with ms erw tube section of size 80 x 40 x 2.5 mm thick with powder coated 50micon(±10). understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolts on to base of 10 mm thick plate for proper resting of structure . plastic clad and shoe main clad made of glass filled 30 percent nylon -6 for covering anchor bolts . the side clads shall be two made of 35 mm thick plt with 2 mm thick pvc lipping . desk side clad made of 18 mm thick plt and seat side clad and connecting clad made of 25 mm thick plt . the desklet shall have an opening and closing mechanism by means of desk slider and slider sleeve made of 30 percent glass filled nylon - 6 . desk compromises of plt desk with aluminium section anodized finish on to sides and tpe rubber on to aluminium section outer side for cushioning effect for desk opening closing . desk made of 18 mm thick plt fixed with aluminium extrusion on to sides for desk opening closing . the seat shall have self closing mechanism which will operate by means of spring . seat understructure is a combination of welded fabricated structure made of 19 x 2 mm thick ms erw tube with powder coated 50microns(±10) which is covered by 0.8 mm thick cr steel, powder coated 50microns(±10) and upholstered with moulded foam inside and leatherite cover. seat back comprises of ply with moulded foam upholstered inside and leatherite cover. the wire carrier shall be made of 0.8 mm thick cr steel powder coated 50microns(±10) suitable for mounting. the switch box shall be made of 1.2 mm thick sheet metal plate mounting suitable for anchor roma plates . the front clad mounting shall be made up of 18 mm thick plt with 1.2mm thk cr steel cover powder coated 50microns(±10) and bracket for holding on to top and mounting box for holding of clad with seat side clad .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying green certified study bench with valid certifications like greenguard gold of 3s midtype classroom desk.its size shall be 2044 width mm x 1080 depth mm x 890 height mm. the understructure shall be made with ms erw tube section of size 80 x 40 x 2.5 mm thick with powder coated 50micon(±10). understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolts on to base of 10 mm thick plate for proper resting of structure . plastic clad and shoe main clad made of glass filled 30 percent nylon -6 for covering anchor bolts . the side clads shall be two made of 35 mm thick plt with 2 mm thick pvc lipping . desk side clad made of 18 mm thick plt and seat side clad and connecting clad made of 25 mm thick plt . the desklet shall have an opening and closing mechanism by means of desk slider and slider sleeve made of 30 percent glass filled nylon - 6 . desk compromises of plt desk with aluminium section anodized finish on to sides and tpe rubber on to aluminium section outer side for cushioning effect for desk opening closing . desk made of 18 mm thick plt fixed with aluminium extrusion on to sides for desk opening closing . the seat shall have self closing mechanism which will operate by means of spring . seat understructure is a combination of welded fabricated structure made of 19 x 2 mm thick ms erw tube with powder coated 50microns(±10) which is covered by 0.8 mm thick cr steel, powder coated 50microns(±10) and upholstered with moulded foam inside and leatherite cover. seat back comprises of ply with moulded foam upholstered inside and leatherite cover. the wire carrier shall be made of 0.8 mm thick cr steel powder coated 50microns(±10) suitable for mounting. the switch box shall be made of 1.2 mm thick sheet metal plate mounting suitable for anchor roma plates . the front clad mounting shall be made up of 18 mm thick plt with 1.2mm thk cr steel cover powder coated 50microns(±10) and bracket for holding on to top and mounting box for holding of clad with seat side clad .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying green certified study bench with valid certifications like greenguard gold of 3s reartype classroom desk.its size shall be 2044 width mm x 751 depth mm x 890 height mm. the understructure shall be made with ms erw tube section of size 80 x 40 x 2.5 mm thick with powder coated 50micon(±10). understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolts on to base of 10 mm thick plate for proper resting of structure . plastic clad and shoe main clad made of glass filled 30 percent nylon -6 for covering anchor bolts . the side clads shall be two made of 35 mm thick plt with 2 mm thick pvc lipping . desk side clad made of 18 mm thick plt and seat side clad and connecting clad made of 25 mm thick plt . the desklet shall have an opening and closing mechanism by means of desk