|
Tender For Repair To Furniture Under Age (I) Dappar.- 1 Charpoy Gi Pipe Plywood Top (Fd-220) 2 Removing Of Unserviceable Plytop From Charpoy And Supply And Fix New 6X3X12Mm Thick Plywood Top Bwr Grade Fixed With Inculding Nuts , Washers And Bolts To Frame Work, Complete All As Specified And As Directed By Engineer-In-Charge. 3 Removing Of Old Unserviceable/Broken Elbow And Supply & Fix New 03 Way Gi Elbow 70Mm Long Of 32Mm Dia Isi Marked And Fixing In Position, Complete All As Shown On Drawing (Wt. Not Less Than 420Gm Per Elbow) 4 Removing Of Old Unserviceable/Broken Check Nut And S&F New 06Mm Thick Isi Marked Gi Check Nut Of 32Mm Dia, Complete All As Shown On Drawing. 5 Welding To Broken Joints Of Charpoy Gi Pipe, Complete All As Directed By Engr-In-Charge. 6 Removing Of Old Unserviceable Long Rail From Existing Charpoy Gi Pipe And Supply & Fix New Long Rail Of 32Mm Dia Medium Grade Gi Pipe, Isi Marked And Threading The Same 22Mm Long At One End 52Mm Long At Other End Anf Fixing In Position, Complete All As Showm On Drawing. 7 Cutting And Converting The Old Unserviceable Long Rail As Retrieve Vide Srl No. 1.05 Here-In-Before Into Two Short Rails And Fixed To Charpoy Gi Pipe Duly Threaded 22Mm Long At Both Side End Including Removal Of Old And Broken Threaded Short Rails, Complete All As Directed By Engr-In-Charge. 8 Table Centre (Fd-274) Removing Of Old Unserviceable Top From Table Centre And S&F New Top Made Out 18/19Mm Thick Exterior Grade Pre-Laminated Praticle Board Teak Faced With 4Mm Thick Wood Beading All-Around The Top Of Teapoy Wooden, Complete All As Directed By Engr-In-Charge. 9 Table Peg (Fd-277)Removing Of Old Uunserviceable Top From Peg Table And S&F New Top Made Out Of 18/19Mm Thiick Exterior Grade Pre-Laminated Praticle Board,Teak Faced, Isi Marked With 4Mm Thick Teak Wood Beading All Around The Top Of Peg Table, Complete All As Directed By Engr-In-Charge. 10 Table Dinning 6 Pers (Fd-273)Removing Of Old Unserviceable Top From Table Dining 06 Personsand Supply And Fixing New Top Made Out Of 18/19Mm Thick Pre-Laminated Particle Board, Teak Faced With 4Mm Thick Wood Beading All Around The Top Of Table Dining 06 Persons Complete All As Directed By Engineer-In-Charge . 11 Chair Writing (Map) Fd/E6/Map/12 12 Replacement Of Old Unserviceable Seat And Back Of Chair With New Seat Of 12Mm Thick Plywood Commercial Quality (Isi Marked) Coverd With 75Mm Thick U Foam And Best Quality Of Tapestry Cloth. The Backshall Be 6Mm Thick Plywood Commercial Quality (Isi Marked) Fixed To Frame With Screw And Covered With 40Mm Thick U Foam Over Shape And Best Quality Of Tapestry Cloth. Seat And Back Fixed On Frame With Screw And Including All Minor Repairs With Welding To Steel Frame Etc, Complete All As Specified And As Directed By Engineer-In-Charge. 13 Replacement Of Old Unserviceable Broken Arm Rest With New Arm Of Black Integral Skin Polyurethane Reinforced With Ms Insert And All Shall Be Scratch And Weather Resistant Of Chair Briefing Static Base, Complete All As Directed By Engr-In-Charge. 14 Chair Dinning (Map) Fd/E6/Map/10 (R)Removing Old Broken Unserviceable Front Legs From Chair Dining And S&F New Fronts Legs Of 1St Class Hard Wood Reak Wood As Per Shape And Size Shown In Drg, Complete All As Directed By Engr-In-Charge. 15 Sofa Set 04 Seater & 05 Seater With Cushion Fd-281 16 S&F Of Foam Cushion Of Size 22\ X 21\ ,100 Mm Thick 32 Density Duly Covered With Best Tapestry Cloth Of Approved Quality And Colour, Complete All As Directed By Engr-In-Charge. 