Tenders Are Invited For Procurement Of Various Sizes Of Cast Iron Sleeve Type Coupling And Gi Elbow 1, Heavy ... in Philippines

Work Detail

Galvanizing: Zinc Hot Dip Galvanized To Minimum Of 500Gr/M² With Minimum Average Thickness Of 70 Micron Grade Of Material: W400-05 Or B350-10 Design Test Pressure: 6Mm - 100Mm (100 Bar), 125Mm - 150Mm (64 Bar), - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length, - Middle Ring Shall Not Be Less Than 6.35Mm Thickness And Should Be 178Mm Long - Bolts, Nuts And Washers Shall Be Hot-Dipped Galvanized - Bolts And Nuts Should Be 5/8 X 11 In Diameter And Length - Bolts Threaded On Both Ends: 3 1/4 Thread Length

Contact Information