slider and slider sleeve made of 30 percent glass filled nylon - 6 . desk compromises of plt desk with aluminium section anodized finish on to sides and tpe rubber on to aluminium section outer side for cushioning effect for desk opening closing . desk made of 18 mm thick plt fixed with aluminium extrusion on to sides for desk opening closing . the seat shall have self closing mechanism which will operate by means of spring . seat understructure is a combination of welded fabricated structure made of 19 x 2 mm thick ms erw tube with powder coated 50microns(±10) which is covered by 0.8 mm thick cr steel, powder coated 50microns(±10) and upholstered with moulded foam inside and leatherite cover. seat back comprises of ply with moulded foam upholstered inside and leatherite cover. the wire carrier shall be made of 0.8 mm thick cr steel powder coated 50microns(±10) suitable for mounting. the switch box shall be made of 1.2 mm thick sheet metal plate mounting suitable for anchor roma plates . the front clad mounting shall be made up of 18 mm thick plt with 1.2mm thk cr steel cover powder coated 50microns(±10) and bracket for holding on to top and mounting box for holding of clad with seat side clad .the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and placing modular conference table having top thickness approx 25mm prelaminated board with pvc beading all over. legs made up of 18mm thickplt having curved profile. modesty made up of 18mm plt board.should have wire manager. the table should be made by fitting of various top sizes as per layout . differnt size as per seat single seat 675wx600dx750h(mm). the rate shall be single seat only., providing and supplying of stool mch ht adj + back hi base. 1) seat assembly: the seat should be made up of 1.2±0.1cm thick flat plywood and with moulded polyurethane foam and should be .upholstered with replaceable synthetic leather covers.seat size: diameter 40.0 cm adjustments: 360° revolving type 2) back. assembly: the back foam should be designed with contoured lumbar support for extra comfort. the upholstery should be available in synthetic leather. *back size: 45.0 cm (w) covered with polyurethane foam 3)high resilience (hr) polyurethane. am:the_hr.polyurethane foam should be _moulded with density equal 45 +1-2 kg/m3 and hardness load 16 ± 2 kgf for 25 percent compression4)height adjustment: the manual height adjustment should be very easy to operate with a help of a knob.. it can be easily locked at the most comfortable position. 5)pedestal assembly: the five-prong pedestal should be fabricated from 0.2 ± 0.02 cm :thick hr sheet.( should be :. dd 1079 / hr ), powder coated ( dft 40-60 microns ) and fitted with an injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal-should be 55.0±0.5cm pitch-circle-diameter- (65.0±-1,0cm-with-castors).-circular-foot-ring of 052.0±0.2cm made up of 01.9±0.2 x 0.12±0.0096cm thk ms erw tube for foot support in high-base stool. 6)twin wheel castors: the twin wheel castors should be injection moulded in black nylon. width- 65.0cm, depth- 65.0 cm, height- 88.0cm to 99.5cm seat height- 67.0 to 78.5cm. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of trolly should have of instrument trolley- ss 304 sheet should be provided at top for the placement of the instruments being used and also for easy in portability. ss 304 sheet should be provided at the top as well as bottom shelf for keeping the instrument being used. horizontal bars should be welded with legs so as to provide protection at sides with supporting legs giving a sturdy look. castors of 125mm dia. should be used for easy in movement. overall dimension: 775mm x 531mm x 915mm h. maximum safe working load must be 40kg.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying of overall dimensions of vsdu - 2 shall be 900mm(w)x450mm(d)x735mm(h) . the top shall be wooden top plb(25 mm add in unit height ) .the rigid knock down construction , back , sides and door shall be made from 0.7 mm high yield strength crca ,rest in 0.8 mm crca . crca - d grade as per is-513 . sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door and less noise . locking shall be 5 lever cam lock for safe locking . handle shall be plastic flush and recessed handle . shelving shall have height wise adjustable shelf mounting . uniformly distributed load capacity of the shelf is 40 kg maximum . vsdu - 2 shall have 1 no. of adjustable full shelf . accessories optional shall be cradle with pipes for hanging godrej instadex files . leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . for vsdu 2 - a4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying back unit of the following specifications.2350x500x1800 