17 Removal Of Tapestry Cloth From Existing Seat/Back Of Sofa Set 04 & 05 Seater And S&F New Tapesty Cloth From Existing Seat/Back Of Sofa Set 04 Seater & 05 Seater And Providing New Tapestry Cloth Dcm/Handloom Long Cloth Of Approved Shade Of Indian Make And Fixing The Same All As Per Drawing, Complete All As Directed By Engr-In-Charge. 18 Almirah Large Steel & Almirah Medium Steel (Fd-1031) 19 Removing Of Old Unserviceable Handles From Almirah Large Steel & Almirah Medium Steel And S&F New Cp Steel Handle Of Exisiting Size To Almirah Large Steel As Shown On Drawing, Complete All As Directed By Engr-In-Charge. 20 Removing Of Old Unserviceable Lock From Almirah Large Steel & Almirah Medium Steel S&F New Brass Lock 75Mm Long, 06 Lever With Two Keys To Almirah Steel All As Shown On Drawing, Complete All As Directed By Engr-In-Charge. 21 Removing Of Old Unserviceable Butt Hinges Of Almirah Steel And S&F New Butt Hinges 75Mm Long And Adjusting Door By Revitting / Welding Complete All As Shown On Drawing, Complete All As Directed By Engr-In-Charge. 22 Locker Bed Side Steel (Fd-257) 23 Replacement Of Old Unserviceable Hasp And Staple With New 100Mm Long Ms Chromium Plated Hasp And Staple All As Shown Drg, Complete All As Directed By Engr-In-Charge. 24 Replacement Of Old Unserviceable Bow Handle With New 100Mm Long Cp Steel Bow Handle All As Shown Drg, Complete All As Directed By Engr-In-Charge. 25 Removing Of Old Unserviceable Ms Hinges Of Locker Bed Steel And S&F New Ms Hinges 65Mm Long With Gas Welding / Revitting Complete All As Shown On Drawing, Complete All As Directed By Engr-In-Charge. 26 Charpoy With Ply Top , Bed Hard Fd / Map-Ii / 01Removing Of Old Unserviceable Plytop From Charpoy With Hard Top And S&F Of 12Mm Thick Plywood Of Suitable Size , Isi Marked, Bwr Bonded Commercial Plywood With Unpolished Edging Of Approved Quality All As Shown On Drg, Complete All As Directed By Engr-In-Charge. 27 Bed Hard (Map) Fd/E6/Map/08 (R) 28 Removing Of Old Unserviceable Plywood 12Mm Thick Bwr Grade (Make : Century Ply/Archid Ply) As Exising Shape And Sie With 8 Nos Shunken/Bolt Appropriate Whole Shall Be Make With Electric Drill Machine Complete Rest All As Drg And Directed. 29 Removing Unserviceable Head Board Form Bed Hard Steel And Fix New 18Mm Thick Prelaminated Particle Board With Pvc Edging All As Shown On Drg And Complete All As Specified And As Directed By Engnieer-In -Charge. 30 Removing Unserviceable Foot Board Form Bed Hard Steel And Fix New 18Mm Thick Prelaminated Particle Board With Pvc Edging All As Shown On Drg And Complete All As Specified And As Directed By Engnieer-In -Charge. 31 Polish :- Material And Labour For Complete Removing/Scrubbing Of Entire Old Polished Surfaces Of The Following Items With Appropriate Sand Paper / Emary Paper Etc, Including Preparation Of Old Wooden Surfaces By Applying Seina/Burnt Seina Uniformally For French Polish In Order To Obtain The Required Glossy Finish And Applying Two Coats Of French Polish To The Following Wooden Furniture Items To The Entire Satisfaction Of Engr-In-Charge And All As Directed. 32 Chair Dining Fd - 279 33 Table Peg Fd- 277,384 34 Table Centre Fd-235,274 35 Table Dining 06 Person Fd- 239, 273 36 Sofa Set 05 Seater With Cushion Fd-281, Fd/Map-Ii/02 37 Painting :- M&L For One Coat Of Painting By Means Of Spray Painting With Synthetic Enamelled Paint Of Appropriate Shade And Quality To Steel Furniture Items (Internally & Externally Complete) Including Removing Of Dents & Filling With Putty After Preparation Of Surfaces Thoroughly By Using Appropriate Abrasive Cloth Emery As Required As Trade Practice Complete All As Specified And As Directed By Engineer-In-Charge To The Following Steel Furniture Items :- 38 Almirah Large Steel With Shleves Fd-1031
|