top panel:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade , edge banded with matching 2 mm thick pvc lipping.slide door unit:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade , edge banded with matching 2 mm thick pvc lipping for body panels like side, bottom,back and shelves. shutters are made of 25mm thick mdf one side pre-laminate board with 0.4mm pvc membrane pressed on to top.shutters have a soft closing and anti slam mechanism.handles are provided for ease of opening.storage is provided with lock for security.display/storage unit:made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade , edge banded with matching 2 mm thick pvc lipping for body panels like side,back and shelves.doors are made of 25mm thick mdf one side pre-laminate board with 0.4mm pvc membrane pressed on to top.top panel of display unit made of 25mm thick mdf one side pre-laminate board with 0.4mm pvc membrane pressed on to top.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying cushion backpublic seating. seat shell : the seat is made from high density self-skin polyurethane foam reinforced with 1.2 mm m.s. perforated sheet insert. the polyurethane foam having density of min. 350 kg/m3 with a shore a hardness of 60±10.seat size : 52.0 cm (w) x 50.5 cm (d).back shell : the back is made from high density self-skin polyurethane foam reinforced with 1.2 mm m.s. perforated sheet insert.the polyurethane foam having density of min. 350 kg/m3 with a shore a hardness of 60±10.back size : 52.0 cm (w) x 53.5 cm (h).cross beam : cross beam made up of diamond shaped double wall extrusion of aluminum 6063-t6 alloy with coated of 50 micron epoxy polyester coating and fitted with polypropylene copolymer engineering plastic end caps.cross beam size : 11.3 cm (w) x 9.4 cm (h) x 0.4 cm (thickness).leg : legs are made up of high pressure aluminum adc12 die cast coated with 50 micron epoxy polyester coating, leg are fitted with soft grip pvc level adjusting shoes.armrest : armrest are made up of high pressure aluminum adc12 die cast coated with 50 micron epoxy polyester coating.seat support bracket assembly : seat support bracket assembly made up of argon shield welding of hot rolled steel (is: 2062) 0.3cm thickness. this welded structure is coated with 50 micron epoxy polyester coating.cl ing bracket : cl ing bracket are made up of hot rolled steel (is: 2062) 0.3cm thickness coated with 50 micron epoxy polyester coating.overall dimensions of chair-seat height - 42.5 cm.height - 87.0 cm.width-218.5cm and depth-66.5 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying leatherette chair of two seater sofa. seat foam : the seat is made up of pu foam in density 28 ±2 kg/cu.mtr with an additional top layer of supersoft pu foam in density 32 ± 2 kg/cu, upholstered with fabric or leatherette.back foam : the back is made up of pu foam in density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette.understructre : understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance and termite proof as per is:303] and pinewood of cross sections devoid of major knots and surface defects. 6 nos. per seat and 3.8mm dia zigzag spring assembly is mounted over understructure for cushioning purpose.leg assembly : it is a welded assembly made in stainless steel (grade ss 202) tube and plate with plastic endcap.width (w): 146.0 cm. depth (d): 90.5 cm. height (h): 85.5 cm. seat height (sh): 45.0 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying high back chair. seat/back a ssembly: the seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.the back is made up of injection mou1ded glass filled nylon and upholstered using mesh fabric with high tenacity yarn.* seat size : 47.0 cm. (w) x 51.5 cm (d)* back size : 45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per is:7888 for 25 percent compression.armrests : the adjustable armrest is designed with the following features :• up-down adjustment- 8 steps (8 0±0.scm range)• height adjustable armrest structure which is powder coated and fitted with an armrest top.• fixed armrest top is pu moulded over metal insert.lumbar support assembly: the lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.front pivot synchro mechanism: the adjustable tilting mechanism is designed with the following features.• 360° revolving type.• single point control.• front-pivot for tilt with feet resting on ground ensuring more comfort.• tilt tension adjustment.• 4-position locking with anti-shock feature.• seat/back tilting ratio of 1:2.pneumatic height adjustment. the pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.pedestal assembly : the pedestal is injection moulded in black 30 percent glass filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch center dia is 66.1± 0.5 cm.twin wheel castors: the twin wheel castors are injection moulded in black nylon.neckrest : the neckrest assembly consist of polypropylene pad with moulded polyurethane foam and covered with polyester fabric neckrest is fixed to back assembly through neckrest connector neckrest assembly has height adjustment of4.2 ± 0.5 cm and rotation adjustment of overall76°+ 2°. the complete neckrest assembly is retro fit to the main chair.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplyin .mid back chair. seat/back a ssembly: the seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood measured.the back is made up of injection mou1ded glass filled nylon and upholstered using mesh fabric with high tenacity yarn.* seat size : 47.0 cm. (w) x 51.5 cm (d).* back size : 45.0 cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per is:7888 for 25 percent compression.armrests : the adjustable armrest is designed with the following features :• up-down adjustment- 8 steps (8 0±0.scm range)• height adjustable armrest structure which is powder coated and fitted with an armrest top.• fixed armrest top is pu moulded over metal insert.lumbar support assembly: the lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.the height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.front pivot synchro mechanism: the adjustable tilting mechanism is designedwith the following features.• 360° revolving type.• single point control.• front-pivot for tilt with feet resting on ground ensuring more comfort.• tilt tension adjustment.• 4-position locking with anti-shock feature.• seat/back tilting ratio of 1:2.pneumatic height adjustment. the pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.pedestal assembly : the pedestal is injection moulded in black 30 percent glass filled nylon and fitted with 5 nos. twin wheel castors. the pedestal pitch center dia is 66.1± 0.5 cm.twin wheel castors: the twin wheel castors are injection moulded in black nylon.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and supplying classroom chair. seat / back: the seat sub-assembly should be made up of 1.2±0.1cm thk plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the seat can tip-up when not in use and thshould be feature can be used while stacking the chairs horizontally the back sub-assembly should be made up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. the contoured back with width extension at the bottom should be a should be designed to give comfort to lower back. the back flexing features allows the back to tilt by 9c±2 to aid the user in adopting a comfortable reclining posture. both these sub-assemblies should be fixed to the tubular structure, back size: 45.2cm (w) x 44.6cm (h). seat size: 47.0cm (w) x 50.0cm (d)tubular frame structure: the powder-coated 4 leg structure should be made of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk m.s. e.r.w. tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk m.s. e.r.w. tube to form the tubular frame assembly. the legs should be provided with injection-moulded adopter bush in black nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ the chairs can be stacked horizontally when not in use_polyurethane foam: the polyurethane foam should be moulded with density equal 70.0 ±8.0 kg/m3 and hardness equal 12 ±2 for seat and 16 ±2 for back at 25 percent compression. armrests: the armrest structure should be made up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk m.s. e r.w. tube welded to the tubular frame structure and having a scratch-resistant tant abs arm top.twin wheel castors:the twin wheel castors should be injection moulded in black.overall dimensions of chair-seat height - 47.5 cm.height - 89.0cm.width and depth of chair as measured from base- width-64.4cm and depth-64.5 cm.the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge., providing and fixing tile based modular recta workstation including metal top supporting pedestal as per mentioned details. panel thickness as 52.4 thk and height – 1190 mm including powder coated aluminium trims. the 52.4mm panel comprises of 2 nos. of vertical trims made of aluminium extrusions. horizontal trims made of aluminium extrusions at every division of tile/block. blocks made out of a composite construction of mdf and paper honeycomb. 1 no. of fabricated bottom frame as a welded structure of steel components. 2 nos. of bottom tiles. 2 nos. of top tiles. 1 no. of top trim made of aluminium extrusions. these panels are supported on legs with levelers at various locations depending on the layout requirements. required panels can be joined to each other directly with different joinery. die cast powder coated aluminum alloy adc 12 caps should be used for these joineries blocks - a block for 52.4mm panels thickness comprises of 38mm thick paper honeycomb + 3mm mdf on each sides + 0.6mm decorative laminate or fabric on both sides. particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables.-these blocks should be located in the mid segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the worktops). bottom frame - fabricated bottom frame for 52.4mm panel comprises of l-channels made of 2mm thick crca steel (is: 513), formed plates of 3mm thick hr steel (is:2062) and erw steel tube of size 35x15x1.6mm thick in oval cross section (is: 7138) welded together. this frame is bolted to the uprights with m6 screws.split top tiles for 52.4mm thick panel — 1) fabric magnetic tiles are fabric upholstered metal tiles in 0.6 mm thick g.i. grade o as per is: 277. the fabric is upholstered with adhesives 2) white board tiles are made of 8.0 mm thick particle board conforming to is: 12823 laminated with 0.6mm thick white glossy high pressure laminate on outer side and 0.6mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick pvc edgingbottom tiles for 52.4mm thick panel — plain metal tiles are powder coated metal tiles in 0.8 mm thick m.s. crca grade d as per is: 513. all bottom tiles are press fitted on to the assembly frame of the panel with the help of snap on clips made of nylon-66 and support clips made from pp co polymer. aluminum extrusions. - the top trims and end trims are made from aluminum extrusion having material al96063-t6. all kinds of extrusions for have average wall thickness of 1.2 mm and having finish of powder coating. top trim in 52.4 mm thick panel press fitted on the horizontal extrusion. end trim for 52.4 mm thick panel slide fitted with the help of end trim connector made from 2.0 mm thick m.s. crca grade d as per is: 513. work top shall be made of 25mm thick pre laminated mdf board conforming to is14587:1998. all the edges of work surface shall be provided with machine pressed 2 mm thick pvc lipping glued with hot melt eva glue. the work surface shall be provided with circular cut out of dia.65mm as per the requirement, for passing of wires. these cut outs shall be provided with abs covers. work top size should be 1200w x 600d in mm. work surface bracket mounted on to the horizontal extrusion. work surface bracket made from 2.0 mm thick crca grade d steel as per is: 513-19. 6 numbers of ribs are provided in the work surface for strengthening purpose. all the work surface are mounted on the work surface through round philips head diameter 4 mm x 19 length having finish zinc plated blue. holder bracket made from 2.0 mm thick crca grade d steel as per is: 513-19. it is slid in between end trim and vertical extrusion and mounted on work surface with the help of pop rivet, diameter 5/32 x 1/ length.the panel legs used for supporting panels. the height of a panel leg is 126mm. panel legs are fabricated by co2 welding ms tube of section 38 mm x 25 mm (is: 7138 erw tube, 38 mm x 25 mm x 16bg) with the base plate of the ms plate of 35x22x5mm (is: 2062, 5 mm hr) over which an m8 leveler is fitted, which allows for adjustment of the height by 50mm and coated with min. 45 micron thickness of epoxy powder coating.the single side legs used for supporting panels and work surface on one side only. single side legs are fabricated by co2 welding ms tube of section 38 mm x 25 mm (is: 7138 erw tube, 38 mm x 25 mm x 16bg) with the base plate of the ms plate of 35x22x5mm (is: 2062, 5 mm hr) over which an m8 leveler is fitted, which allows for adjustment of the height by 50mm and coated with min. 45-micron thickness of epoxy powder coating. the double side legs used for supporting panels and work surface on both sides. double side legs are fabricated by co2 welding ms .tube of section 38 mm x 25 mm (is: 7138 erw tube, 38 mm x 25 mm x 16bg) with the base plate of the ms plate of 35x22x5mm (is: 2062, 5 mm hr) over which an m8 leveler is fitted, which allows for adjustment of the height by 50mm and coated with min. 45-micron thickness of epoxy powdercoating. able duct is made from 0.8 mm thick m.s. crca grade d as per is: 513 - 1994. it is constructed with two parts, one is body and another is cover. it holds the cables and gives aesthetic appearance by covering all cables entry, which are moving upward to the panels. pedestal – 3 drawer (2box + 1 file) metal finish top supporting pedestal with central locking arrangement of size 390w x 435d x 720h in mm. the rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.

Contact Information